Lorex SG4230 User manual

2.4 GHz Black & White Video Security System with 1 Camera
QUICK SET UP GUIDE
1. Unpack the system contents from the gift box
(a) Mount the camera to a wall or desktop using the supplied
mounting bracket, screws and anchors
(b) Connect power to the camera using the 9V DC 500mA
adapter (or use the optional 4 “AA” batteries*, not included)
(c) Turn the camera “ON”
*Note: The battery power will last 7-8 hours. This option is
only intended for use in the event of a power failure.
3. Set up the monitor
4. Adjust for Optimum Clarity
Camera
Mounting
Bracket Screws & Anchors
9V DC Power Adapter
(for camera) Monitor
(a) Place the monitor in the desired viewing location
(b) Connect power to the monitor using the 13.8V DC 1000mA
adapter
(c) Turn the monitor “ON” (the Power switch is located on the
right side of monitor)
Now that both the camera and monitor are powered and
turned “ON”, you should be seeing the image from the
camera.
Adjust the antenna to ensure clear picture reception. If
there’s still interference, then change the channel on both
the camera and monitor between 1-4. The camera and
monitor must be set to the same channel.
2. Connect the Wireless Video Camera
FOR MORE INFORMATION
www.strategicvista.com
Antenna
RCA Cable
13.8V DC Power Adapter
(for monitor)