Lorex SWEET PEEP User manual

SWEET PEEP DUO
DUAL VIDEO BABY MONITOR
Version 1.0
USER’S GUIDE
www.lorexbaby.com
ENGLISH
FRANÇAIS
ESPAÑOL

Safety Precautions
• Adult assembly is required. Keep small parts away
from children when assembling.
• This product is not a toy. Do not allow children to play
with it.
• This video monitor is not a substitute for responsible
adult supervision.
• Keep the cords out of reach from children.
• Do not cover the video monitor with a towel or blanket.
• Never use extension cords with power adapters.
• Only use the power adapters provided.
• Test the video monitor before use. Become familiar with
its functions.
• Do not use the video monitor near water.
• Do not install the video monitor near a heat source.
• Only insert batteries/battery pack of the same type.
• Do not touch the plug contacts with sharp or metal
objects.
• Only use the chargers and power adapters provided.
Do not use other chargers or power adapters as this
may damage the device and battery pack.
• Dispose or recycle batteries in accordance with local
laws, which may vary by location.
• Insert batteries with the correct polarity.
• Do not mix new and used batteries.
• Do not mix alkaline, standard, and rechargeable
batteries.
• Remove exhausted batteries from the product.
• Keep all batteries away from children.
• Keep this user’s guide for future reference.
To Avoid Injury to
Children & Infants:
3ft / 1m
• MAKE SURE to keep the camera and all power
cords are least 3ft / 1m away from cribs and out of
reach of your child.*
• Use the included cable clips to help keep power
cords away from your child.
*This is important even if your child is not standing / mobile.

1
ENGLISH
Camera Overview...........................2
Monitor Overview...........................3
Getting Started ...............................3
Optional - Wall Mounting the Camera .......7
Using Your Baby Monitor ................8
Indicator LEDs .................................8
Using Two-way Talk........................9
Using the Menu.............................10
Adjusting Screen Brightness....................10
Adjusting Monitor Volume ......................11
Camera Selection.................................. 11
Changing Temperature Units...................12
Setting Temperature Alerts ......................12
Temperature Compensation ....................13
VOX Mode (Voice Trigger) ..................... 13
Adjusting Camera Volume ......................14
Playing Lullabies ...................................14
Using the Night-light.............................. 15
Color Settings .......................................16
Delete Camera...................................... 17
Invert Image ......................................... 17
Restore Default Settings..........................18
Pairing Additional Cameras ..........19
Technical Specifications .................21
Camera ...............................................21
Monitor................................................ 21
Troubleshooting ............................22
Need Help?...................................22
Table of Contents:
*This is important even if your child is not standing / mobile.

2
Contents
Camera
Power Adapter
Batteries
Monitors
Anchors
Power Adapters
Camera Overview
Antenna
Power Indicator
LED Power Port
Microphone
Screws
x1*
x2*
x2*
x1*
x2*
x2*
x2*
* Contents may vary by model
x2*
Cable Clip
6VDC 800mA
Lens
Power Button
Night-light
Light Sensor
Speaker
Temperature Sensor

3
ENGLISH
Monitor Overview
Getting Started
1
Sound
Indicator LEDs
Antenna
Power Button
Talk Button
Power Indicator LED
VOX Indicator LED
Speaker
LCD Touchscreen
6VDC
800mA
Battery
Compartment
Belt Clip / Stand
Microphone
Power Port
Menu Button
Connect one of the included power
adapters from the camera to a power
outlet.
Make sure all power cables are at least
3ft / 1m away from the crib and out of
reach of your child.
Use the included cable clips to help keep
power cables away from your child.
See “Wall Mounting the Camera” on page
7 for details on installing cable clips.

4
3
2
Insert the battery so the positive and
negative signs on the battery line up with
the contacts in the battery compartment as
shown below.
Press the power button to turn on the camera.
4
Push down on the battery compartment
door and slide it off the monitor(s).

5
ENGLISH
5
Press the power button to turn on the monitor(s).
Press the power button to turn on the camera.
6
Connect the remaining power adapters from the
monitor(s) to a power outlet.
The power indicator LED on the monitor is
red while charging, and turns green when
completely charged.
Let the monitor(s) charge for at least 4 hours to
charge the batteries. When fully charged, the
monitor(s) can be used cordlessly for up to 3.5
hours.
NOTE: The monitor(s) and the camera should be
plugged in for overnight / prolonged monitoring.
7

6
• If you do not plan to use the unit for a prolonged
period of time, remove the batteries from the
monitor(s).
• For prolonged / overnight monitoring, it is
recommended to connect the monitor(s) to a
power outlet. Battery-powered use is supported
for convenient, short-term portable usage only.
• When fully charged, the monitor(s) will stay on
up to 3.5 hours in normal viewing mode, and up
to 7 hours in VOX mode (see “VOX Mode (Voice
Trigger)” on page 13).
Tips

7
ENGLISH
Optional - Wall Mounting the Camera
Tap anchors into holes with a hammer. Insert
screws 2/3 of the way.
Before mounting the camera:
• Determine where you will get the best view of your child.
• Ensure the power cable is long enough to power the
camera.
1Drill two holes 44mm from one another.
2
3Align the mounting points on the bottom of
the camera with the screws and push the
camera down.
Make sure all power cables are at least
3ft / 1m away from the crib and out of
reach of your child.
Use the included cable clip to help keep
power cables away from your child.
Cable clip should be used even if you
are not mounting the camera.
To mount the camera:
To install the cable clips:
Place the camera in the desired position.
Feed the power cable through the two plastic
brackets on each cable clip. Wrap the cable
around the brackets to shorten the cable.
1
2
3
Position the cable clips against a wall or floor.
Mark your chosen position and remove the
power cable from the two brackets.
Remove adhesive guard when you are
prepared to attach the clips.
4Once the cable clips have been attached, feed
the power cable through the two brackets and
wrap excess cable around the brackets.
44mm
Mounting
points

8
Using Your Baby Monitor
The monitor shows the following icons during use:
2 7
1
2 7
1
1 2 3 4
1
2
3
4
Camera number indicator
Room temperature at camera’s location
Signal strength indicator
Battery charge indicator
Indicator LEDs
Sound Indicator LEDs
Indicate the volume of sounds
heard on the monitors.
5
6
7
5
6
7
Power Indicator LED
Indicates the monitor is turned on.
VOX Indicator LED
Indicates VOX mode is turned on.
See “VOX Mode (Voice Trigger)”
on page 13.
High
Low