Loll Designs Bolinas SA-BCT-CG User manual

1. 2. 3. 5. 4.
ASSEMBLY TIPS:5 Important Points You NEED to Read
Prior to beginning assembly, please inspect and inventory the parts to make sure you have everything and that nothing was damaged during shipping. If damage has occurred, please take photos and go to lolldesigns.com/damage. Rest assured we’ll get it taken care of straight away! To avoid scratching furniture, assemble on a clean, soft surface like a blanket, carpet, or the attened cardboard box the furniture was shipped in. Start all bolts by hand to ensure proper alignment and to prevent cross threading. Then using the provided tool, tighten until you feel resistance. Do not overtighten. Bolts should not be forced, but some components, particularly blocks, t snug but can still be installed without tools or excess force. If parts are still not going together, please send us a photo of the part you are having trouble with.
ASSEMBLY INSTRUCTIONS & PRODUCT INFO:
RECYCLE THE PACKAGING
We’ve gone through great lengths to make as much of our packaging as possible recyclable. The cardboard box, paper wrap, ller and paper bags can all go in your recycling bin. The muslin hardware bags replaced plastic bags with the intention of reducing plastic and encouraging reuse. Loll Designs and Planet Earth thank you!
WE WANT YOU TO LOVE YOUR LOLL For more info and visual aids, watch the assembly videos at www.lolldesigns.com/videos For product care & maintenance, visit www.lolldesigns.com/care-maintenance For further lollygagging assistance, please reach out! [phone] [email protected] 5912 Waseca Street Duluth, Minnesota 55807
BLOCK & BOLT INSTALLATION Insert bolts through countersunk hole side of blocks as shown below.
CORRECT INCORRECT
Countersunk
Hole
“Loll Designs inspires people to appreciate the outdoors.”
Greg Benson - Founder
INCLUDED PARTS
1x
5/32˝
*Bolt shown in actual size.
22x
1˝
P1 (X2)
G Blocks (X22)
1" Bolts (X22)
P3 (X2)
P2 (X2)
P4 (X2) P5 (X2)
Double Micro (X2)
1/2" Button head (X4)
P1 (X2)
G Blocks (X22)
1" Bolts (X22)
P3 (X2)
P2 (X2)
P4 (X2) P5 (X2)
Double Micro (X2)
1/2" Button head (X4)
P1 (X2)
G Blocks (X22)
1" Bolts (X22)
P3 (X2)
P2 (X2)
P4 (X2) P5 (X2)
Double Micro (X2)
1/2" Button head (X4)
2x
P1
2x
P2
2x
P3
P1 (X2)
G Blocks (X22)
1" Bolts (X22)
P3 (X2)
P2 (X2)
P4 (X2) P5 (X2)
Double Micro (X2)
1/2" Button head (X4)
P1 (X2)
G Blocks (X22)
1" Bolts (X22)
P3 (X2)
P2 (X2)
P4 (X2) P5 (X2)
Double Micro (X2)
1/2" Button head (X4)
2x
P4
2x
P5
P1 (X2)
G Blocks (X22)
1" Bolts (X22)
P3 (X2)
P2 (X2)
P4 (X2) P5 (X2)
Double Micro (X2)
1/2" Button head (X4)
P1 (X2)
G Blocks (X22)
1" Bolts (X22)
P3 (X2)
P2 (X2)
P4 (X2) P5 (X2)
Double Micro (X2)
1/2" Button head (X4)
22x
GB
2x
DMB
4x
1/2˝
BOLINAS SURFBOARD
COFFEE TABLE

1
2
3
4x
1˝
10x
1˝
2xP2
2xP5
4xGB
2xP4
2xP3
10xGB

Step 5
Step 6 and repeat on other leg
Step 7 and repeat on other leg
Step 5
Step 6 and repeat on other leg
Step 7 and repeat on other leg
4
5
6
Step 5
Step 6 and repeat on other leg
Step 7 and repeat on other leg
2x
1˝
Step 5
Step 6 and repeat on other leg
Step 7 and repeat on other leg
Repeat step 6 on other leg.
2xDMB
4x
1/2˝
2xP1
2xGB

Step 5
Step 6 and repeat on other leg
Step 7 and repeat on other leg
Step 5
Step 6 and repeat on other leg
Step 7 and repeat on other leg
7
2x
1˝
Repeat step 7 on other leg.
2xGB