Lorex LHV2000FS Series Instruction Manual

Information in this document is subject to change without notice. As our products are subject
to continuous improvement, Lorex Corporation and our subsidiaries reserve the right to modify
product design, specifications and prices, without notice and without incurring any obligation.
E&OE © 2017 Lorex Corporation. All rights reserved.
Package Contents: Connecting Your System
MPX HD Digital Video Surveillance Recorder
LHV2000FS Series
Quick Connection Guide
2Monitor/TV* MouseRouter*Cameras** Power 1
LHV2000FS_SERIES_QCG_EN_R2
3 4 5
Firmware Update
This system features automatic firmware upgrades
for enhanced functionality. It is required to upgrade
your system to the latest firmware version.
If a firmware upgrade is available:
1. After startup, a notification will appear
asking you to upgrade the firmware. Click OK to
upgrade.
2. The system will download and install the firmware
upgrade. Wait for the firmware update to complete.
The system may restart during the firmware upgrade
process.
DO NOT power off or disconnect the power cable
during firmware installation.
* Not included / sold separately.
** Cameras are included only with bundled systems. Stand-alone systems do not include cameras.
8 channel configuration shown. 4/16 channel units will have the respective number of video inputs.
For camera compatibility information, visit lorextechnology.com/compatibility
MPX DVR
Quick Start Guides
USB Mouse
Power Adapter
Remote Control
Ethernet Cable HDMI Cable
Need Help?
Visit us online for up-to-date software and
complete instruction manuals
Click on the Downloads tab
4
Visit lorextechnology.com
Search for the model number
of your product
Click on your product in the
search results
3
2
1
30 Minutes
Extension Cable*
The extension cable must
be a single stretch of cable
between the DVR and camera.
You cannot connect multiple
extension cables to each other.
OR
For the best video output this
DVR can provide, you must
use it with a
monitor/TV that supports
1080p resolution (or above).
!
HDMI VGA*
6: ON
Beeping
If the system is beeping after startup, the Ethernet
cable may not be connected or the system may not be
connected to the network.
To stop the beeping:
1. Connect an Ethernet cable from the system to your
router. OR
2. Right click and click Disable Beep.

1. LEFT-CLICK:
• During split-screen display mode: Click an
individual channel to view it in full-screen.
Click again to return to the split-screen
display mode.
• While navigating menus: Click to open
a menu option.
2. RIGHT-CLICK:
• During live view: Right-click anywhere
on the screen to open the Quick Menu.
• Within system menus: Right-click to exit
menus.
Using the Mouse
1 2
Search and Playback
1. From live view, right-click and then click Search.
2. Log in using the system user name (default: admin)
and password (default: 000000).
3. Use the calendar on the right to select the date to
playback.
4. Use the drop-down menus to select the channels you
would like to playback. Click the display options
( ) to playback multiple channels
simultaneously.
5. Click inside the video bar to select the playback time.
Playback starts immediately at the selected time.
Setting the Date and Time
1. In live view, right-click and click Main Menu.
2. Log in using the system user name (default: admin) and
password (default: 000000).
3.
Using the Quick Menu
Right-click to open the Quick Menu.
NOTE: In live view, hover the mouse cursor over the top of the
screen to open the Navigation Bar. Move the mouse cursor away
from the top of the screen to close the Navigation Bar.
Quick Access to System Information
To quickly open a window that displays vital system information
such as device ID, firmware version, and IP address:
• Press the ENTER button on the front panel.
Quick Connection Guide
Search and playback recordings
Start/stop sequence mode
Adjust camera color settings
Disable current audible warning
Control PTZ cameras (not included)
Select camera/live display view
View system information
4. Click General and select the Date&Time tab.
5. Click Apply to save changes.
MPX HD Digital Video Surveillance Recorder
LHV2000FS Series
• Right-click to open the Quick Menu and click Info. If
prompted, enter the system user name (default: admin)
and password (default: 000000).
30 Minutes
Open manual recording controls
Open Main Menu
LHV2000FS_SERIES_QCG_EN_R2
Click and select Setting
NOTE: It is important to set the correct time to ensure
accurate time stamps on video recordings.
Enter the current time
and select your time
zone, and click OK
Check DST to enable
auto Daylight Savings
Time updates
(Optional) Check NTP to
sync your system with
an Internet time server.
Click Manual Update
to instantly update the
time
NOTE: A constant
Internet connection is
required to use NTP
Click inside the bar to select a
playback time.
Select the day
to playback
Select
channels to
playback
OR