LOXONE NFC Code Touch for Nano User manual

Technical Specifications
Power supply via Nano IO Air
Power consumption typ. 0.02W, max. 0.6W
(while reading NFC)
Safety Rating IP20
Maintenance & Cleaning This device is free of main-
tenance and may only be
cleaned with a dry cloth.
Loxone Electronics GmbH
Smart Home 1
4154 Kollerschlag
Austria
loxone.com
Need Help?
loxone.com/support
V140420
Part No: 100301 (White)
Part No: 100307 (Anthracite)
NFC
Code
Touch
for Nano
Power loss 0.6W
Ambient temperature -20 … 70°C / -4 … 158°F
Humidity max. 95% r.H. (non condensing)
Access possibilities NFC, Key code
Click feedback Yes
Touch points capacitive touch detection

About the product
Get access with encrypted or unencrypted NFC tags, via your
NFC enabled smartphone or through your own unique key
code.
Features
• Authentication via encrypted and unencrypted NFC Tags or
NFC enabled smartphones or key code
• Supports permanent, disposable or time-limited key codes
• Universal button
• Alarm-authentication
Important Information
For security reasons, we strongly suggest you only use encryp-
ted NFC tags for access control from Loxone.
Installation
Attach the mounting frame of the NFC Code Touch to
the Nano IO Air. Install the Nano IO Air in an appropriate
installation box and fix the mounting frame to it. To finish
the installation attach the NFC Code Touch as shown on the
mounting frame.
For additional information, declaration of confirmity,
visit www.loxone.com/help/nfc_code_touch
Attach hereNFC Sensor Universal
button