Luxor PS4000 User manual

Luxor PS4000 Gray
Presentation Workstation
with Steel Frame
Instruction Manual

PS4000 Assembly Guide
www.luxorfurn.com
A.
B.
C.
D.
E.
F.
G.
H.
I.
J.
K.
L.
M.
N.
O.
1 x Left Panel
1 x Right Panel
1 x Bottom Panel
1 x Middle Panel
1 x Top Panel
1 x Shelf Panel
1 x Left Shelf Bracket
1 x Right Shelf Bracket
1 x Back Panel
2 x Locking Casters
2 x Casters
16 x Small Screw (M5x15)
8 x Large Screw (M5x48)
1 x Caster Wrench (14mm)
1 x Allan Wrench (4mm)
Part List:
BA
CDEF
GHI J
LMNO
K

Step 1
Install the casters (J,K) to the side panels (A,B).
Using the supplied allan wrench (O), install
the bottom panel (C) with the 4 long screws (M).
Note: Do not completely tighten the screws.
Step 2
Using the allan wrench (O), install the top panel (E)
to the main unit with 4 small screws (L).
Note: Do not completely tighten the screws.
A
C
K
E
L
J
M
B
Centerline of edge
drilled hole
Conrm that the arrowhead
mark on the insert aligns
with the centerline of the
drilled hole.

Step 3
Using the allan wrench (O), install the back panel (I)
to the main unit with 8 small screws (L).
Note: Do not completely tighten the screws.
If you have a cabinet pack, open it now. If not
continue following the instructions.
Step 4
Using the allan wrench (O), install the middle
panel (E) to the main unit with 4 large screws (M).
Note: Do not completely tighten the screws.
L
M
Centerline of edge
drilled hole
Conrm that the arrowhead
mark on the insert aligns
with the centerline of the
drilled hole.
I
D

Step 5
Using the allan wrench (O), install shelf brackets (G,H)
to shelf panel (F) with 4 small screws (L).
Install the shelf at the desired height.
Note: Do not completely tighten the screws.
Step 6
Using the allan wrench (O), tighten all
of the screws (16 small & 8 large).
You have completed the assembly.
L
G
F
H

PS4000 Cabinet Pack Assembly Guide
A.
B.
C.
D.
E.
F.
G.
H.
I.
J.
K.
L.
M.
N.
O.
1 x Lock
1 x Lock Catch
1 x Lock Ring
1 x Left Panel
1 x Right Panel
1 x Door Panel
8 x Wood Dowels
2 x Hinges
1 x Handle
2 x Handle Screws
2 x Washers
20 x Small Screws
1 x Magnetic Catch Plate
1 x magnetic Catch
4 x Large Screws
Part List:
BA
CD E F
GH I
J
K
LMN O
www.luxorfurn.com

Step 1
After following the PS4000 Assembly guide to Step 3,
install 4 dowels (G) into the side panels (D,E).
Insert the side panels into the main unit.
Step 2
Install 4 dowels (G) into the top of the side
panels (C,D). Install the lock Catch (B) to the
middle shelf with 2 small screws (L).
Install the magnetic catch (N) to the side shelf (C)
with 2 small screws (L).
D
E
G
GB
L
N
L
(A)
Detail - (A)
Middle Shelf (D)
Shelf Screws (M)

Step 3
Install the lock (A) and lock ring (C) with the 4 large screws (O).
Install the magnetic catch plate (M) to the door (F) with 2 small screws (L).
Install the handle (K) with the handle screws (I) and washers (J) to the door (F).
With 14 small screws (L), install the hinges (H) to the door (F), and
the side panel (E).
Step 4
Continue with the PS4000 Assembly Guide.
F
K
J
Detail - (B) Detail - C)
(C)
(B)
L
OL
M
A
B
H
I
9620 NE Tanasbourne, Dr. Suite 250, Hillsboro, OR 97124
[email protected] 1-800-944-4573