Lovencare BP 9760 Twin Go User manual

Instruction Manual
BP 9760
PLEASE KEEP INSTRUCTIONS FOR FUTURE REFERENCE
GO
TWIN
TWIN

Congratulations on your new quality Love N Care product from our exclusive range of baby products.
Your new product has been manufactured to comply with the Highest Quality Standards and comes
with a 12-month warranty.
As you will soon learn there are many more great features about your new Love N Care product.

Care should be taken if the stroller is to be used on stairs or escalators.
FOLLOW THE MANUFACTURER’S INSTRUCTIONS.
To avoid serious injury always use the harness provided to secure the child.
(Adjust the straps to suit the body size of your child)
THE MAXIMUM WEIGHT FOR THE SEAT UNIT IS 18KG (EACH)
THE MAXIMUM WEIGHT FOR THE CARRY COT IS 9KG.
THE MAXIMUM WEIGHT FOR THE BASKET IS 6KG
THE MAXIMUM TOTAL WEIGHT FOR THE STROLLER IS 42KG
PUT ON ALL THE BRAKES WHENEVER YOU PARK THE STROLLER.
ALWAYS APPLY THE BRAKES WHENEVER THE STROLLER IS STATIONARY.
Care should be taken whilst folding and unfolding stroller to prevent fingers being trapped.
Ensure your child’s fingers, hands and all other body parts are clear from any moving
part when adjusting the seat or handle on your stroller.
This stroller should not be used near an open fire or an exposed flame.
It is unsafe to use accessories other than those supplied or approved by Love N Care.
Safety guidelines and instructions must always be followed before making use of this product,
please retain these instructions for future reference.
This product complies with product standard AS/NZS 2088:2009
WARNING: TO AVOID INJURY OR DEATH:
DO NOT LEAVE CHILDREN UNATTENDED.
SECURE THE CHILD IN THE HARNESS AT ALL TIMES.
DO NOT CARRY EXTRA CHILDREN OR BAGS ON THIS STROLLER.
MAKE SURE CHILDREN ARE CLEAR OF ANY MOVING PARTS IF YOU ADJUST THE
STROLLER, OTHERWISE THEY MAY BE INJURED.
USE THE HARNESS ATALL TIMES.
WHEN NOT IN USE DISCONNECT SHOULDER STRAPS FROM THE WAIST STRAP
AND/OR BUCKLE.
The harness can form loops which may be a strangulation hazard. Never leave a harness
connected when not fitted to a child in the stroller.
Do not use this seat with any other stroller.
Do not use the bassinet (if purchased) once the child can sit up.

1. 2. 3.
4.
5.
6.
7.
8.
9.
WHAT YOU SHOULD HAVE INSIDE.
1. TWINGO FRAME
2. 2-FRONT WHEELS
3. 2-REAR WHEELS
4. 2-BUMPER BARS
5. BASKET
6. 2-SEAT UNITS
7. BOOT COVERS FOR SEAT UNIT(SOLD SEPERATELY)
8. CARRY COT (SOLD SEPERATELY)
9. BOOT COVER FOR CARRY COT
(SOLD WITH CARRY COT)
10. MOSQUITO NET(SOLD SEPERATELY)
11. TETHER STRAP
WHATS INSIDE THE BOX
10.
11.

HOW TO ASSEMBLE
LAY THE FRAME ON THE FLOOR
UNLOCK THE FOLDING CATCH ON THE
RIGHT AND LEFT HAND SIDE
UNFOLD THE FRAME
ONCE THE LATCH IS RELEASED
PULL THE HANDLE UP
UNTIL IT LOCKS INTO PLACE.
ENSURE ALL THREE ENDS ARE
LOCKED INTO PLACE.
TUG ON THEM TO ENSURE THEY
ARE SECURED.
THE ASSEMBLED FRAME SHOULD
LOOK LIKE THIS
RELEASE THE CATCH BY
SQUEEZING THE BUCKLES
INWARDS

