Magiccos FP406 User manual

INSTRUCTION MANUAL
FP406 DIE-CAST ALUMINUM FOOD PROCESSOR
Version 1.0

TECHNICAL SPECIFICATION
Model: FP406
Voltage: 120V~60HZ
Max power: 1000W
Processing bowl capacity: 3.5L (2.0 L rated )
SAFETY PRECAUTION
When using electrical appliances, basic safety precaution must always be followed:
1. Carefully read all instructions before operating and save for future reference.
2. This appliance is for normal household use only.
3. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety.
4. Young children must be supervised to ensure that they do not play with the appliance.
5. If the supply cord is damaged,in order to avoid a hazard, it must be replaced by the
manufacturer, service agent or similarly qualified persons before further use .
6. This appliance includes a safety switch which prevents operation unless the accessories
are securely installed.
7. The temperature of accessible surfaces may be high when the appliance is operating.
8. If operation is not finished within 2 minutes, turn off the machine and let it cool for 1
minute before the next round of operation. If more than 5 rounds of operation are
required, cool the machine for 30-60 minutes to room temperature . This can lengthen

lifespan of the appliance.
9. To protect against risk of electric shock, fire or personal injury, do not immerse power
cord, plug or motor base in water or any form of liquid.
10. Unplug when it is not in use and before cleaning.
11. Do not immerse Motor Base in water, neither rinse it under tap water.
12. Do not push food with fingers, or other objects (like knives), always use the enclosed
pusher for feeding food.
13. Be extremely careful when handling blades and inserts, especially while assembling and
disassembling, and cleaning after use. Blades are very sharp.
14. Do not let power cord hang over the edge of a table or counter, or touch any hot surface
15. Do not place the appliance near a gas outlet, electric burner, or heated oven.
16. Please wait till all the components stop running before unplugging the power cord and
taking off the processing bowl.
17. Ensure the capacities shown in the Specifications section are not exceeded.
18. Always use a reliable earthed power supply to operate the appliance.
19. The appliances are not intended to be operated by means of an external timer or
separate remote-control system.

PACKAGE CONTENTS
1Motor base
2Processing bowl
3Driving shaft
4Disc holder
5Bowl cover
6Pusher
7Dicer gearbox
8Dicer holder
9Buckle
10 Dicer dicing blade
11 Dicer cutting blade
12 Dicer protective cover
13 Dicer pusher
14 Double beaters / egg whisk
15 Dough blade
16 Chopper blade
17 Blade protectors
18 Slicing blade ( fine & coarse)
19 Shredding blade disc ( fine &
coarse)
20 Mashing blade disc
21 Spatula

Installation
1. Position the motor base①on the flat and dry board.
2. Position the processing bowl②onto motor base, please notice that the handle of the bowl
should be on the right of the control panel, turn clockwise to make it fixed firmly.
3. Take the blade you want.
When using the chopper blade⑯or dough blade⑮, just seat it in driving shaft③and
fix the driving shaft and blade together, then put them together on to the
processing bowl ②.
When using slicing, shredding or mashing blade discs, please fix it on blade disc
holder④first, then seat the blade disc(⑱,⑲,⑳) and blade disc holder ④together in
driving shaft③, then put them together on to the processing bowl ②.
When using dicer attachment (⑦⑧⑨⑩⑪), no need to seat on the driving shaft③,
directly seat the dicer attachment (⑦⑧⑨⑩⑪) attachment on the bowl.
Attention: only one blade can be used every time.
4. Put the food into the processing bowl②and then close the bowl cover⑤while using the
chopper blade⑯or dough blade⑮. When using slicing, shredding or mashing blades, make
sure to lock the bowl cover⑤first, ingredient should be filled through feed chute after the
machine is ready.
5. Lock the bowl cover ⑤,the safety lock is active now.
6. Be attention: the switch should in the “0”speed; connect the plug with socket, using pulse
function to confirm whether the machine is assembled well. If there is anything abnormal,
unplug the machine and re-assemble it as above.
Please check how to install our machine from our Magiccos Amazon page

