Luxor L-150 Easel User manual

Step 2
Attach the hinge to the back support leg using two 1/2” screws.Then attach the other part
of the hinge to the top support brace using two 1/2” screws. Now stand unit upright to
attach remaining parts.
Instruction Sheet - L-150 Easel
Customer Service Dept
2245 Delany Rd
Waukegan, IL 60087
Ph: 847/244-1800 • 800/323-4656
Fax: [phone] • 800/327-1698
L-150
Step 1
Lay the left leg, the right leg, and center brace
on the ground with the pre drilled holes facing
up. Then attach the top support brace and bot-
tom support brace using 11/2” wood screws.
Note: You will use all 10 11/2” screws for this
step.
1
RUBBER FEET
RUBBER FEET
HINGE
CENTER BRACE
LEFT LEG
SUPPORT TOP
SUPPORT
BRACE
BOTTOM
SUPPORT
BRACE
RIGHT LEG
SUPPORT
2
PARTS LIST
1-RSupport Leg 1 - L Support Leg 1 - Center Brace
1 - Top support Brace 1 - Bottom Support Brace 1 - Back Support Leg
1 - Leg Adjuster 1 - Tray Bottom 1 - Tray Back
1 - Tray Adjuster Handle 10 - 1 1/2” Screws 4 - 1/2” Screws
1-Pan Head Screw 1 - 1 1/4” Screw 1 - Gold Tube
4-1” Screws 2 - Long Bolts 4 - Washers
2-Wing Nuts 1 - Hinge
BACK SUPPORT LEG

EASEL PADS
Replacement easel pads are available
from your local Luxor dealer.
Luxor easel pads may be used with all
Luxor easels.
P504P Package of 4 easel pads, 50
sheets each.
Step 3
Attach the back leg adjuster to the center brace using a 1 1/4”screw.
Then take the pan head screw and slide the gold tube onto the screw
and attach to the back leg support. Next attach the tray bottom to the
tray back using 1” screws. Finally attach the tray adjuster handle to
tray back using 2-long bolts, 2-wing nuts and 4-washers.
LEG ADJUSTER
TRAY BACK
LEG ADJUSTER
TRAY BOTTOM
TRAY ADJUSTER
HANDLE