Lovencare Conquest User manual

Instruction Manual
BP 9130
PLEASE KEEP INSTRUCTIONS FOR FUTURE REFERENCE
conquest

Congratulations on Purchasing
your new Love N Care Stroller
Within no time you should be able
to have this stroller ready to
meet your beautiful child :)
conquest

FOLLOW THE MANUFACTURER’S INSTRUCTIONS.
PUT ON ALL THE BRAKES WHENEVER YOU PARK THE STROLLER.
ALWAYS APPLY THE BRAKES WHENEVER THE STROLLER IS STATIONARY.
DO NOT LEAVE CHILDREN UNATTENDED.
SECURE THE CHILD IN THE HARNESS ATALL TIMES.
DO NOT CARRY EXTRACHILDREN OR BAGS ON THIS STROLLER.
DO NOT USE THIS SEAT WITH ANY OTHER MODELS OF STROLLER.
MAKE SURE CHILDREN ARE CLEAR OF ANY MOVING PARTS IF YOU ADJUST THE
STROLLER, OTHERWISE THEY MAY BE INJURED.
CHECK THAT ALL SAFETY LOCKS ARE ENGAGED BEFORE PLACING A CHILD IN THE
STROLLER.
USE THE HARNESS ATALL TIMES.
WHEN NOT IN USE DISCONNECT SHOULDER STRAPS FROM THE WAIST STRAP
AND/OR BUCKLE TO PREVENT STRANGULATION.
THE HARNESS CAN FORM LOOPS WHICH MAY BE A STRANGULATION HAZARD.
NEVER LEAVE A HARNESS CONNECTED WHEN NOT FITTED TO A CHILD IN THE
STROLLER.
TO AVOID SERIOUS INJURY ALWAYS USE THE HARNESS PROVIDED TO SECURE THE
CHILD. (ADJUST THE STRAPS TO SUIT THE SIZE OF YOUR CHILDS BODY)
IT IS UNSAFE TO USE ACCESSORIES OTHER THAN THOSE SUPPLIED BY LOVE N CARE.
CARE SHOULD BE TAKEN IF THE STROLLER IS TO BE USED ON STAIRS OR ESCALATORS.
THIS STROLLER SHOULD NOT BE USED NEAR AN OPEN FIRE OR AN EXPOSED FLAME.
CARE SHOULD BE TAKEN WHILST FOLDING AND UNFOLDING THE STROLLER TO
PREVENT FINGERS BEING TRAPPED.
ENSURE YOUR CHILDS FINGERS, HANDS AND ALL OTHER BODY PARTS ARE CLEAR
FROM ANY MOVING PARTS WHEN ADJUSTING THE SEAT OR HANDLE ON YOUR
STROLLER.
THE BASKET CAN NOT BE REMOVED.
USE THE TETHER STRAP TO PREVENT THE STROLLER FROM ROLLING AWAY.
DO NOT RUN WHILE USING THIS STROLLER.
THE UPRIGHT POSITIONS ARE NOT SUITABLE FOR USE WHEN CHILD IS LESS THAN 6 MONTHS
OLD. THE LOWEST RECLINE POSITION SHOULD BE USED FOR NEWBORNS.
MAXIMUM WEIGHT OF CHILD SHOULD NOT EXCEED: 17KG
MAXIMUM WEIGHT FOR BASKET: 4KGS
MAXIMUM WEIGHT FOR CANOPY POCKET: 1KG
WARNINGS
SAFETY GUIDELINES AND INSTRUCTIONS MUST ALWAYS BE FOLLOWED BEFORE
MAKING USE OF THIS PRODUCT. PLEASE RETAIN THESE INSTRUCTIONS FOR
FUTURE REFERENCE.READ ALL INSTRUCTIONS CAREFULLY BEFORE ASSEMBLY AND
USE OF THIS STROLLER.
THIS PRODUCT COMPLIES WITH PRODUCT SAFETY STANDARD AS/NZS 2088:2009
*PICTURES USED IN THIS MANUAL ARE FOR ILLUSTRATIVE PURPOSES ONLY. THE ACTUAL
STROLLER MAY VARY IN DISPLAY.
conquest
TO AVOID INJURY OR DEATH

CARE AND MAINTENANCE
FABRIC CARE
- HAND WASH ONLY
- DO NOT BLEACH
- DO NOT TUMBLE DRY
- DO NOT IRON
- DO NOT WRING
- DO NOT DRY CLEAN
conquest
All Love N Care products have one year warranty from the date of purchase.
It is recommended to regularly inspect and maintain movement of locking
devices and security of essential components.
To prolong the life of your stroller keep it clean and do not leave it in direct
sunlight or in the boot of your car for extended periods of time.
Regularly check all parts for wear and tear. Lubricate if tight.
Removable fabric covers and trims may be cleaned using warm water with
a household soap or mild detergent. Allow it to dry completely before re-use.
Non-removable fabrics and trims may be spot cleaned using a damp sponge
with soap or mild detergent. Allow it to dry completely before folding or
storing away.
Never clean with abrasive, ammonia based bleach based or spirit type
cleaners.
If the wheels become damaged or worn discontinue use and replace.

