Luxor Level Up Corner Pro User manual

LVLUP EPRO CNR
Step 1: Press the up arrow on the button panel to raise the unit.
Step 2: With the help of a second person, place the unit on the intended surface.
Note: Choose two locations
Note: Two people required
Note: Caution with electricity
Step 3: Attach the provided cable clips on the underside of the unit. Place items on the desk
and run cables through the clips. Check cables for slack and pinch points.

IMPORTANT SAFETY INSTRUCTIONS
INCLUDED
Weight capacity - Confirm the intended surface can support the load of the desk (24kg (53lbs))
+ any items that will go onto the desk. The desk is designed to easily raise and lower (13kg (29lbs))
and max weight capacity of 20kg (44lbs).
Assistance - Two people are required during the initial setup or when moving the desk.
Setup - During the initial setup, raise the desk to the tallest setting before placing items on the desk
surface. Check cables for slack. Without slack, items may be pulled off the desk surface.
Desktop items - To prevent items from falling off the desk surface, do not place items near the edges.
Cables - Keep cables clear of the support structure.
Moving locations - If moving the desk to a new location, remove the items from the desk surface.
Inaccessible components - This desk raises and lowers with electronic components. Do not attempt
to open or alter these componets.
Pinch points - Keep hands off and away from the support structure. Pinch points are created
during operation.
Failure to follow these instructions may result in equipment damage or serious personal injury.
Questions or concerns? Contact us directly!
1-800-323-4656
[email protected]
X1 X2
LVLUP EPRO CNR