About the product
The Loxone Motion Sensor is used to detect motion and bright-
ness for home and similar non safety critical applications.
Features
• Motion Detection
• Brightness Detection
Installation
Install the mounting ring on the desired installation place.
Power up the device and pair it with your Miniserver in Loxone
Config. To finish the installation attach the Loxone Motion
Sensor on the mounting ring.
For additional information, declaration of confirmity,
visit www.loxone.com/help/motion-sensor-air
Information
Contains FCC ID: COR-ZWIR4512AC1
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference
2. This device must accept any interference received, including
interference that may cause undesired operation
Connection
Wire Diameter 0.25...0.8mm² /
AWG23...AWG18
Exposed Wire Length 5mm / 0.2”
Push-In-Technology To make connection, insert the
wire; to remove the wire twist
and pull at the same time.
Learn
Button
24V power
supply
attachment for
mounting ring
attachment for
mounting ring
mounting
ring