WARRANTY AGAINST DEFECTS
ALL LOVE N CARE PRODUCTS ARE GUARANTEED FOR TWELVE MONTHS FROM THE
DATE OF PURCHASE.
OUR GOODS COME WITH GUARANTEES THAT CANNOT BE EXCLUDED UNDER THE
AUSTRALIAN CONSUMER LAW. YOU ARE ENTITLED TO A REPLACEMENT OR REFUND FOR
A MAJOR FAILURE AND FOR COMPENSATION FOR ANY OTHER REASONABLY FORSEEABLE
LOSS OR DAMAGE. YOU ARE ALSO ENTITLED TO HAVE THE GOODS REPAIRED OR REPLACED
IF THE GOODS FAIL TO BE OF ACCEPTABLE QUALITY AND THE FAILURE DOES NOT AMOUNT
TO A MAJOR FAILURE.
THIS COVERS AGAINST FAULTS WHICH DEVELOP THROUGH FAULTY MATERIALS AND
WORKMANSHIP. MISUSE, ACCIDENTAL DAMAGES, NORMAL WEAR AND TEAR OR NEGLECT
ARE NOT COVERED.
IF A FAULT BECOMES APPARENT, PLEASE RETURN THE ITEM TO THE STORE OF PURCHASE
WITH YOUR RECEIPT. YOU MUST INFORM THE STORE WHAT THE DEFECT IS. WE WILL THEN
ARRANGE FOR ITS REPAIR OR IT WILL BE ASSESSED FOR REPLACEMENT AS EXPEDIENTLY
AS POSSIBLE. THE BENEFITS OF THIS WARRANTY ARE IN ADDITION TO OTHER RIGHTS AND
REMEDIES UNDER THE LAW IN RELATION TO THE GOODS ABD SERVICES TO WHICH THIS
WARRANTY RELATES.
IF YOU ARE UNABLE TO RETURN THE ITEM TO THE STORE OF PURCHASE, YOU CAN
CONTACT LOVE N CARE ON FREECALL 1300732599. WE WILL THEN ORGANISE FOR EITHER
SOMEBODY TO INSPECT THE ITEM OR ARRANGE FOR A COURIER TO PICK IT UP AND
RETURN IT BACK TO YOU.
FOR MORE INFORMATION PLEASE CONTACT:
LOVE N CARE PTY LTD
EMAIL: [e-mail]
WEB: www.lovencare.com.au
PHONE: [phone]
FAX: [phone]

conquest
Spare Parts
1. 2.
3. 4.
1. 1 x Stroller Frame - Including, basket, seat and tether strap
2. 1 x Canopy
3. 2 x Front Wheels
4. 2 x Rear Wheels

Unclip the latch from the frame.(Located on
the rear leg)
conquest
Instructions- Unlocking frame and seat
Open the frame by pulling the frame
in both directions until you hear a click
which indicates the frame is fully
opened and locked.
Push down on the stroller handle to make sure that
the frame is locked.
CLICK

To assemble the front wheels, place
each front wheel and insert it into each
of the wheel mouldings.
Push the wheel and then press the
release button on the wheel mouldings
you should then hear a click. This should
that the wheels are locked in. Pull on
each wheel to ensure they are secured.
conquest
Instructions- Assemble/Use and remove
the front wheels
To remove the front wheels, press the
buttons located on the top of the wheels
mouldings then pull down on wheel to
remove it. Repeat for both sides.
CLICK
To use the swivel wheels, and lock the
front wheels push the swivel lock upwards.
To allow for the wheels to swivel push the
swivel lock downwards.
Always lock the swivel wheels when using
the stroller on rouch surfaces to minimise
movement.

