LOXONE Room Comfort Sensor Air User manual

Loxone Electronics GmbH
Smart Home 1
4154 Kollerschlag
Austria
loxone.com
Need Help?
loxone.com/support
V220420
Part No: 100264 (White)
Part No: 100265 (Anthracite)
Room
Comfort
Sensor
Air
Technical Specifications
Ambient temperature -20 ... 55°C / -4 ... 131°F
Dimensions 80x80x18mm /
3.15x3.15x0.71” (LxWxH)
Maintenance & Cleaning This device is free of main-
tenance and may only be
cleaned with a dry cloth.
Power supply 9 ... 28VDC or
2x 1.5V AAA batteries
Power consumption battery: typ. 0.02mW, max. 50mW
external power supply: typ. 65mW,
max. 85mW
Power loss max. 85mW
Safety rating IP20
Humidity max. 95% r.H. (non condensing)
Temperature detection range -40 … 125°C / -40 … 257°F;
+/- 0.5°C / 0.9°F
Humidity detection range 0 … 100% r. H. +/- 2% (non
condensing)
Interfaces Loxone Air:
868MHz (SRD Band Europe),
4 channels available
915MHz (ISM Band Region 2),
10 channels available
max. Power 3.16mW
Battery lifetime up to 2 years

About the product
The Room Comfort Sensor Air ensures rooms are always
comfortable, by measuring temperature and humidity.
Together with the Miniserver, this information can be used
to control, monitor and record statistics for the temperature
and air quality in a room.
Features
• Temperature sensor
• Humidity sensor
Installation
You can power your Room Comfort Sensor Air by using the AAA
batteries provided or by powering it up with SELV. If using bat-
teries, pull off the orange/white Power Supply clamp and insert
the provided AAA batteries. There are two mounting options,
freestanding and wall-mounted. To configure for freestanding
use, attach the back cover provided. If wall-mounted, you have
the option to use SELV to power your device. Fix the mounting
plate to your back box.
If powering by SELV, connect power to the Room Comfort
Sensor Air through the frame. Place the Room Comfort Sensor
including the frame on top of the mounting plate and gently
push to clip into place. Once powered up, configure the Room
Comfort Sensor in the usual easy way with Loxone Config.
For additional information, declaration of confirmity,
visit www.loxone.com/help/room-comfort-sensor-air
Information
Contains FCC ID: COR-ZWIR4512AC1
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference
2. This device must accept any interference received,
including interference that may cause undesired operation
Freestanding
Cover
Mounting Plate
Frame
Learn Button Status LED
This folder is a part of the product!
Connection
Wire cross-section
0.25 ... 0.8mm² / AWG18 ... 23
Stripping length 5mm / 0.2”
Temperature resistance
-40 … 105°C / -40 … 221°F
Orange / White + 24VDC / GND
Learn Button Status LED