Lorex SWEET PEEP MINI User manual

www.lorexbaby.com
ENGLISH FRANÇAIS ESPAÑOL
SWEET PEEPMINI
VIDEO BABY MONITOR
Version 1.0
USER’S GUIDE

Safety Precautions
• Adult assembly is required. Keep small parts away
from children when assembling.
• This product is not a toy. Do not allow children or
infants to play with it.
• This video monitor is not a substitute for responsible
adult supervision.
• Test the video monitor before use. Become familiar with
its functions.
• Keep the cords out of reach from children and infants.
• Never use extension cords with power adapters.
• Only use the chargers and power adapters provided.
Do not use other chargers or power adapters as this
may damage the device and battery pack.
• Only insert batteries/battery pack of the same type.
• Insert batteries with the correct polarity.
• Do not mix new and used batteries.
• Do not mix alkaline, standard, and rechargeable
batteries.
• Remove exhausted batteries from the product.
• Keep all batteries away from children and infants.
• Dispose or recycle batteries in accordance with local
laws, which may vary by location.
• Do not cover the video monitor with a towel or blanket.
• Do not use the video monitor near water.
• Do not install the video monitor near a heat source.
• Do not touch the plug contacts with sharp or metal
objects.
• Keep this user’s guide for future reference.
To Avoid Injury to
Children & Infants:
• MAKE SURE to keep the camera and all power
cords are least 3ft / 1m away from cribs and out of
reach of your child.
• Use the included cable clips to help keep power
cords away from your child.
3ft / 1m

Product Includes..............................2
Monitor Overview...........................2
Camera Overview...........................3
Getting Started ...............................4
Optional - Wall Mounting the Camera .......7
Using Your Baby Monitor ................8
Using the Menu....................................... 8
Talking to Your Baby................................9
Adjusting Volume .................................... 9
Adjusting Screen Brightness......................9
Turning on the Night-Light....................... 10
Changing Channels...............................10
Video Off Mode (Audio Only Mode) .......11
Enabling VOX Mode (Voice Trigger)........12
Pairing Additional Cameras ..........13
Disabling Channels ...............................15
Technical Specifications .................16
Camera ...............................................16
Monitor................................................ 16
Troubleshooting ............................17
Need Help?...................................17
ENGLISH
1
Table of Contents:

2
Product Includes
x1*
x1
Camera
Monitor
Power Adapter
x2*
x2*
*Contents may vary by model
x1*
Screws & Anchors
Power Adapter
x1
Monitor Overview
Cable Clips
x2*
Antenna
Sound LEDs
Power LED
Power on/off
Video on/off + VOX
Speaker
ESC / night light
Display
Talk
Link LED
Volume up/down
Menu
x1
Battery

ENGLISH
3
Camera Overview
Power port
On/off
switch
Belt clip
stand
Battery
compartment
Power port
Night-light
Lens
Microphone
Antenna
Nighttime LED’s
Mounting stand
Power LED
Pairing
button
Light sensor
Speaker

Make sure all power cables are at
least 3ft / 1m away from the crib and
out of reach of your child.
Use the included cable clips to help
keep power cords away from your
child.
4
Getting Started
1
2
Connect the power adapter to the
camera.
Slide the power switch to ON.
Power switch
3Press down on the battery compartment
door and slide it off the monitor.

The battery cable only connects one
way. Do not force the battery cable.
7Press and hold the power button to turn on
the monitor.
6Connect the power adapter to the monitor.
Power button
ENGLISH
5
4Connect the battery cable to the monitor.
Battery cable
5Replace the battery compartment door.
Battery
terminals

Pull up to extend
antenna
•It is recommended to charge the battery for
6 hours before first use.
•For overnight monitoring, it is recommended to
connect the power adapter. When fully charged,
the monitor will stay on up to 4 hours in normal
mode or 7 hours on Video OFF mode
(see page 11).
•For better reception, pull up the antenna on the
monitor.
Tips
6

Make sure all power cables are at
least 3ft / 1m away from the crib
and out of reach of your child.
Use the included cable clips to help
keep power cords away from your
child.
Mounting points
48mm
48mm
Cable Clips
ENGLISH
7
Optional - Wall Mounting the
Camera
Tap anchors into holes with a hammer. Insert
screws 2/3 of the way.
Before permanently mounting the camera:
•Determine where you will get the best view of
your baby.
•Ensure the power cable is long enough to power
the camera.
1Drill 2 holes in the wall with centers exactly
48mm apart.
2
3Align the mounting points with the screws
and push the camera down.

1
Press to open menu
2
Press to open sub-
menus and confirm
menu options
Press up/down to
select sub-menus and
options
3Press to go back/exit menu.
8
Using Your Baby Monitor
The monitor shows the following icons during use:
Icon Meaning
Signal strength
Selected
channel
Battery full*
Battery low
Camera out of
range or off
Icon Meaning
Talk activated
Sequence
mode activated
Night-light
activated
Night vision
activated
VOX mode
activated
Using the Menu
*When battery is charging, icon will fill up.