HOW TO ASSEMBLE
ATTACHING THE FRONT WHEELS
INSERT THE FRONT WHEEL
PART NO.2 INTO THE FRONT
HOUSING AS SHOWN UNTIL IT
CLICKS INTO PLACE.
REPEAT ON BOTH SIDES.
FRONT HOUSING
FRONT WHEEL
PULL ON THE FRONT WHEELS TO
ENSURE THEY ARE ASSEMBLED
CORRECTLY.
ASSEMBLED
FRONT WHEELS
ATTACHING THE REAR WHEELS
REAR HOUSING
REAR WHEEL
PLACE THE STROLLER ON ITS
SIDE AND INSERT PART NO 3.
REAR WHEEL INTO THE REAR
HOUSING
PUSH DOWN TO
LOCK WHEEL IN
PUSH DOWN THE CENTRE
BUTTON WHEN THE REAR
WHEEL IS IN THE AXEL.
MAKE SURE THAT THE WHEELS
ARE FIRMLY LOCKED.
THE ASSEMBLED REAR WHEEL
SHOULD HAVE THE MIDDLE
BUTTON FLUSH WITH THE FRAME
OF THE WHEEL.
THE FRAME WITH THE
WHEELS ASSEMBLED
SHOULD LOOK LIKE THIS

HOW TO ASSEMBLE
HOW TO ASSEMBLE THE BASKET
SNAP THE CLIPS
TOGETHER
CURL THE MATERIAL
AROUND THE FRAME
AND SNAP THE CLIPS
TOGETHER
ENSURE ALL THE BUTTONS
ARE CLIPPED IN.
THE ASSEMBLED BASKET
SHOULD LOOK LIKE THIS.
TO REMOVE THE BASKET JUST
UNCLIP ALL THE BUTTONS.
ATTACHING THE SEAT TO THE FRAME
IN ORDER TO ATTACH THE
SEAT UNIT PLACE THE SEAT ON
THE FRAME. MAKE SURE EACH
OF THE SIDES OF THE SEAT UNIT
ARE PUSHED DOWN INTO THE
OPENINGS. IN ORDER TO REMOVE THE SEAT
UNIT PUSH THE RED BUTTON ON
BOTH SIDES AND LIFT THE SEAT OFF
THE FRAME.
FRONT FACING
POSITION
REAR FACING
POSITION
THE STROLLER CAN BE
PLACED IN EITHER FRONT
FACING OR REAR FACING
POSITION OR BOTH AT
THE SAME TIME.
WARNING
AFTER ATTACHING THE SEAT TO THE FRAME,
PLEASE ATTACH THE BELT ON THE BACKREST
TO THE LEG TUBE FIRST.
BEFORE RELEASING THE SEAT , PLEASE
RELEASE THE BELT FROM THE LEG TUBE.

HOW TO ASSEMBLE
HOW TO ASSEMBLE/REMOVE THE BUMPER BAR
TO PLACE THE BUMPER BAR ON THE
SEAT UNIT YOU MUST PLACE THE
ENDS OF THE BAR IN THE HOLDING
HOLES PROVIDED ON EACH SIDE OF
THE UNIT UNTIL IT LOCKS INTO PLACE
IN ORDER TO REMOVE THE BAR
FROM THE SEAT UNIT PRESS THE 2
PLASTIC CLOPS ON EACH SIDE
THEN LIFT THE BAR OUT.
PLEASE NOTE THE BUMPER BAR SHOULD NOT BE USED TO CARRY THE SEAT UNIT
WITH THE CHILD INSIDE
HOW TO ASSEMBLE THE BOOTCOVER
(SOLD SEPERATELY)
SNAP THE
CLIPS TOGETHER
TO ASSEMBLE THE BOOTCOVER ON
THE SEAT UNIT PLACE IT OVER THE
FOOTREST AND SNAP THE CLIPS
ON THE BASE OF THE SEAT WITH
THE ONES ON THE BOOTCOVER.
THEN CURL THE TOP OF THE
BOOTCOVER OVER THE BUMPER
BAR AND SNAP THE CLIPS TOGETHER
THE ASSEMBLED BOOTCOVER

HOW TO ASSEMBLE
HOW TO ASSEMBLE THE CARRY COT
(SOLD SEPERATELY)
SET UP THE BASE
ONCE UNPACKED YOU WILL HAVE TO
ENSURE THAT THE BASE AND THE
SIDES OF THE CARRY ARE ASSEMBLED.
PUSH BOTH OF THE STEEL BRACES INTO
THE CATCHMENT.
MAKE SURE THE BRACES ARE PROPERLY
LOCKED INTO PLACE BEFORE FIXING THE
COVER
STEEL BRACES
CATCHMENT
FITTING THE COVER
STEEL BRACES IN CATCHMENT
TO PLACE THE COVER OF THE CARRY COT
DRAW ONE END OF THE COVER OVER THE
BOTTOM END, THEN STRETCH THE COVER
OVER THE OTHER END AND OVER THE
SIDES.
FASTEN THE COVER TO THE SIDES BY
CLOSING THE VELCRO. THEN ADD THE
MATTRESS.
FASTEN THE VELCRO FASTENED COVER WITH MATTRESS
ATTACHING THE HOOD
TO PLACE THE HOOD ON THE
SEAT UNIT YOU MUST PLACE THE
ENDS OF THE BAR IN THE HOLDING
HOLES PROVIDED ON EACH SIDE OF
THE UNIT UNTIL IT LOCKS INTO PLACE
ASSEMBLED HOOD

