LumaPro 30UH85 User manual

Please read and save these instructions. Read through this owner’s manual carefully before
using product. Protect yourself and others by observing all safety information, warnings, and
cautions. Failure to comply with instructions could result in personal injury and/or damage to
product or property. Please retain instructions for future reference.
Operating Instructions 30UH85, 30UH86, 30UH87
LED FLOOD LIGHT
Manufactured for Grainger International, Inc.
Printed in China 04/14
Form# LT
-
2178
Description
LumaPro LED Flood Lights are efficient, energy saving replacements for metal halide and
quartz halogen fixtures, containing an integral listed driver. The fixtures can mount at a
broad range of angles with a yoke mount.
30UH85 30UH86 30UH87
CONSTRUCTION
 Heavy-duty die cast aluminum one piece housing
 Copper plating provides high thermal transfer rate, minimizing junction temperature of LED
 All models come standard with a yoke and a 1/2’’ NPT strain relief fitting
Specifications and Dimensions
30UH85 100-277V 15W 1100 5000K 65 4-1/2” x 3-13/32” x 3-13/32”
30UH86 100-277V 25W 1725 5000K 65 7-3/32” x 5-19/32" x 4-13/64"
30UH87 100-277V 45W 3358 5000K 66 8-29/32" x 7-19/64"x 5-13/64"
Dimensions (in)
Model Volts Watts Lumen CCT CRI L” x W” x H”

2
LumaPro O
p
eratin
g
Instructions 30UH85, 30UH86, 30UH87
LED Flood Light
General Safety Information
READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
 Review the diagrams thoroughly before beginning.
 All electrical connections must be in accordance with local codes, ordinance, and the
National Electric Code. If you are unfamiliar with methods of installing electrical wiring,
secure the services of a qualified licensed electrician.
 Before starting the installation, disconnect the power by turning off the circuit breaker or
by removing the appropriate fuse at the fuse box. Turning the power off using the light
switch is not sufficient to prevent electrical shock.
 Equipment should be mounted in locations and at heights where it will not readily be
subject to tampering by unauthorized personnel.
 Do not use this equipment for other than intended use.
Risk of fire or electric shock. Installation requires knowledge of
the lighting luminaires electrical systems. If not qualified, do not attempt installation
and contact a qualified electrician.
Wiring Diagram
Turn off electrical power at fuse or circuit breaker box before wiring
fixture to the power supply.
Connecting Driver to AC source supply:
Operating Temp: -30 F to 130F Degrees
1. All units must be individually connected to the AC supply
Black = Line
White = Neutral
Green = Ground
2. Line connection to be made to switch lead from source.

3
LumaPro O
p
eratin
g
Instructions 30UH85, 30UH86, 30UH87
LED Flood Light
Installation
Do not make or alter any open holes in an enclosure of wiring or
electrical components during installation.
Before installation, ensure if power supply is disconnected.
1. Use ½ NPT fitting on yoke connect feed power lead
through weatherproof Junction Box cover (not
included).
2. Cut and strip lead to proper length.
3. Connect supply wires to quick connect supplied
Black/Hot supply with black wire.
White/Neutral supply with white wire. Connect
ground wire with green wire.
4. Make sure connections are secured.
5. Mount fixture with Junction Box cover to junction
box.
6. With Phillips head screwdriver, loosen yoke screws
on both sides to aim fixture.(Figure 1)
7. When finished, tighten screws to keep flood light in
position.
Figure 1
Exploded View
Warranty
LIMITED FIVE-YEAR WARRANTY
Should this product fail to perform satisfactorily due to a defect or poor workmanship within
FIVE YEAR from the date of purchase, return it to the place of purchase and it will be
replaced, and free of charge. Incidental or consequential damages are excluded from this
warranty.
Manufactured for Grainger International, Inc.
100 Grainger Pkwy., Lake Forest IL 60045
U.S.A.