Lumens VC-TA50 User manual

4.1 Please adjust the resolution on SWITCH prior to installation.
(Please refer to )
4.2 Fix base plate A to the camera with 4x silver colored M3 screws.
2. SWITCH Settings
Base plate A
4. Ceiling Installation
1. Connections
Controller
RS-232 Output RS-232/ RS-422 Input
HDMI/ 3G-SDI Output
Kensington
Lock Port
LAN Port
DC Input
Output
Switch
IR
Select
Audio Input
Microphone
Switch/ Router Monitor
2.2 IR SELECT
2.1 OUTPUT SWITCH
ID
Setting
1
2
3
21 3
Output Mode
Setting
1920x1080/60p
1920x1080/50p
1920x1080/30p
1920x1080/25p
1920x1080/60i
1920x1080/50i
1280x720/60p
1280x720/50p
1080/59.94p
1080/59.94i
1080/29.97p
720/59.94p
2
On
Off
1 3 4
2
On
Off
1 3 4
2.3 Camera Address Selector
Setting
Function Descriptions
0~7
ID 0~7
8~9
Reserved
5 6
4 7
3
8
2 9
1 0
2.4 System Switch
Setting
Function Descriptions
DIP 1
RS-232C/RS-422 selector
OFF: RS-232C / ON : RS-422
DIP 2
Infrared signal output switch
OFF: Off / ON : On
DIP 3
Communication baud rate selector
OFF: 9600 / ON : 38400
DIP 4
Reserved
2. SWITCH Settings
Configure IR SELECT to control 3 cameras
using the remote controller
VC-TA50 Quick Installation Guide www.MyLumens.com
5100460-51 AUG. 2022 Copyright © Lumens Digital Optics Inc. All rights reserved.
8m
2.4m
3.1 Use the provided DC 12V power cord or a PoE router or hub to
supply power via a network cable.
* VC-TA50 supports PoE+ (IEEE802.3at)
3.2 Tracking distance range: 4m-15m. Optimal tracking distance 8m.
3.3 Vertical mounting height: 2m-3m, Optimal installation height: 2.4m.
* For best tracking results, avoid placing images of people on posters or screens
behind the subject.
Camera (Serial
connection)
3. Precautions for Installation

User Name: admin
Password: 9999
www.MyLumens.com
Copyright © Lumens Digital Optics Inc. All rights reserved.
192.168.100.150
5.1 Press the remote control to start the auto-tracking function
*Power LED flashes green when the tracking function of the camera is activated
* For advanced tracking, please download the from Lumens websiteVC-TA50 User Manual
Items Button Name Function
1 Auto Tracking Enable/Disable Auto Tracking
2 Full When the presenter’s full body is
framed by the camera
3 Upper When the speaker’s torso is framed
by the camera
4 Switch Force switch to a different presenter
4
3
21
4.3 Screw ceiling plate B to the ceiling
*Caution:
(1) This should be undertaken in accordance with UL
guidelines.
(2) Do not obstruct the cable pass thru hole
4.4 Attach base plate A to the camera base
plate B
▼Push base plate A up to the ceiling and
slide to the right to latch on to plate B.
▼Secure with 2x M3 silver screws and 1x
M3 black screw.
black
screw
5. Start Tracking
6. Webpage Settings
* Please visit YouTube [My Lumens] channel to watch the
related videos for instructions
6.1 Open your web browser and enter the IP address in the address bar.
* If the camera is not connected to a DHCP router, the default IP address is 192.168.100.150
* The IP address can be verified on a connected monitor by clicking [MENU] =>
[Ethernet] => [IP Address] on the remote control
6.2 Enter the user name and password to view the camera images,
control the camera and manage advanced settings.
* After the camera is inverted, press the [Mirror] button on the
remote control to flip the screen [Flip]
Base
plate B