Magiccos FP406 User manual

Quick Start Guide Version 1.0
PREMIUM ALUMINUM DIE-CAST
FP406
FOOD PROCESSOR
Mount The Dicer Attachment
When using the dicer attachment,
you don't need to place the
driving shaft.
Just place the assembled dicer
attachment into the bowl.
3d
Lock The Bowl
Place the bowl onto the motor
base with the handle facing
slightly away from you.
Twirl the bowl clockwise until it
clicks into the "lock" position.
3a
3c3b
When using the double beaters,
place the driving shaft first. Then
place the double beaters onto
the driving shaft.
Mount The Double Beaters
4
Unpack the box and take out
the contents.
Place the motor base on a flat
surface.
When using the chopper blade
or kneading blade, mount the
assembled driving shaft and
blade into the bowl.
Mount The Blade Disc&Holder
When using the blade disc,
place the driving shaft into the
bowl first. Then put the
assembled disc holder and
blade disc together into the bowl.
Place the lid on the top of the
bowl. Find out the triangle
indicator on the lid and line it up
with the "unlock" symbol on the
top of the bowl.
Place The Lid
Twirl the lid clockwise until it
clicks into the "lock" position.
The handle should be facing the
right side of the control panel.
Plug the appliance into a power
point and turn it ON. Turn the
control dial as desired. Feed
ingredients through the feeding
chute.

Installation Tips:
To clean, wash all accessories with warm soapy water. Wipe the base with a moist cloth.
The base is Aluminum die-cast material. Please avoid scratches by hard objects.
Cleaning :
https://magiccos.afterservice.vip
Scan here to get vip service
TEL: [phone]
The bowl should be firmly locked to
activate the safety lock. For a new
machine, it may be a little difficult to
lock the bowl on the motor base and
you may need to use some strength.
Make sure that the handle is facing
to the right at a 90 degree angle.
90°
NEVER try to install the bowl with
handle on the left, it can not be
installed! Please install the bowl
with handle on the right.
The lid should be firmly locked as
the left picture shows to make sure
the safety lock is activated.
For better installation, please place
the lid on the bowl with 30 degree
angle between protruding part of the
lid and the handle. Please follow the
directions of "lock and unlock"
symbols on the lid and bowl to lock
and unlock the lid.
30°
Please notice that the directions of
the "lock and unlock" symbols on
the lid and bowl indicate the
directions of locking and unlocking
the lid.
Please lock and unlock the bowl
according to the "lock and unlock"
symbols on the base.