LogTag UTREL30-WIFI User manual

Version A
www.logtagrecorders.com
Quick Start Guide

What’s Included 3
Battery Installation 4
Downloading LogTag Analyzer 5
Running the Connection Wizard 7
Connecting to your WiFi Network 10
Configuring your UTREL30-WiFi 13
Installing the Wall Mount 14
Starting your UTREL30-WiFi 15
LogTag Online 16
Quickstart Guide Contents

Page 3
What’s Included
Please check you have the items shown below before
continuing with setting up your UTREL30-WiFi.
UTREL30-WiFi
Glycol Buffer
(Not included)
ST10 External
Probe
(Not included)
USB Cable
2x AAA Battery
(Not included)
Wall mount
(Not included)

Page 4
Battery Installation
1. You will need a small Phillips (cross-shaped)
screwdriver to remove the cover on the back of the
UTREL30-WiFi case.
2. Once you have removed the battery cover, install
the two AAA batteries. Take note of the direction
each battery must be installed.
3. Once both batteries are securely installed, replace
the battery cover and secure via the screw provided.
AAA batteries are another backup power source to
ensure your device continues to record in the event
of a power outage or is unplugged.
The USB cable is the main power method to power
the UTREL30-WiFi unit permanently via the USB
socket.

Page 5
Downloading LogTag
Analyzer
Warning: Please ensure no other LogTag software is
currently running on your computer before running the
Analyzer software.
To download the latest LogTag Analyzer, open your
browser and navigate to:
https://logtagrecorders.com/software/LTA3/
1. Click ‘Go to downloads page’ to take you to the
download page.
2. Click ‘Download Now’ to start the download.
3. Click ‘Run’ or ‘Save File’ then double-click the
downloaded file to open the LogTag Analyzer Setup
Wizard.

Page 6
Downloading LogTag
Analyzer continued...
Note: If you already have LogTag Analyzer installed,
please see whether you need to update to the latest
version by clicking ‘Check Internet for updates’ from
the ‘Help’ menu.
4. Follow the on-screen prompts to install LogTag
Analyzer.
5. Click ‘Finish’ to exit the LogTag Analyzer Setup
Wizard.

Page 7
Running the Connection
Wizard
The first page of the Wizard will be displayed.
When you’re ready to begin, click “Start”.
Open LogTag Analyzer and select ‘Connection Wizard
from the ‘LogTag Online’ menu.
Please ensure there is internet connection on your
computer prior to starting this process.
Pl
ease ensure t
h
ere
i
s
i
nternet connect
i
on on
y
our
computer pr
i
or to start
i
n
g
t
hi
s process
.
You will be asked to sign in to your LogTag Online
account. If you do not have an account, click the link

Page 8
Running the Connection
Wizard continued...
below or alternatively, open your browser, type the
following link into the address bar and follow the
on-screen instructions.
https://logtagonline.com/signup
or click Create a LogTag Online Account link.
Note: If you ‘Skip’ this step, you will need to manually
register the device on LogTag Online or repeat the
LogTag Online Connection Wizard.
Click ‘Sign In’ after you have entered your login details
to continue setting up WiFi on your UTREL30-WiFi.

Page 9
The Wizard will now
scan for any connected
LogTag devices.
If the scan doesn't find
any devices, double-
check the device is
plugged in to your
computer with the USB
cable provided and click
“Scan Again”.
As soon as a device
has been identified, it
will appear in the table
(left) and automatically
register that device to
your LogTag Online
account.
Running the Connection
Wizard continued...
You have now created your account and is now
ready to set up connection of your UTREL30-WiFi to
the WiFi network.
Y
ou
h
ave now create
d
y
our account an
d
i
s now
read
y
to set u
p
connection o
f
y
our UTREL30-WiFi to
the
WiFi
n
et
w
o
r
k.

