Installation Tips:
The bowl should be firmly locked to
activate the safety lock, a new
machine could be a little tight to lock
the bowl till the end, you may need a
stronger push and make sure the
handle with a 90 degree angle
facing to the right side.
90°
NEVER try to install the bowl with
handle on the left, it can not be
installed ! Please install the bowl
with handle on the right.
The lid should be 100% closed
according to left picture to make
sure the safety lock is activated.
For better installation, please place
the lid on the bowl with 30 degree
angle between the lid and handle,
lock and unlock directions are the
same as the symbols on the lid.
30°
Please notice the lock and unlock
directions are the same arrows and
symbols on the bowl and lid.
Please lock and unlock the bowl
according to the lock and unlock
symbols on the base.
Please notice there are 6 touch buttons, you need to use finger (skin)
to touch the buttons, you can touch and use the buttons according
to the manual or the brief guide info on the base.
Use Tips:
https://magiccos.afterservice.vip
Scan here to get vip service
TEL:+1 (833) 306 1883