HOW TO ASSEMBLE
HOW TO ATTACH THE RAINCOVER
THE RAINCOVER CAN BE USED WHILST ATTACHED TO THE FRAME.
PLACE IT OVER THE SEAT UNIT.
ENSURE THAT THE BREATHEABLE HOLES ARE AT FRONT OF THE
UNIT. CONNECT THE ENDS WITH THE VELCRO.
ATETHERSTRAP ISTOBEFITTED TOTHISSTROLLER.PLACE THE LOOPOVER THEDESIREDWRISTWHENUSINGTHE
STROLLER.IFYOU NEED TOCHANGETHEWRIST,LOOSEN THE TETHERSTRAPANDSLIDETOTHEDESIREDSIDEOFTHE
HANDLE.
ATTACHING THE TETHER STRAP
ASSEMBLED TETHER STRAP
(SOLD SEPERATELY)
TO ATTACH THE TETHER STRAP LOOP IT OVER THE HANDLE. OPEN THE END OF THE TETHER STRAP HANGING
OVER THE HANDLE AND INSERT THE OPPOSITE END THROUGH THE OPENING CREATED. PULL UNTIL THE
TETHER STRAP IS TIGHTENED AROUND THE HANDLE.
WARNING
USE THIS STRAP TO STOP THE
STROLLER ROLLING AWAY

HOW TO USE
HOW TO LOCK/REMOVE FRONT/REAR WHEELS
TO LOCK THE FRONT SWIVEL WHEELS PUSH
DOWN WITH YOUR FOOT ON THE FRONT SWIVEL.
TO UNLOCK (SWIVEL MODE) LIFT THE SWIVEL LOCK UP.
WHEN THE FRONT WHEEL IS LOCKED THE
SWIVEL WOULD BE CAUGHT ON THE FRAME OF
THE WHEEL.
SWIVEL MODE: SHOULD BE USED FOR EVERYDAY USE OR ON SMOOTH SURFACES AND TIGHT CORNERING.
LOCKED MODE: SHOULD BE USED ON UNEVEN SURFACES OR WHEN WALKING QUICKLY.
LOCK/UNLOCK FRONT WHEELS
REMOVE FRONT WHEELS
TO REMOVE THE FRONT WHEEL PRESS THE BUTTON ON THE FRONT TO
RELEASE THE WHEEL OUT OF THE AXEL.
REMOVE REAR WHEELS
TO REMOVE THE REAR WHEEL PRESS THE BUTTON ON THE CENTRE TO
RELEASE THE WHEEL OUT OF THE AXEL.

HOW TO USE
HOW TO ADJUST THE BUMPER BAR
TO ADJUST THE POSITION OF THE
BUMPER BAR YOU NEED TO DEPRESS
THE 2 BUTTONS ON THE INSIDE OF THE
SEAT UNIT.
THE BUTTONS ARE LOCATED ON
EACH SIDE OF THE UNIT
BUMPER BAR UPWARDS BUMPER BAR MID SECTION BUMPER BAR DOWNWARDS
HOW TO ADJUST THE BACKREST
TO LOWER: PULL THE REAR LOOP DOWN.
THE SEAT WOULD THEN RECLINE.
TO RAISE: PUSH UP THE ACTUAL BACK REST
WITH YOUR HANDS AND PULL THE
MATERIAL DOWN. THE SEAT WILL THEN
RISE.
RECLINED SEAT UNIT
SHOULD BE USED FOR NEWBORNS
AND SLEEPING TODDLERS
UPRIGHT SEAT UNIT
SHOULD BE USED FOR
TODDLERS