To assemble the rear wheels, place
each front wheel and insert it into each
of the rear mouldings and push it in until
you hear it click. Pull on the wheel to
make sure it is placed correctly and
locked in. Repeat for the other side.
To remove the rear wheels, pull the
metal latch downward (located under
the rear wheel moulding) to release the
wheel. Pull the wheel from the frame.
conquest
Instructions- Assemble and remove the
rear wheels and use of brakes
To lock the rear wheels, press down on
rear right red brake pedal to lock the
brakes. Check that the brakes have
been engaged by pushing the stroller
forward.
CLICK
To release the brakes push the rear
brake pedal upwards.
WARNING
PUT ON ALL THE BRAKES WHENEVER YOU PARK
THE STROLLER. ALWAYS APPLY THE BRAKES
WHENEVER THE STROLLER IS STATIONARY.

To assemble the canopy,
insert the canopy
mouldings into the frame
mouldings.
conquest
Instructions- attaching the canopy
The Canopy Moulding
should click into the
the frame.
Attach the snap button
from the canopy to the
snaps located on the
handle o the stroller.
Wrap the excess strap over
the frame to the hook on
canopy where the loop
should be attached.
Attach the hook strip
located on the inner edge
of the canopy with the
loop located on the sides
of the stroller.
The Attached strips should
look like this.
The Attached strips should
look like this.
Attach the rectangle
hooks from the bottom of
the inner side of the
canopy with the loops on
the outer side of the stroller
seat.
The attached canopy
should look like this.

To adjust the canopy, you can open it
by pulling it forward.
conquest
Instructions- using the canopy
To close the canopy just push it
backwards.
To open the canopy window, lift the
canopy window backwards.
To place it back attach the loop onto
the hook from the flap.
For extra air circulation, the rear flap
from the canopy can be moved
upwards. Remove the loops from the
hooks (velcro straps). To re-attach
just place the hooks over the loops.

conquest
Instructions- Adjusting the backrest and
using the tether strap
A wrist tether strap is attached on the handle of the
stroller. Slide your hand through the tether strap loop
whenever you use the stroller. Only remove your hand
from the tether strap loop when the brakes have been
applied to the strollers wheels.
Main Adjuster
Moulding
Plastic Rings
Back rest
Adjuster
Button
To raise the backrest, hold the main
adjuster moulding in one hand then
grasp the plastic rings fixed to the
adjuster straps with the other hand.
Push up on the main adjuster
moulding at the same time pull the
Adjsuter strap to the desired position.
To lower the backrest, support the
backrest with one hand and with the
other hand pull down on the backrest
adjuster button and lower the backrest
to the desire position
WARNING
USE THIS STRAP TO STOP THE
STROLLER ROLLING AWAY

conquest
Instructions- Using the Harness
USE THIS HARNESS AT ALL TIMES
WARNING
Shoulder
straps
Crotch Strap
Waist Strap Waist Strap
Housing
Buckle
AA
BB
C
Carefully place your child into the seat. Position its legs between the crotch strap
Place the shoulder strap (A) over the childs shoulders and place the waist strap
(B) over its waist. Slide the shoulder strap buckle (A)along the rail on the top of
the waist Strap (B). Repeat for both sides.
A
Shoulder
strap
Waist Strap B
Shoulder
straps
AA
Waist Strap Waist Strap
BB
Crotch Strap Crotch Strap Crotch Strap
Housing
Buckle Housing
Buckle Housing
Buckle
Shoulder
straps
Shoulder
straps
Shoulder
strap
Waist Strap
Waist Strap Waist Strap
AAA
AA
B
BB B B
CC
C
Slider Slider
Slider
Slider
With the shoulder strap (A)and waist strap (B) now connected place them into
the housing Buckle (C) you should hear them click into place. Repeat for the
other otherside. To release the harness squeeze the centre of the housing
buckle. You can tighten or loosen the shoulder or waist straps by adjusting the
sliders. Pull upwards to tighten or downwards to loosen.

conquest
Instructions- Folding the stroller
To Fold the stroller, press the red safety
lock button on the side of the stroller,
With the other hand lift the folding strap
located on the seat unit. Lock the frame together with the
storage latch.

Head Office:
Love N Care Pty Ltd.
297-299 Canterbury Rd, Revesby
NSW 2212 Australia
Contact No: 02 9774 4655
Fax: [phone]
Email: [email protected]
Website: www.lovencare.com.au
Contact Us
Brisbane
7-9 Eileen Street
Underwood QLD 4119 Australia
Contact No: 07 3290 4217
Fax: [phone]
Western Australia
5 Modal Crescent
Canning Vale WA 6155 Australia
Contact No: 08 9455 4972
Fax: [phone]