Magiccos FP415 User manual

Instruction Manual
FP415 Stainless Steel Food Processor

IMPORTANT SAFETY INSTRUCTION
When using electrical appliances, basic safety precaution must always be followed:
1. Carefully read all instructions before operating and save for future reference.
2. This appliance is for normal household use only.
3. This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the appliance by a person
responsible for their safety.
4. Young children must be supervised to ensure that they do not play with the appliance.
5. If the supply cord is damaged, it must be replaced before further use by the manufacturer,
its service agent or similarly qualified persons in order to avoid a hazard.
6. This appliance includes a safety switch which prevents operation unless the accessories are
securely installed.
7. This appliance incorporates a protective device against high temperatures. If the
temperature becomes too high, the unit will turn off automatically and will resume
operation when the motor has cooled sufficiently (after about 15 minutes).
8. Do NOT operate the appliance for more than a minute at a stretch.
9. If operation is not finished within 1 minute, turn off the machine and let it cool for 10 minutes
before the next round of operation. If more than 5 rounds of operation are required, cool
the machine for 90 minutes to room temperature before the next 5 rounds. This can
lengthen lifespan of the machine.
10. The temperature of accessible surfaces may be high when the appliance is operating.
11. To protect against risk of electric shock, fire or personal injury, do not immerse power cord,
plug or motor base in water or any form of liquid.
12. Unplug when it is not in use and before cleaning.
13. Do not immerse Motor Base in water, neither rinse it under tap water.
14. Do not push food with fingers, or other objects (like knives), always use the enclosed pusher
for feeding food.
15. Be extremely careful when handling blades and inserts, especially while assembling and
disassembling, and cleaning after use. Blades are very sharp.
16. Do not let power cord hang over the edge of a table or counter, or touch any hot surface
17. Do not place the appliance near a gas outlet, electric burner, or heated oven.
18. Please wait till all the components stop running before unplugging the power cord and
taking off the processing bowl.
19. Ensure the capacities shown in the Specifications section are not exceeded.
20. Always use a reliable earthed power supply to operate the appliance.
21. The appliances are not intended to be operated by means of an external timer or
separate remote-control system.

SPECIFICATIONS
Model: FP415
Voltage: 120V /60Hz
Rated power: 750W
Processing bowl capacity (Max.): 2000 ml
Processing bowl capacity (Liquid): 1200 ml
OVERVIEW
1. Switch knob
2. Motor Base
3. Food Processor bowl
4. Bowl Cover
5. Pusher
6. Driver
7. Blade Adapter
8. Emulsifying disc
9. Chopper
blade
10. Chopper blade protector
11. Kneading blade
12. Citrus juicer
13. Cone
14. Blade Holder
15. Fine grating blade
16. Coarse grating
blade
17. Slicing Blade

BEFORE FIRST USE
After unpacking, disassemble unit before using first time. Refer to “HOW TO DISASSEMBLE” for
directions.
Wash all parts except motor base in warm, soapy water. Rinse and dry immediately. DO NOT
IMMERSE MOTOR BASE IN WATER.
ASSEMBLY
Fig1 for chopper blade / kneading blade / emulsifying disc

Chopper Blade Assembly(Refer to Fig1)
1. Position Driver on motor base.
2. Position processing bowl into the Driver and turn clockwise to seat firmly on motor base.
3. Place blade adaptor onto the Driver.
4. Place chopper blade onto the blade adaptor.
5. Turn the chopper blade to the right position, then put food into the bowl
6. Place cover on bowl, turn clockwise until cover interlocks on bowl.
7. Place pusher into feeding chute
Processed Food
Measurement Per batch
Chocolate
≤100g
Cheese
≤200g
meat
≤500g
Tea or Spice
50~100g
Fruit & Vegetable
100~300g
Onion
≤500g
Notes :
- Always keep the chopper blade inside the bowl before feeding food.
- Use pulse function for several times to avoid cutting too fine. Do not run for too long while
cutting hard cheese or chocolate. Otherwise these materials will overheat and begin to
melt.
- Standard chopping period: 30-60 sec.

