Lovencare Adiva User manual

Instructions for Adiva Stroller
BP 9754
[email protected]
www.lovencare.com.au

Maximum weight capacity of the Adiva Stroller should not exceed 22Kg
This stroller complies with AS/NZS 2088:2000
Safety guidelines and instructions must always be followed before making use of this
product, please retain these instructions for future reference.

To open the Stroller:
- Expand the frame of the pram, until you hear it click into
place. Before attaching the seat you should insert the wheels.
Inserting the Wheels:
- Insert the back wheels by simply pushing them
up in the housing until they click in. Test the
wheelby trying to pull on them to see if they fall off.
- Insert the front wheel by inserting them into the front
housing by pushing up on the black button until you hear it
click into place. Test the wheel to make sure you have
inserted them properly.
- to lock the back wheels, simply push down in the centre of
the back footrest, push up to release the brake.
- to fix the front wheels, make sure the wheels are facing the
rear, and push down on the front foot brake. Lift the brake up
to swivel the wheels.
A
ttaching the Basket/Seat:
- to insert the carry cot, simply place in the middle
of the frame, the seat will click into place when
pushed in on centre rail.(the seat can be placed in
2 directions , front facing and reverse facing)
- to remove, simply push in on each side and pull
up to completely remove.
- to change the seating to a carry cot, you must
remove the seat, turn over at the bottom near the
footrest and you will find 2 harness buckles click
these into each other.
- Now insert the carry cot back into the frame.
Bassinet Mode:
- when using the bassinet, make sure the backrest and footrest are fully reclined flat, and the
crutch strap is removed from around the front bar.
- an optional mattress is provided for use with the bassinet mode.
A
ttaching the Hood:
- attach the hood by clipping into the housing
located on the frame.
- to remove the hood push down on the black clip
located on either side and pull out.
A
ttaching the front Bumper Bar:
- insert the bumper bar into the fram of the seat
and click into place
- to remove the bar, push on either side the
small oval shaped button and lift out.
- ensure crutch strap is attached in seated
Position (remove in bassinet mode)

To Adjust the Backrest:
- when in the seated press the oval middle button and
recline to you desired position.
To Adjust the harness:
- This stroller has been designed with a 5 point harness for
the safety of your child. Your child must always be secured
in this harness whilst in use.
- the safety harness is adjustab, and to release the harness
you should press the buckle at either side to remove it.
- to secure the harness push the buckles in, you will hear a
click which means the harness has been secured.
To attach the bootcover:
- the boot cover will fit over the front of the stroller and is
secured by matching up the studs and velcro straps.
To adjust the handle Bar:
- push in both the oval shaped buttons to adjust the handle
bar to the desired height.
To close the stroller:
- firstly remove the seat by pushing down on the clips and
pulling up to lift it out.
- on the handle bar push the 2 side latches up and push
the pram down to the ground.
To attach tether strap:
- wrap around handle bar as shown in image.

WARNING:
•Do not carry extra children or bags on this stroller.
•Never leave your child unattended in the stroller.
•Care should be taken if the stroller is to be used on stairs or escalators.
•Follow the manufacturers’ instructions.
•To avoid serious injury always use the harness provided to secure the child.
•Put on all the brakes whenever you park the stroller.
•Care should be taken whilst folding and unfolding stroller to prevent fingers being
trapped.
•Ensure your child’s fingers, hands and all other body parts are clear from any moving
part when adjusting the seat or handle on your stroller.
•Basket maximum weight should not exceed 5kg.
•Do not leave children unattended.
•Make sure children are clear of any moving parts if you adjust the stroller, otherwise
they may be injured.
•This stroller should not be used near an open fire or an exposed flame.
•Do not use accessories other than those supplied or approved by Love N Care.
CARE AND MAINTENANCE:
It is recommended to regularly inspect and maintain your stroller to ensure freedom of
movement of locking devices; and security of essential components.
To maintain the stroller follow the steps mentioned below:
•If wheels become stiff, spray with dry silicon lubricant
•The frame can be washed with soap and warm water, do not use bleach.
•The seat can be wiped down with a dry cloth using soapy warm water.
•The padded stroller liner should be hand washed and hung to dry but not directly
under sunlight.
RECOMMENDATIONS:
Some strollers have backrests adjustable between the upright and reclined position. The
upright position is not advisable for children less than 6 months. We recommend using the
lowest recline position to transport the child. The backrest can be adjusted to a more upright
position as the child grows older and is able to support its head without assistance.
CHECKLIST:
The following items should be found with Box:
5Frame 5Hood with sun visor at front and storage pocket in
5Seat/Bassinet rear.
5Boot Cover 5Front bar
5Bassinet foam mattress 5Basket

Contact Us:
Love N Care Pty Ltd.
297-299 Canterbury Rd, Revesby 2212
Phone: [phone] Fax: [phone]
Email: [email protected]