Page 10
The Status will turn green
with the text “Registered”
once complete.
1. Network settings are automatically populated
from PC settings by default, if it can be discovered.
Alternatively, click the Network Name arrow to see
Connecting to your
WiFi Network
If one or more device(s) are identified and registered,
the screen automatically switches to the next screen
If one or more device
(
s
)
are identified and re
g
istered,
t
h
e screen automat
i
ca
lly
sw
i
tc
h
es to t
h
e next scree
n

Page 11
nearby Wireless Networks options and select your WiFi
Network from the list and type the password for the
network. Remember that passwords are
case-sensitive.
Note: If you need to make any Advanced Network
setting changes, select the ‘Advanced Settings’ box.
2. Once you have provided the chosen network and
password, or Advanced Network settings, click “Next”.
Note: Some WiFi Networks won’t appear in this list for
security purposes. If you are aware that your network
is one of these, you can manually type the name of
your network (SSID) in the Network Name field instead
of clicking the menu arrow.

Page 12
Once the Wizard displays “Connection Succeeded”,
click “Close” to close the Wizard or click the ‘LogTag
Online Sign In page’ link to take you to LogTag Online
website.
The device is now being configured with the WiFi
details you provided in the previous screen, which
typically takes 10 seconds.
The Connection Wizard is now checking that the
UTREL30-WiFi can connect to your WiFi network and
to LogTag Online...

Page 13
Configuring your
UTREL30-WiFi
Connect your UTREL30-WiFi
to your computer via the USB
cable provided. The USB
socket on the device is located
on the bottom, protected by a
rubber seal.
1. Open LogTag Analyzer.
2. Click ‘Configure’ from the ‘LogTag’ menu or click the
‘Wizard’ icon.
3. Adjust your logger configuration settings as
required.
For more information on configuration settings, please
refer to Configuring the UTREL30-WiFi in the Product
User Guide or press ‘F1’ for help.
4. Click ‘Configure’ to upload the configuration settings
to the logger.
6. Click ‘Close’ to exit the configuration page.

Page 14
Installing the Wall Mount
Setup of your UTREL30-WiFi is complete.
Attach the Wall Mount Bracket on the side of your
refrigerator or freezer, preferably at eye-level with the
adhesive strip provided with the Wall Mount.
Before sticking on the Wall Mount, make sure the
sensor cable and the USB cable from the
UTREL30-WiFi can both reach the device comfortably
without obstruction or at risk of being accidentally
disconnected if knocked.
Insert the UTREL30-WiFi
into the Wall Mount, connect
the USB and sensor cables.
The display should show the
word “READY” as seen in
the image (right).
Note: both the cloud and
WiFi symbols are showing in
the top left with a tick in each
to confirm successful setup
of the device.

Page 15
Starting your
UTREL30-WiFi
Press and hold the
START/CLEAR/STOP
button.
STARTING will appear
along with READY.
Release the button once
READY disappears.
The UTREL30-WiFi now
records temperature
data.
The Logger will not start
if:
• You release the
button before READY
disappears.
• You keep holding the
button for more than 2
seconds after READY
disappears.
• The backup battery
is critically low and
the Logger is not
connected to power.

Page 16
LogTag Online
LogTag Online is a secure online service that stores
the data recorded from your logger against your
account.
Signing in to your LogTag Online Account
Open your browser and navigate to:
https://logtagonline.com
1. Type your Email and
Password, then click “Sign In”.
Note: If you did not create an
account during the Connection
Wizard process, click the
‘Create an Account’ link and
follow the on-screen instructions.
Upon signing in, you will see the main Dashboard with
the Location automatically created.
If you cannot see the Location, manually register the
device by clicking the green ‘Register Device’ button
in the ‘Recently Registered Devices’ section of the

Page 17
main dashboard or select the Devices menu from the
bottom navigation bar.
For more information about registering Devices or
Locations, please refer to the ‘Devices’ or ‘Locations’
section in the LogTag Online Quick Start Guide.
Once the device is registered, the location is
automatically created and will appear in Pinned
Locations on the Dashboard or in the Locations
section in the bottom navigation bar
Once the device is re
g
istered, the location is
automat
i
ca
lly
create
d
an
d
w
ill
a
pp
ear
i
n
Pi
nne
d
Locatio
n
s
o
n
the
Dashboa
r
d
o
r
i
n
the
Locatio
n
s
sect
i
on
i
n t
h
e
b
ottom nav
ig
at
i
on
b
a
r