FEATURES
NOTE: This appliance is equipped with a double safety lock system, which can protect your
safety while using the appliance, there are 2 safety locks on the bowl and base, the appliance
can not be used while the bowl is not safety installed and the bowl cover is not firmly locked.
Please make sure the cover and bowl are firmly locked to activate the locks.
This appliance is equipped with a overheating protection device. If the temperature becomes
too high, the unit will turn off automatically and resume operation after the motor has
cooled down sufficiently( need 30-60 minutes ), plug again to wake up the machine.
We suggest to use the appliance 2 minutes per time, no more than 3 minutes per time to
keep a longer lifetime of the appliance,over 5 minutes per time may trigger over-heating
protection, if already triggered the over-heating protection, please cool down the machine,
Plug again to wake up the machine.
INSTALLATION AND USING
- chopper blade⑯

Note : Always install chopper blade and driving shaft together before placing into the bowl.
Standard processing time is 30sec to 1 minute, the volume per one batch refer to the
following table :
In g r e d i e nt
Vo l u m e
C ho c o l a te
≤2 0 0 g
C he e s e
≤3 5 0 g
Me a t
≤8 0 0 g
Ve g e t a b l e & S p i c e
1 0 0 ~ 1 5 0 g
F r u i t
3 0 0 ~ 5 0 0 g
O ni o n
≤8 0 0 g
- Dough blade⑮
Note : Always install dough blade and driving shaft together before placing into the bowl.

Standard processing time is 20sec to 30sec, the volume per one batch refer to the following
table :
Ingredie nt
Vo l ume
Flo u r&soft che e s e
≤800g
egg
≤10 pc s
Tips and warning:
The ratio of flour to water while doughing is 1:0.6, means 100g flour need 60g water to
make best effect; The standard of processing time is within 30sec, that’s because the flour
will become sticky and stick to the blade adapter if the time lasts too long. Then it will make
the machine shake, and work abnormally.
- Disc for shredding, slicing ⑱,⑲

Note : Please refer to above FIG for installation, always place the driving shaft first then
place the disc and disc holder combination together before placing into the bowl.
Standard processing time is 1 minute.
Choose the blade disc according to ingredients and the shape you want. Put the blade disc
you choose into the plastic disc holder(4), then seat it in the driving shaft(3), close the
processing bowl cover(5), making sure the safety switch is switched on.
DO NOT be violent while pushing the ingredients into feed chute by pusher. It’s better to
chop large shape ingredient into smaller one to fit the feed chute size.
Lower speed is recommended while slicing soft ingredient to prevent it from pasty.
- Disc for mashing ⑳
Standard processing time is 1 minute.
Follow the same procedure for installing shredding & slicing disc. Mashing disc is used for
softer ingredients, such as garlic, ginger etc. Insert garlic, or ginger into the feeding chute
and switch on the machine, then use pusher to press ingredients downward.

- Double beaters / egg whisk ⑭
The assembly of the egg whisk is as shown above.
The volume per batch for egg whisk, please refer to the following table:
Ingredient
Volume per one batch
Process time
Egg
2~10pcs
30~70 sec.
Cream
200~550ml
30~60 sec.
Egg white
3~5pcs
180~240 sec
Aware that switch should be in “0” speed, plug in and use pulse 2-3 times as pre-mixing.
Then choose “2” speed for processing.
Notes :
Egg whisk can be used to mix cheese and egg, to make mayonnaise and pudding rapidly.
Do not use egg whisk to knead flour or deal any ingredient containing butter.

- Dicer attachment and pusher ⑦⑧⑨⑩⑪⑫⑬
Note : please remove the dicer protective cover⑫before using, always lock the 4 buckles
firmly before using, the dicer assembly should be used together.
Dicer attachment is for cutting food into cube shape, such as potatoes, carrots, onions,
cheese, apples and kiwi fruit, the cube size is around 8*8mm
Assembling the dicer
-Insert the dicer dicing blade⑩into the dicer holder assembly ⑦⑧⑨ , make sure sharp blade
is up position, and don’t push sharp blade by fingers
- Seat the dicer cutting blade⑪on the center gear of the dicer holder assembly ⑦⑧⑨.
-Press up the 4 buckles until they lock into position.
You must place the dicer cutting blade as below position, the dicer dicing blade should be on
the right side and the bowl handle should be facing the middle of the dicer dicing blade :
Working with the dicer attachment

