Lovencare TRIXI User manual

INSTRUCTION MANUAL
PLEASE RETAIN FOR FUTURE REFERENCE BP 9773
TRIXI

Congratulations on your new quality Love N Care product from our exclusive range of baby products.
This exceptional design combines the most unique features that any baby product oers.
We are condent that you will appreciate its many highlights, including its reliability and durability.
Your new product has been manufactured to comply with the Highest Quality Standards and comes
with a 12-month warranty.
As you will soon learn there are many more great features about your new Love N Care product.

FOLLOW THE MANUFACTURER’S INSTRUCTIONS.
To avoid serious injury always use the harness provided to secure the child.
(Adjust the straps to suit the body size of your child)
THE MAXIMUM WEIGHT FOR THE STROLLER SEAT IS 15KG.
THE MAXIMUM WEIGHT FOR THE BOTTOM BASKET IS 5KG.
SUITABLE FROM NEWBORN TO 36 MONTHS
PUT ON ALL THE BRAKES WHENEVER YOU PARK THE STROLLER.
ALWAYS APPLY THE BRAKES WHENEVER THE STROLLER IS STATIONARY.
Safety guidelines and instructions must always be followed before making use of this product,
please retain these instructions for future reference.
This product complies with product standard AS/NZS 2088:2000
WARNING: TO AVOID INJURY OR DEATH:
DO NOT LEAVE CHILDREN UNATTENDED.
SECURE THE CHILD IN THE HARNESS AT ALL TIMES.
DO NOT CARRY EXTRA CHILDREN OR BAGS ON THIS STROLLER.
MAKE SURE CHILDREN ARE CLEAR OF ANY MOVING PARTS IF YOU ADJUST THE
STROLLER, OTHERWISE THEY MAY BE INJURED.
USE THE HARNESS AT ALL TIMES.
WHEN NOT IN USE DISCONNECT SHOULDER STRAPS FROM THE WAIST STRAP
AND/OR BUCKLE.
The harness can form loops which may be a strangulation hazard. Never leave a harness
connected when not fitted to a child in the stroller.
Care should be taken if the stroller is to be used on stairs or escalators.
Care should be taken whilst folding and unfolding stroller to prevent fingers being trapped.
Ensure your child’s fingers, hands and all other body parts are clear from any moving
part when adjusting the seat or handle on your stroller.
This stroller should not be used near an open fire or an exposed flame.
It is unsafe to use accessories other than those supplied or approved by Love N Care

11
10
12
14
13
NAME OF PARTS
1
2
3
4
5
6
7
8
9
1 Button
2 Folding latch
3 Handle
4 Shoulder protecter
5 Harness buckle
6 Mesh basket
7 Parking brake
8 Rear wheel
9 Front wheel
10 Canopy
11 Front bar
12 Seat
13 Foot Rest
14 Swivel lock
It is recommended to regularly inspect and maintain movement of locking devices,
and security of essential components.
To maintain the stroller follow the steps mentioned below:
If wheels become stiff, spray with dry silicon lubricant
The frame can be washed with soap and warm water, do not use bleach.
The seat can be wiped down with a dry cloth using soapy warm water.
The padded stroller liner should be hand washed and hung to dry but not directly
under sunlight.
All love n Care products have one year warranty from the date of purchase.
CARE AND MAINTENANCE

It is recommended to regularly inspect and maintain movement of locking devices,
and security of essential components.
To maintain the stroller follow the steps mentioned below:
•If wheels become stiff, spray with dry silicon lubricant
•The frame can be washed with soap and warm water, do not use bleach.
•The seat can be wiped down with a dry cloth using soapy warm water.
•The padded stroller liner should be hand washed and hung to dry but not directly
under sunlight.
All love n Care products have one year warranty from the date of purchase.
CARE AND MAINTENANCE
IMPORTED BY:
LOVE N CARE PTY LTD, 297-299 CANTERBURY RD
REVESBY NSW 2212 AUSTRALIA

