LOXONE Water Sensor Air User manual

Loxone Electronics GmbH
Smart Home 1
4154 Kollerschlag
Austria
loxone.com
Need Help?
loxone.com/support
V290321
Part No: 100211
Water
Sensor
Air
Technical Specifications
Power supply CR2032 battery
Battery lifetime up to 2 years
Learn button can also be used as a push
button
Ambient temperature 0 ... 55°C / 32 ... 131°F
Safety rating IP20
Interfaces Loxone Air:
868MHz (SRD Band Europe),
4 channels available
max. Power 15.1mW e.r.p.
915MHz (ISM Band Region 2),
10 channels available
max. Power 13.2mW
internal antenna
Maintenance & Cleaning This device is free of main-
tenance and may only be
cleaned with a dry cloth. The
function of the device can be
tested with a wet fingertip.
Sensor contact pins
Humidtiy max. 95% r.H. (non condensing)

About the product
The Loxone Water Sensor Air is triggered when it comes into
contact with two conductive fluids.
Features
•water sensor
For additional information, declaration of confirmity,
visit www.loxone.com/help/air
Installation & electrical connection
If the device is not installed according to manufacturers
guidelines the protection of the device may be affected.
Information
Contains FCC ID: 2ARRV-000376
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference
2. This device must accept any interference received,
including interference that may cause undesired operation
Positive
side up
Learn Button / Slide to eject battery
water contacts