LOXONE NFC Code Touch Tree User manual

Technical Specifications
Power supply 9 ... 28VDC
Power consumption typ. 0.05W, max. 0.8W (while
reading NFC)
Ambient temperature -20 ... 55°C / -4 ... 131°F
Humidity max. 95% r.H. (non condensing)
Maintenance & Cleaning This device is free of main-
tenance and may only be
cleaned with a dry cloth.
Connection Loxone Electronics GmbH
Smart Home 1
4154 Kollerschlag
Austria
loxone.com
Need Help?
loxone.com/support
Part No: 100300 (White)
Part No: 100306 (Anthracite)
NFC
Code
Touch
Tree
V140420
Wire cross-section 0.25 ... 0.8mm² / AWG23 ... 18
Stipping length 5mm / 0.2"
Temperature resistance -40 … 105°C / -40 … 221°F
Interfaces Loxone Tree:
connection with Miniserver /
Tree Extension
Access possibilities NFC, Key code
Click feedback Yes
Touch points capacitive touch detection
Safety rating IP44
Power loss max. 0.8W

About the product
Get access with encrypted or unencrypted NFC tags, via your
NFC enabled smartphone or through your own unique key
code.
Features
• Authentication via encrypted and unencrypted NFC Tags or
NFC enabled smartphones or key code
• Supports permanent, disposable or time-limited key codes
• Universal button
• Alarm-authentication
Important Information
For security reasons, we strongly suggest you only use encryp-
ted NFC tags for access control from Loxone.
Installation
Install the mounting frame of the NFC Code Touch on the desi-
red installation place. Power up the device and pair it with your
Miniserver in Loxone Config. To finish the installation, attach
the NFC Code Touch as shown on the mounting frame.
For additional information, declaration of confirmity,
visit www.loxone.com/help/nfc_code_touch
Attach hereNFC Sensor Universal
button Loxone TreePower supply