Lumens DC-F80 User manual

DC-F80
4K Document Camera
User Manual - English
[Important]
To download the latest versions of
the Quick Start Guide, multilingual user manual,
software, driver, etc., please visit Lumens
https://www.MyLumens.com/support

English- 1
Table of Contents
Copyright Information.......................................................................................3
Chapter 1 Safety Instructions........................................................................4
Chapter 2 Package Contents.........................................................................5
Chapter 3 Product Overview .........................................................................6
3.1 Overview...................................................................................................... 6
3.2 Extension angle........................................................................................... 6
3.3 Precautions for Operation........................................................................... 7
3.4I/O functions Introduction............................................................................ 7
3.5 Description of LED indicator....................................................................... 8
3.6 Relative position of the presenter and document..................................... 9
Chapter 4 Installation and Connections.....................................................10
4.1 Machine Size.............................................................................................10
4.2 Installation and setup................................................................................ 10
4.3 Connect to a projector, monitor or HDTV (HDMI mode).........................11
4.4 Connect to a computer and use Lumens™ software (USB Mode)........11
4.5 InstallingApplication Software..................................................................12
Chapter 5 Start Using...................................................................................13
5.1 Direct Use (HDMI Mode)..........................................................................13
5.2 Use with Ladibug (USB Mode).................................................................13
Chapter 6 Introductions to Control Panel Buttons....................................15
Chapter 7 Descriptions of Major Functions...............................................16
7.1 I would liketo automatically adjust the image to have the best
brightness and focusing performance.....................................................16
7.2 I would like to freeze the live image.........................................................16
7.3 I would like to turn on/off the lamp........................................................... 16
7.4 I would liketo zoom in/out images........................................................... 16

English- 2
7.5 I would liketo adjust the brightness.........................................................16
7.6 I would liketo rotate the image.................................................................16
7.7 I would liketo enlarge a part of the image............................................... 17
Chapter 8 DIP Switch Setting ......................................................................18
8.1 Description of DIP..................................................................................... 18
8.2 Resolution Switch......................................................................................18
Chapter 9 Troubleshooting..........................................................................19
Supplier's Declaration of Conformity 47 CFR § 2.1077 Compliance Information..20

English- 3
Copyright Information
Copyrights © Lumens Digital Optics Inc. All rights reserved.
Lumens is a trademark that is currently being registered by Lumens Digital Optics
Inc.
Copying, reproducing or transmitting this file is not allowed if a license is not
provided by Lumens Digital Optics Inc. unless copying this file is for the purpose
of backup after purchasing this product.
In order to keep improving the product, Lumens Digital Optics Inc. hereby
reserves the right to make changes to product specifications without prior notice.
The information in this file is subject to change without prior notice.
To fully explain or describe how this product should be used, this manual may
refer to names of other products or companies without any intention of
infringement.
Disclaimer of warranties: Lumens Digital Optics Inc. is neither responsible for any
possible technological, editorial errors or omissions, nor responsible for any
incidental or related damages arising from providing this file, using, or operating
this product.

English- 4
Chapter 1 Safety Instructions
Always follow these safety instructions when using the product:
1 Operation
1.1 Please use the product in the recommended operating environment, away from water or source of heat.
1.2 Do not place the product on a tilted or unstable trolley, stand or table.
1.3 Please clean the dust on the power plug prior to usage. Do not insert the product’s power plug into a
multiplug to prevent sparks or a fire.
1.4 Do not block the slots and openings in the case of the product. They provide ventilation and prevent the
product from overheating.
1.5 Do not open or remove covers, otherwise it may expose you to dangerous voltages and other hazards.
Refer all servicing to licensed service personnel.
1.6 Unplug the product from the wall outlet and refer servicing to licensed service personnel when the
following situations happen:
If the power cords are damaged or frayed.
If liquid is spilled into the product or the product has been exposed to rain or water.
2 Installation
2.1 For security considerations, please make sure the standard hanging rack you bought is in line with UL or
CE safety approbations and installed by technician personnel approved by agents.
3 Storage
3.1 Do not place the product where the cord can be stepped on as this may result in fraying or damage to the
lead or the plug.
3.2 Unplug this product during thunderstorms or if it is not going to be used for an extended period.
3.3 Do not place this product or accessories on top of vibrating equipment or heated objects.
4 Cleaning
4.1 Disconnect all the cables prior to cleaning and wipe the surface with a dry cloth. Do not use alcohol or
volatile solvents for cleaning.
5 Batteries (for products or accessories with batteries)
5.1 When replacing batteries, please only use similar or the same type of batteries.
5.2 When disposing of batteries or products, please adhere to the relevant instructions in your country or
region for disposing of batteries or products.
Precautions
This symbol indicates that this equipment
may contain dangerous voltage which could
cause electric shock. Do not remove the
cover (or back). No user-serviceable parts
inside. Refer servicing to licensed service
personnel.
This symbol indicates that there are
important operating and maintenance
instructions in this User Manual with
this unit.
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Notice :
The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment.

English- 5
Chapter 2 Package Contents
DC-F80
USB cable (USB 2.0)
Quick Installation
Guide

English- 6
Chapter 3 Product Overview
3.1 Overview
3.2 Extension angle
<Note> Please only operate in the extended angles as illustrated.
Improper usage may damage the machine.
Support Arm
Control panel
LED Indicator
Lens/Lamp

English- 7
3.3 Precautions for Operation
<Note>When moving the device, do not grasp the front of the lens or the
body. Please use both hands to hold the bottom of the device.
Handling the device improperly may cause machine malfunction.
3.4 I/O functions Introduction
NO.
Item
Function Descriptions
1.
Power LED Indicator
Display the status of the machine. Please refer
to 3.5 Description of LED indicator
Back
View
Front
View

English- 8
2.
Kensington safety
lock
Lock hole of safety lock
3.
Reset button
Press the button for initialization to reset to
original factory settings
4.
DIP Switch Setting
Adjust the resolution setting. The default is
1920*1080/30 fps
To switch the setting, please refer to Chapter 8
DIP Switch Setting
5.
Mode Switch Button
Switch Modes: HDMI/USB
6.
HDMI output port
Connect to HDMI output signal source
7.
USB Type-B port
The USB Type-B port is for connecting to the
USB port of the computer which provides USB
signal images and power
3.5 Description of LED indicator
Name
Indicator Status
Startup in progress,
initialization
Flickering blue light
In use
Blue Light
In standby mode
No indicator
A startup failure or error has
occurred
Flickering red light
Force to power off
Flickering blue light; no light after powering off

English- 9
3.6 Relative position of the presenter and document
Computer
Projector