LOXONE Water Sensor Air User manual

Loxone Electronics GmbH
Smart Home 1
4154 Kollerschlag
Austria
loxone.com
Need Help?
loxone.com/support
V060420
Part No: 100211
Water
Sensor
Air
Technical Specifications
Power supply CR2032 battery
Battery lifetime up to 2 years
Learn button can also be used as a push
button
Ambient temperature 0 ... 55°C / 32 ... 131°F
Safety rating IP20
Interfaces Loxone Air:
868MHz (SRD Band Europe),
4 channels available
915MHz (ISM Band Region 2),
10 channels available
max. Power 3.16mW
Maintenance & Cleaning This device is free of main-
tenance and may only be
cleaned with a dry cloth. The
function of the device can be
tested with a wet fingertip.
Sensor contact pins
Humidtiy max. 95% r.H. (non condensing)

About the product
The Loxone Water Sensor Air is triggered when it comes into
contact with two conductive fluids.
Features
•water sensor
Installation & electrical connection
If the device is not installed according to manufacturers
guidelines the protection of the device may be affected.
For additional information, declaration of confirmity,
visit www.loxone.com/help/air
Information
Contains FCC ID: COR-ZWIR4512AC1
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference
2. This device must accept any interference received,
including interference that may cause undesired operation
Positive
side up
Learn Button / Slide to eject battery
water contacts