LOXONE WINDOW HANDLE AIR User manual

www.loxone.com
GET IN TOUCH!
o[e-mail]
www.loxone.com/contact
NEED HELP?
For further information and documentation please visit:
www.loxone.com/help/Window_Handle_Air
WINDOW
HANDLE AIR
Part No.: 100177
Power Supply 2x 1.5V AA batteries
Battery Lifetime Approx. 2 years pending
on the use
Indoor Range Up to 30m
Frequency 868MHz (SRD Band Europe),
915MHz (ISM Band Region 2)
Ambient Temperature 0...50°C
Humidity 95% r.H (non condensing)
Safety Rating IP20
Maintenance & Cleaning
This device is free of
maintenance and may only be
cleaned with a dry cloth.
Technical Specications
For additional information, visit
www.loxone.com/help/Window_Handle_Air
Contains FCC ID: COR-ZWIR4512AC1
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1. This device may not cause harmful interference
2. This device must accept any interference received, including
interference that may cause undesired operation
Information

Installation
To open the cover hold cover on both sides and gently pull
towards you.
Adjust of the square spindle to the required length and lock in
place by tightening the xing screw using the provided hex key.
Next use the, for your square spindle length needed, mounting
screws to secure the handle on the window frame.
Learn Button
Fixing Screw
Status LED
Square Spindle
Mounting
Screws
Top:
50 or 60mm
Bottom:
40 or 50mm
Cover
About the product
The Loxone Window Handle Air detects if a window has been
left unsecured based on the three positions of the handle: clo-
sed, open, tilt. Additionally an internal sensor detects vibrations
and alerts you if the window is forcefully opened whilst you are
not at home. It can be used to control a variety of non-safety
critical functions in your smart home.
Features
• Detects window position: closed, open, tilt
• Detects a forceful opening through vibrations
Square Spindle Length Mounting Screw Length
32 & 37mm M5 40 & 50mm
43mm M5 50 & 60mm
Square spindle to mounting screw ratio
Power up your Window Handle Air by using the provided AA
batteries. The Window Handle Air will now go immediately
into learning mode for the pairing with your Miniserver.
To nish the installation push the
cover towards the window frame.