Kneading Blade Assembly (Refer to Fig1)
1. Position Driver on motor base.
2. Position processing bowl into the Driver and turn clockwise to seat firmly on motor base.
3. Place blade adaptor onto the Driver.
4. Place kneading blade onto the blade adaptor.
5. Turn the kneading blade to the right position and then put the flour into the bowl
6. Place cover on bowl, turn clockwise until cover interlocks on bowl.
7. Place pusher into feeding chute
Processed Food
Measurement per
batch
Flour / Soft Cheese
≤300g
Egg
≤5pieces
Notes (Kneading Disc):
- Always attach kneading disc in the bowl before feeding food.
- Standard kneading period: 30-180 sec.
Emulsifying Disc Assembly (Refer to Fig1)
1. Position Driver on motor base.
2. Position processing bowl into the Driver and turn clockwise to seat firmly on motor base.
3. Place blade adaptor onto the Driver.
4. Place Emulsifying disc onto the blade adaptor.
5. Turn the Emulsifying disc to the right position and put food into the bowl.
6. Place cover on bowl, turn clockwise until cover locks on bowl.
7. Place pusher into feeding chute
Processed Food
Measurement
per batch
Time per
batch
Egg
2~5pcs
30~70sec
Cheese
125~350ml
20sec
Notes (Emulsifying Disc):
Emulsifying Disc can be used to mix cheese and egg, to make mayonnaise and pudding
rapidly.
Do not use Emulsifying Disc to knead flour.

Fig2. For Slicing blade, coarse graing blade and fine grating blade
Slicing blade, coarse grating blade, fine grating blade Assembly (Refer to Fig2)
1. Position Driver on motor base.
2. Position processing bowl into the Driver and turn clockwise to seat firmly on motor base.
3. Install desired blade onto the blade holder.
4. Place blade holder onto the Driver.
5. Place cover on bowl, turn cover clockwise until cover interlocks on bowl.
6. Put food into the feeding chute.
7. Use pusher to push the food down for processing.

Notes:
Choose desired disc according to the processed food and desired shape of food.
Push softly when feeding food.
Pre-cutting food into smaller pieces according to the diameter of feeding tube.
Feed gradually for better effect. When cutting soft food, choose lower speed to avoid the
food turning soupy. If large quantity food needs to be cut, please cut it for several batches.
1200ml for one batch.
Fig3 （For citrus juicer）
Citrus juicer attachment Assembly (Refer to Fig3)
1. Position Driver on motor base.
2. Position processing bowl into the Driver and turn clockwise to seat firmly on motor base.
3. Place the citrus juicer on the bowl, turn citrus juicer clockwise until it is locked firmly.
4. Place the cone on the citrus juicer
5. Hold citrus firmly and push the cone for juicing
Note : For citrus juicer fucnction please choose slow speed (speed 1).

HOW TO DISASSEMBLE
1. Remove pusher. Turn cover counterclockwise, lift and remove.
2. Lift blade holder from driver.
3. Lift blade and remove from blade holder.
4. Turn bowl counterclockwise to unlock from motor base. Lift and remove.
CLEANING
Wash all parts except motor base in warm, soapy water. The discs can be disassembled to
wash with water, but be careful during disassembly.
DO NOT IMMERSE MOTOR BASE IN WATER.
TROUBLE SHOOTING
Problem
Solution
Machine does not work.
Ensure correct assembly.
Make sure power plug is plugged in
properly.
Check if the mains have tripped, or
if there is a power outage.
Machine stops running suddenly.
Processing bowl may loosen during
vigorous processing. Please re-install
the bowl cover.
Motor is running, while components do
not run.
Make sure the driver is installed
correctly.
After S a les Supp o r t
Cont ac t u s : s u p port@magic c o s . c o