Magellan MG32LCD User manual

MG32LCD - User Quick Reference Guide
How to Arm (when StayD is OFF)†
ON = Power on
OFF = Power off
AC Light
ON = StayD on
OFF = StayD off
StayD Light
The LCD will guide you
with detailed messages.
Use the arrow keys to
scroll the menu or options.
= Press once + [MASTER
CODE]for Quick Menu
programming
= Press & hold for keypad
settings
= Press & hold for chime
programming
Keys
To Arm When
Leaving...
To Regular Arm:
1. Close all zones in the desired partition.
2. Press [ARM].
3. Enter your [ACCESS CODE].
To Arm
When Staying...
To Stay Arm:
1. Press the [STAY]key.
2. Enter your [ACCESS CODE]*.
To Sleep Arm:
1. Press the [SLEEP]key.
2. Enter your [ACCESS CODE]*.
To Disarm: [OFF] +[ACCESS CODE]*
* Press button(s) corresponding to desired partition(s). For two partitions, press the other key after the
confirmation beep.
†If StayD is ON, refer to the StayD User Card for more information.
MG32LCD_EQ00.fm Page 1 Friday, June 15, 2007 10:48 AM

To send a silent or audible alarm to your security company, press and hold one of
the key combinations listed below for two seconds.
Trouble Display
The screen will display all troubles when they occur.
1. Press the [TBL] key. The trouble(s) will be displayed. Scroll through the
trouble list using the [S] and [T] keys.
2. Read the corresponding explanation of the trouble from the trouble list in
the User Guide. If no repair instructions are given, call your security
company for repairs.
3. Press the [CLEAR]key to exit.
Panic Keys
Panic Alarm Type Key Combinations
Police Keys [1] and [3]
Medical Keys [4] and [6]
Fire Keys [7] and [9]
How to Bypass Zones Alarm Memory Display
Bypassed zones remained unarmed
when the partition is armed.
1. Press the [BYP] key.
2. Enter your [ACCESS CODE].
3. Select the zone(s) you want to
bypass by entering the two-digit
zone number (i.e. zone 3 = 03).
4. Press the [ENTER]key to save
and exit.
To view the alarms that occurred
during the last armed period:
1. Disarm the system.
2. Press the [MEM] key.
3. The zones that were in alarm the
last time the system was armed
will be displayed.
4. Press the [ENTER]key to save
and exit.
paradox.com
Printed in Canada - 06/2007 MG32LCD-EQ00
MG32LCD_EQ00.fm Page 2 Friday, June 15, 2007 10:48 AM