HOW TO USE
HOW TO ADJUST THE FOOTREST
TO ADJUST THE FOOTREST
PUSH THE BUTTONS ON EACH
SIDE OF THE BASE OF THE
SEAT UNIT.
YOU CAN PUSH THE FOOTREST
UP OR DOWN DEPENDING ON
WHAT POSITION YOU LIKE.
HOW TO USE THE SAFETY HARNESS
THIS STROLLER HAS BEEN DESIGNED WITH
A 5-POINT HARNESS FOR THE SAFETY OF
YOUR CHILD.
CAREFULLY PLACE YOUR CHILD INTO THE
SEAT AND BRING THE SAFETY HARNESS
AROUND THE CHILDS WAIST AND OVER
THE CHILDS SHOULDERS.
PLACE THE CROTCH STRAP BETWEEN YOUR
CHILDS LEGS. TIGHTEN THE HARNESS TO BE
SNUG AROUND THE CHILDS WAIST AND OVER
ITS SHOULDERS.
ATTACH EACH OF THE SHOULDER STRAPS TO
THE CROTCH STRAP BUCKLE WITH EACH END.
REPEAT THIS FOR BOTH SHOULDER STRAPS.
ONCE EACH SHOULDER STRAP IS ATTACHED ON
THE WAIST BUCKLE INSERT THE WAIST STRAP
END TO THE BUCKLE. REPEAT FOR BOTH SIDES.
THEY SHOULD SNAP IN. (PULL ON THEM TO TEST)
TO RELEASE THE HARNESS PRESS THE CENTRE
BUTTON.
YOUR CHILD SHOULD BE SECURELY HARNESSED AT
ALL TIMES AND SHOULD NEVER BE LEFT UNATTENDED
USE THIS HARNESS AT ALL TIMES
WARNING
CROTCH STRAP
WAIST STRAP
SHOULDER STRAPS
CENTRE BUTTON
ADJUST THE STRAP TO BE SNUG FOR THE SHOULDER STRAPS
WARNING

HOW TO USE
HOW TO FOLD THE STROLLER
IN ORDER TO FOLD THE STROLLER YOU MUST
1. PULL UP THE BLACK HOLDER IN THE CENTRE UNTIL
IT STAYS IN POSITION.
2. PULL UP THE SECOND CATCHES ON BOTH SIDES UNTIL
THEY MOVE UP.
3. PUSH THE HANDLE DOWN TOWARDS THE REAR
WHEELS UNTIL THE STROLLER IS FOLDED.
1.
2.
2.
1.
PULL UP CENTRE HOLDER
2.
2.
PULL UP THE SIDE CATCHES
3.
PULL THE HANDLE TOWARDS THE REAR WHEEL
FOLDED STROLLER
ONCE THE STROLLER IS FOLDED
PLACE THE STRAPS FROM EACH
SIDE OF THE STROLLER ON TO
THE SIDES RIVETS.
THIS IS TO ENSURE THE STROLLER
DOES NOT OPEN WHILST
TRAVELLING.
TO OPEN PULL THE CATCH DOWN
TO RELEASE.

CLEANING AND MAINTENANCE
ALL LOVE N CARE PRODUCTS HAVE ONE YEAR WARRANTY FROM THE DATE OF PURCHASE.
IT IS RECOMMENDED TO REGULARLY INSPECT AND MAINTAIN MOVEMENT OF LOCKING DEVICES AND SECURITY
OF ESSENTIAL COMPONENTS.
REGULARLY CHECK ALL PARTS FOR WEAR AND TEAR.
DO NOT USE SPRAY LUBRICANTS, SIMPLY WIPE CLEAN AFTER USE.
THE SEAT LINER CAN BE CLEANED BY SPONGING WITH WARM SOAPY WATER AND A MILD DETERGENT. A MILD
DISINFECTANT MAY BE USED IF DESIRED.
STUBBORN MARKS MAY BE REMOVED WITH A NON ABRASICE CREAM CLEANER.
NEVER CLEAN WITH ABRASIVE, AMMONIA BASED, BLEACH BASED OR SPIRIT TYPE CLEANERS.
IF THE WHEELS BECOME DAMAGED OR WORN DISCONTINUE USE AND REPLACE.
FABRIC CARE
- HAND WASH ONLY
- DO NOT BLEACH
- DO NOT TUMBLE DRY
- DO NOT IRON
- DO NOT WRING
- DO NOT DRY CLEAN

Head Office:
Love N Care Pty Ltd.
297-299 Canterbury Rd, Revesby
NSW 2212 Australia
Contact No: 02 9774 4655
Fax: [phone]
Email: [email protected]
Website: www.lovencare.com.au
Contact Us
Brisbane
7-9 Eileen Street
Underwood QLD 4119 Australia
Contact No: 07 3290 4217
Fax: [phone]
Western Australia
5 Modal Crescent
Canning Vale WA 6155 Australia
Contact No: 08 9455 4972
Fax: [phone]
Ireland
DMG House
Deansgrange Industrial Estate
Deansgrange Co. Dublin
Phone: [phone]
Fax: [phone]
Website: www.lovencare.ie