LW2401 Series QSG_EN_R1 Page 1
FOR MORE INFORMATION:
www.lorextechnology.com
LOREX
1 x Rechargeable Video Monitor
1 x Monitor Charging Cradle
1 x Wireless Camera(s)*
1 x microSD card
1 x Power Adaptor (for receiver)
1 x Power Adaptor (for camera)*
3 x Cable Clips*
Driver CD
Instruction Manual
Quick Start Guide
The Lorex Live Wireless Video Home Monitor comes with
the following components:
*Number of cameras and power adaptors may vary by model. Check
your package for specific content information.
A. Camera Setup
B. Video Monitor Setup
Slide the power switch up, to the
ON position.
1
Connect the power adapter to a
power outlet.
3
4
OPTIONAL
The camera features mounting holes on the bottom
of the base and can be mounted to a wall if
desired.
Determine the camera position that will give you
the best view before permanently wall mounting the
camera. Ensure the power cable is long enough to
power the camera.
Please refer to the Owner’s Manual for a mounting
template and full instructions on how to wall-mount
your camera.
The Camera can be placed on a flat
surface, or wall mounted.
Determine where you want to locate the
camera.
Desk/Counter Mount Wall Mount
Connect the Power Adaptor to
the 5V Input on the back of the
camera.
2
OPTIONAL: You can use ‘AA’
batteries or a rechargable battery
pack to power the camera. Please
refer to Appendix A in the Owner’s
Manual for instructions.
NOTE: Battery operation is suggested
for temporary monitoring only.
NOTE: Keep cables and wires at least
3 feet (1 meter) away from infants or
young children. Use the included cable
clips as necessary.
NOTE: AVOID INSTALLING IN A LOCATION WHICH REQUIRES THE WIRELESS
SIGNAL TO PASS THROUGH CEMENT, CONCRETE AND METAL STRUCTURES.
THIS WILL REDUCE THE TRANSMISSION RANGE.
LIVE Wireless Video Home Monitor
LOREX
LW241/LW2401 Series Quick Start Guide
Getting Started
3Slide the power switch up to the
ON position. The video monitor
will automatically scan for
cameras in range.
2Connect the power adapter to a
power outlet, and to the video
monitor or charging cradle. If
you use the cradle, ensure the
video monitor firmly rests on
the cradle. The video monitor’s
charging LED indicator glows
red to indicate charging is in
progress.
NOTE: It takes 6 hours to fully charge
the video monitor.
1Insert the included microSD card,
as indicated on the right side of
the video monitor.
