LogTag UTREL-16F User manual

Version A
www.logtag-recorders.com
Quick Start Guide
°C
REC

What’s Included 3
Downloading LogTag Analyzer 4
Conguring your UTREL-16 6
Starting your UTREL-16 7
During Recording 8
Downloading Results 9
Quickstart Guide Contents

Page 3
What’s Included
Please check you have the items shown below before
continuing with setting up your UTREL-16.
UTREL-16
Optional:
Buffer assembly
(Not included)
Wall mount
(Not included)
ST10 External
Probe
(Not included)

Page 4 Page 5
Downloading LogTag
Analyzer
Warning: Please ensure no other LogTag software is
currently running on your computer before running the
Analyzer software.
To download the latest LogTag Analyzer, open your
browser and navigate to:
https://logtag-recorders.com/de/support/
1. Click ‘Go to downloads page’ to take you to the
download page.
2. Click ‘Download Now’ to start the download.
3. Click ‘Run’ or ‘Save File’ then double-click the
downloaded file to open the LogTag Analyzer Setup
Wizard.

Page 5
Downloading LogTag
Analyzer continued...
Note: If you already have LogTag Analyzer installed,
please see whether you need to update to the latest
version by clicking ‘Check Internet for updates’ from
the ‘Help’ menu.
4. Follow the on-screen prompts to install LogTag
Analyzer.
5. Click ‘Finish’ to exit the LogTag Analyzer Setup
Wizard.

Page 6
Conguring your
UTREL-16
Connect your UTREL-16 to
the computer via the USB
port. The USB socket on
the device is located on the
bottom, protected by the cap.
Connect your UTREL-16 to
the computer via the USB
port. The USB socket on
the device is located on the
bottom, protected by the cap.
Connect your UTREL-16 to
the computer via the USB
port. The USB socket on
the device is located on the
bottom, protected by the cap.
°C
REC
1. Open LogTag Analyzer.
2. Click ‘Configure’ from the ‘LogTag’ menu or click
the ‘Wizard’ icon.
3. Adjust your logger configuration settings as
required. For more information on configuration
settings, please refer to Configuring UTREL-16 in the
Product User Guide or press ‘F1’ for help from your
keyboard.
4. Click ‘Configure’ to upload the configuration
settings to the logger.
5. Click ‘Close’ to exit the configuration page.

Page 7
Starting your UTREL-16
Press and hold the
START/MARK button.
REC symbol will appear.
Release the button once
REC stops flashing.
The UTREL-16 now
records temperature data.
Display overview:
Recording
Indicators
Recording
Indicators Temperature
units
Temperature
Min/Max
Indicators
Alarm Threshold
Markers
Battery Low
Symbol
Above/Below
Threshold Arrows
Alarm/OK
Indicator
Mark Indicator
Clock
Please ensure the sensor is connected before starting
your UTREL-16.

Page 8
During Recording
• END OF PAGE
The currently stored Min/Max temperature values can
be reset at any time while the unit is recording, but not
once the unit has been stopped. To reset the values,
please refer to the Product User Guide.
To view other information about clearing alarms and
reviewing Min/Max trip temperatures, please also refer
to the Product User Guide.
Reset Trip Min/Max Temperatures:

Page 9
Downloading Results
By default, auto-download is enabled in LogTag
Analyzer so when you open the program, data results
will be displayed after connecting your UTREL-16 to
the computer.
1. Open LogTag Analyzer.
2. Click ‘Download’ from the ‘LogTag’ menu or
press F4.
3. Click ‘Close’ to exit the download page.
Alternatively, you can download and view data on
LogTag Analyzer.
Connect your UTREL-16 to the
computer via the USB port. The
USB socket on the device is
located on the bottom, protected
by the cap.
Connect your UTREL-16 to
the computer via the USB
port. The USB socket on
the device is located on the
bottom, protected by the cap.
°C
REC
A new device drive will appear in file
explorer with the files containing the
recorded data.