LOTOO PAW Gold Touch User manual

Manual of “User defined PMEQ” and “My Scheme”
For Lotoo PAW Gold Touch and PAW 6000 only
Create a new user defined PMEQ:
PMEQ is short for “Parametric Equalizer”; It provides more precision and has
a greater number of adjustable parameters compared to the more simplified
equalizers included in other audio players. PMEQ allows users to make multi-
ple adjustments across the frequency spectrum.
1. In Settings ,set Hardware decode to Auto
2.
1. In Settings ,set Hardware decode to Auto .
2. In Settings > EQ Settings > PMEQ ,the grey lines indicate preset PMEQs
which can not be modified, while the white lines are user-defined ones,
which are able to be modified. Click on the line to enter the PMEQ editor.
4. Adjust the PMEQ parameters to suit your requirements.
6. In the playing screen,you’ll find the new PMEQ in the lower right EFX menu.
5. Tap on the icon in the upper left corner < ,and choose Yes to save.
Provide a name for your new PMEQ setting and choose OK to enter the
PMEQ editor.
3.
In Settings > EQ Settings > PMEQ ,choose the icon in the upper right
corner ,then choose the add icon in the bottom menu.
Modify an existing user defined PMEQ:
All manuals and user guides at all-guides.com
all-guides.com

About Hardware decode
When Hardware decode is set to On ,the Player will decode all DSD
files natively,using the built-in hardware. In this case,the PMEQ/ATE will
not take effect with DSD files,even if selected,and the ATE/PMEQ icon
on the top status bar will be coloured grey (when playing DSD files only).
A.
1.
2. Select the PMEQs needed,then tap on the OK icon in the upper right corner.
In Settings > EQ Settings > My Scheme , tap on the icon in the upper
right corner ,then choose add scheme at the bottom
3. Create a name for the scheme
When Hardware decode is set to Auto ,the Player will decode DSD files
depending on the EFX: if ATE/PMEQ are not activated, the hardware
decode will be applied; otherwise software decoding will be applied.
B.
“My Scheme“ is for managing a large number of PMEQs efficiently. It allows
users to choose a selection from all of the saved PMEQs and define them
as one “scheme”, making sorting more efficiently.
Re-edit the PMEQ parameters to suit your requirements.3.
Tap on the icon in the upper left corner < ; 3 options will become avail-
able:
Save Save the modifications you have made to the current PMEQ
Save as Save the modifications you have made to the PMEQ with a new
name
Give up Cancel the editing operation
4.
Create a new scheme:
All manuals and user guides at all-guides.com

5.
1. In Settings > EQ Settings > My Scheme ,tap on the icon in the upper right
corner to manage your schemes.
2. Schemes can be batch deleted by selecting them and then tapping the
bottom right icon Delete
3. An individual scheme can be modified by clicking the icon, located on
the right side of each scheme name.
In the playing screen, you’ll find only the scheme PMEQs are shown in the
EFX menu.
4. Go back to My Scheme ,and select the scheme that you just created,in
order to load and run it.
Modify an existing scheme:
All manuals and user guides at all-guides.com