Magiccos FP408 User manual

Quick Start Guide Version 1.0
5
3
4b4a
6 7 8
PREMIUM STAINLESS STEEL
FP408
FOOD PROCESSOR
Please make sure that you have read the manual before attempting the operation.
Place the bowl onto the motor
base with the handle facing the
right side of the control panel.
Unpack the box and take out
the contents.
Place the motor base on a flat
surface.
Turn clockwise to click the bowl
into the locked position.
When using chopping blade or
kneading blade, mount the
assembled driving shaft and
blade into the bowl.
When using a blade disc, insert
the driving shaft, then put
assembled disc holder and disc
blade together into the bowl.
Place The Lid On The Bowl
Find the "small rectangle" symbol
on the lid, align the symbol with
the "unlock" symbol on the bowl,
and then cover the lid on the bowl.
Turn clockwise to click the lid into
the locked position.
The handle should be facing the
right side of the control panel.
Plug the appliance into a power
supply and turn “ON”. Turn the
rotary switch on the control panel
to select the desired setting.
Feed ingredients through the
feeding chute.

Installation Tips:
https://magiccos.afterservice.vip
Scan here to get vip service
TEL: [phone]
The bowl should be firmly locked to
activate the safety lock. For a new
appliance, it may be a little difficult
to lock the bowl on the motor base,
so you need to use some strength.
Make sure that the handle is facing
to the right at a 90 degree angle.
90°
NEVER try to install the bowl with
handle on the left, it can not be
installed! Please install the bowl
with handle on the right.
The lid should be firmly locked as
the left picture shows to make sure
the safety lock is activated.
For better installation, please place
the lid on the bowl with 30 degree
angle between the buckle and the
handle. Please follow the symbols
on the lid and bowl to lock and
unlock the lid.
30°
Please notice the "lock"and "unlock"
symbols and directions on the bowl.
Please lock and unlock the bowl
according to the lock and unlock
symbols on the base.
Please notice all the blades can be
stored inside the drawer.
Operation Tips:
Please always make sure the buckle
(safety lock) is locked before using.
You can use the small pusher alone
or the small and big pusher together
as an assembly. Please mind the
"lock"and "unlock" symbols on the
small pusher.
LOCKED