Lord MicroStrain G-Link2-LXRS User manual

G-Link2™-LXRS®Wireless Accelerometer Node
WHAT YOU NEED
1
INSTALL SOFTWARE AND CONFIGURE NODE
3a
Right-click
Node
Commander
Double-click Node Com-
mander icon on the Desktop
Insure that battery polarity
matches battery holder
P/N 6307-1040
WSDA-BASE-104 & USB Cable
Right-click
ASSEMBLE NODE BATTERY/ACCELEROMETER
2a
ASSEMBLE BASE STATION
2b
Follow on-screen installa-
tion instructions to install
Node Commander software
Quick Start
P/N 6305-5000
G-Link2™-LXRS®
with external accelerometer
P/N 6305-5002 or P/N 6305-5010
External Accelerometer P/N 9021-0034 3.6 Volt Lithium AA Battery P/N 9022-0052 External Power Cable
Remove 4 cover screws
Insert battery in battery
holder
Torx T9
screwdriver
Connect external accelerometer
to G-Link2™-LXRS®connector
P/N 6305-4002 or P/N 6305-4010
G-Link2™-LXRS®
with internal accelerometers

QUICK START G-Link2™-LXRS®Wireless Accelerometer Node
LORD MicroStrain®
459 Hurricane Lane
Suite 102
Williston, VT 05495 USA
Phone: [phone]
Fax: [phone]
8501-0046 rev 001
G-Link2™-LXRS®Wireless Accelerometer Node
Go to http://www.microstrain.com/wireless/g-link2 for more information.
CONFIGURE NODE
3b
Right-click
ACQUIRE DATA
4b
1. Note data file location
2. Limit file size here - note
free space available above
3. Click “Apply Network Configura-
tion”; Click “Start Sampling”
ACQUIRE DATA
4a
1. Select channels 2. Click buttons to
configure channels
1. Set sample
2. Set number of Sweeps - note
Time Duration and ensure Per-
cent of Total Bandwidth < 100%
Toggle between
Graph and Data Adjust X-Axis width
to zoom in on data
Note file name
and location
Status
Click red x to stop acquiring
VIEW STORED DATA
5
CONTACT LORD MICROSTRAIN®