ASSEMBLY INSTRUCTIONS
Unfold and Assemble
1. Unfold the frame - remove the locking latch. Grasp both handles and lift up quickly
to open frame and press down the handles until you hear clicks. Pull up the upper Lock
as shown in Fig. 1
Fig 1.
Latch Washer
Fig 2.
2. Assemble Front Wheels:
Insert the front wheel peg into the plastic base until you hear
a click.
To disassemble:
Press down the button on the plastic baseand pull the wheel
set out.
Latch
Fig 3.
3. Assemble Rear Wheels:
Insert the rear wheel pegs into plastic houses until you hear
a click.
To Disassemble:
Pull out the latch on the plastic housing and pull rear wheels out.
PUT ON ALL BRAKES WHEN YOU PARK THE VEHICLE.

ABC
Rivet head
Fig 4.
4. Assemble the Canopy:
Align the holes on the canopy fixture with the fixed rivets on the handle Press the fixture
onto the handles (PART A)
Close the elastic fastening in the rear part of the hood on the pram frame and repeat the
ame procedure on the other side (PART B and C)
A
Latch
B C
Fig 5.
5. Attach the Bumper Bar:
Slide the ends of the bumper bar over the mouldings on the side of your stroller. As
shown in part A. Keep sliding it down until the latch clicks into place on both sides.
Push Firmly upwards to ensure that it is attached securely.
To Remove the Bumper Bar:
Ease the latch away from the frame and slide the bumper up.

How to Use
1
2
Fig 6.
How to Use the Braking System:
At point 1 push down firmly on the red brake petal to engage the
brake.
At point 2 to release the brake simple press the grey pedal with
your foot.
Fig 7.
How to Adjust the Canopy:
Pull forward or press back ward the canopy wire to open or close the
canopy.
Fig 8.
How to use the front swivel lock:
Press down on the swivel lock lever to swivel. Pull back the swivel lock
lever and fix it into the base notch so the wheel can move steadily.
A
Fig 9.
How to Adjust the Backrest:
To raise the back seat hold the adjusting buckle (point A) tightly grasp
the plastic ring fixed to the end of the adjusting webbing and pull up.
To lower the seat press down the grey button and pull back the seat.
WARNING: Do not adjust the seat while the child is in the stroller.

Fig 10.
How to Use the Restraint System:
To unlock buckle press on on the centre button and pull harness
out from each side.
to buckle, push each side of harness back into buckle until
each side clicks in place.
USE THIS HARNESS AT ALL TIMES
WARNING
Fig 11.
top loop
strap end
male buckle
How to Adjust the Waist Strap Length:
To shorten, pull bottom loop (2) down then pull on strap end (1)
To Lengthen, pull out top loop (3) then pull out from the buckle.
A
CD
B
Folding latch
3
4
4
5
Fig 12.
To Fold the stroller:
A. Press down on the button on the upper lock (1) and push down on the upper
lock (2)
B. Press the small grey button (3) on the top of the right handle,slide up the folding
latches (4) on the handles and push forward the handles at the same time.
C. Press them down to fold the frame (5)
D. Folded Frame

Attaching the Tether Strap.
Please ensure you attach the tether strap
to the handle of the stroller by using a loop
to better control the stoller and so it
does not get out of reach.

Head Office:
Love N Care Pty Ltd.
297-299 Canterbury Rd, Revesby
NSW 2212 Australia
Contact No: 02 9774 4655
Fax: [phone]
Email: [email protected]
Website: www.lovencare.com.au
Contact Us
Brisbane
7-9 Eileen Street
Underwood QLD 4119 Australia
Contact No: 07 3290 4217
Fax: [phone]
Western Australia
5 Modal Crescent
Canning Vale WA 6155 Australia
Contact No: 08 9455 4972
Fax: [phone]
Ireland
DMG House
Deansgrange Industrial Estate
Deansgrange Co. Dublin
Phone: [phone]
Fax: [phone]
Website: www.lovencare.ie