Luxor Stand Up Crank Flat Top Desk User manual

Stand Up Crank Flat Top Desk Assembly Guide
for 60˝ & 48˝ Wide Desks

2 / 12
Table of Contents ....................................... 2
Parts List & Hardware .................................... 3
Assembly and Installation
Assembly of the right and left frame ......................... 4
Assembly of the cross bars................................ 5
Place crank adjustment housing ............................ 6
Attach crank adjustment housing ........................... 7
Flip desk upright ........................................ 8
Install cable clips and optional electric ....................... 9
Attach the desk surface .................................. 10
Finish assembly and tighten bolts........................... 11
ATTENTION!
Do not fully tighten screws until completely assembled
WE ARE GIVING YOU A STANDING OVATION
You did it! You took the rst step towards healthier living by purchasing
our stand up desk. We couldn’t be happier to have you joining the
millions of people who were tired of sitting around and ready to take a
stand for a healthier life.
This desk was built with you in mind and every detail was carefully
crafted. The following assembly guide is best accomplished with two
people. If you have any questions or concerns give us a call at:
1-800-323-4656 or email at: [e-mail]
Table of Contents

3 / 12
12 x1
10 x1
9 x1
A x1
1 x2 4 x13 x4
D x1
C x2
B x1
2 x2
F x1
E x1
Parts List
Hardware (Actual Size)
8 x16
M8x15
6 x4
M6x48
7 x4
M6x73
5 x2
M6x36
M5
M4

4 / 12
1Assembly of the right and left frame
A
B
1
1
2
2
12
Gather Parts:
A , B , 1 , 2 , 12
Tighten casters
fully with included
wrench

5 / 12
2Assembly of the cross bars
&
A
C
E
4
C
C
B
6
6
6
6
Gather Parts:
C, E, 4 , 10
Make sure the indented center
hole of the cross bars C are
facing towards the casters
Assistance
Recommended
6 x4
M6x48
10
EA
IMPORTANT: Using the crank
handle for minor adjustments, align
the crank adjustment rod so that it
seats fully into both sides of frame.