-Fix the bowl onto the motor base.
-Insert the dicer attachment into the food processing bowl and lock the bowl cover. Make
sure the dicer dicing blade and the feeding chute is in the same vertical line, or else it is hard
to place the dicer so perfect.
-Insert the power plug, and select the speed required.
-Insert food into the feeding chute. If required, apply light pressure to the food pusher; if
required, chop up food before insert.
Empty the bowl before the cubes have reached to the lower edge of the dicer attachment.
Note:
-you must be careful when take out or assemble the sharp slice/dice blade.
-While processing different foods, the dicer dicing blade must be cleaned occasionally.
- Please use dicer pusher to push out residue if you can not get all the food out.
WARNING
- Be extremely careful when handling blades and inserts, especially while assembling and
disassembling, and cleaning after use. Blades are very sharp.

- Cleaning the chopper and keep it in the blade protector⑭, make sure the blade is not
exposed, to avoid cutting for next time using.
- Spatula is for scraping and cleaning the processing bowl after the appliance stop operating.
Do not put the spatula into the feeding hole to stir the food while the appliance is operating,
it could be dangerous.
Cleaning & Maintenance
1. Please unplug the power cord to protect from electric shock while cleaning the machine,
do not immerse motor base and power cord it in water.
2. All removable accessories can be cleaned in water except motor base, dry the wet parts
after cleaning, the detachable accessories are dishwasher-safe.
3. For easy cleaning, you can put in some warm water and detergent and let it run for a
while when cleaning blender jar (Blender jar is an optional accessory, if you need one
please contact Magiccos service).
4. Always place the machine in dry and flow place.
5. DO NOT use hard(solid) detergent to avoid scratch on product.
6. Do NOT operate the appliance for more than 3 minutes at a stretch, a stretch more then 5
minutes operation may trigger over-heating protection of the motor, please do not
operate too long a stretch too avoid damage to the appliance.
7.If operation is not finished within 2 minutes, turn off the machine and let it cool for 1
minute before the next round of operation. If more than 5 rounds of operation are
required, cool the machine for 30-60 minutes to room temperature . This can lengthen
lifespan of the appliance.

TROUBLE SHOOTING
Please check our manual and guide page carefully, if you cannot find the required answer
please contact magiccos service or check the demo video from our Amazon page.
Problem
Solution
Machine doesn’t work.
Ensure correct assembly, please pay attention to the lock and
unlock direction, arrows and marks on the cover and base.
NEVER try to install the bowl with handle on the left, it cannot be
installed! Please install the bowl with handle on the right.
Double safety locks are on the lid and base, make sure the safety
locks are activated, if they are not activated, the motor won’t
start until you can lock the lid and base firmly.
The bowl should be firmly locked to activate the safety locks, a
new machine could be a little tight to lock the bowl till the end,
you may need a stronger push and make sure the handle with a
90-degree angle facing to the right side, if not please try a
clockwise click one more time.
Make sure power plug is plugged in properly.
Check if the mains have tripped, or if there is a power outage.
Machine stops running
suddenly.
Processing bowl may loosen during vigorous processing. Please
re-install the bowl cover.
There is an over-heating protection function inside the machine,
long time operation will reduce the life of the food processor may
trigger the over-heating protection, we suggest you to use the
machine 2 minutes per time, no more than 3 minutes per time to
keep a longer lifetime of the machine, over 5 minutes per time
may trigger over-heating protection, if already triggered the over-
heating protection, please cool down the machine, Plug again to
wake up the machine.

Motor is running, while
components do not
run.
Make sure the driving shaft is installed correctly.
Difficult to install the
blade and diving shaft
Carefully Install the blade over the driving shaft. Ensure that the
UP marking (found on the black center plastic circle of the blade
set) is facing upwards when fitting the blade on to the driving
shaft. You may need to slightly rotate the blade to allow it to align
with the grooves found on the driving shaft. Once aligned the
blade will lower down to the base of the driving shaft, almost
touching the bottom of the food processor bowl.
Machine shakes
violently
Please put lesser food or else the machine may loose balance.
Please chop food into smaller pieces and put evenly in the bowl.
Please install the blades as manual, the blades must be firmly
installed.
Please put the machine in a flat smooth place , the sucker feet
can help to keep the balance of the machine.
Missing some parts
Please call us or email us, we can guide or provide replacement.

Afte r Sal e s S up p or t
Co n ta ct us : s u pp o rt @ m ag i c co s. c o