Magnavox MMA3679 User manual

MODEL: MMA3679
PLEASE READ BEFORE OPERATING THIS EQUIPMENT.
OWNER'S MANUAL
STEREO SPEAKER
with Color Changing Lights and
Bluetooth®Wireless Technology
Size: 148.5(W) x 210(H)mm (A5)

LIMITED WARRANTY
1
FCC NOTICE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation. The antenna(s) used for this
transmitter must be installed to provide a separation distance of at least
20 cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter.
FCC WARNING:
To assure continued operation, follow the attached installation instructions and
use only shield cables when connecting to other devices. Changes or
modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.

LOCATION OF CONTROLS
2
1. POWER Switch
2. DC IN (Micro USB) Port (For charging only)
3. Charging Indicator
4. INDICATORS
5. AUX IN (LINE IN) Jack
6. TREBLE Control Knob
1 2
3
4 5 6
VOLUME

LOCATION OF CONTROL
3
7. BASS Control Knob
8. VOLUME Control Knob
9. (Skip Forward) Button
10. (Skip Backward) Button
11. (Play/Pause) Button
12. MODE Button
78
9
10 11
12
VOLUME
13. Speakers
13

POWER SOURCE
The unit has a built-in Li-ion rechargeable battery, recharge it before rst time use or when it
is drained as follows:
1. Connect the Mirco USB plug from the supplied USB Connection Cable to the DC IN (Micro USB)
Port on the top of unit.
2. Connect the full size USB Plug from the supplied USB Connection Cable to the USB Port on
the Personal Computer or USB Charger (Personal Computer and USB Charger not included).
3. When charging, the Charging Indicator on the top of unit will illuminate.
When charging is complete, it will turn o.
4. During charging, you can also play and listening music at the same time.
NOTES:
Your battery will last longer if you're following these simple guidelines for caring and storing:
A. Before rst time use, charge it approximately 4 hours until the unit is fully charged.
B. Recharge and store the unit within the temperature range of 5°C~35°C (40°F~95°F).
C. Do not charge longer than 24 hours. Excessive charging or running the unit until battery fully
drains will damage battery. Battery life will be extended if you keep the battery fully charged.
D. Battery life naturally shortens slowly over time.
E. The rechargeable battery incorporated in this product is not user replaceable.
PC
Main Unit
USB Connection Cable
To USB Port on PC or USB Charger
To DC IN (Micro USB) Port
on the top of unit
4

5
OPERATION:
BT (BLUETOOTH):
For first time use or re-pairing the unit to a new BT Device, follow instructions below:
1. Slide the POWER Switch on the top of unit to “ON” (or “ON + LIGHTS”) position to power on the
unit (and decorative LED lights), the Blue Indicator on the top of unit will illuminate and blink.
2. Power on the external BT Device and enter to BT searching mode. Start pairing following the on
screen instructions from the external BT Device. When paired, the Blue Indicator light will stop
blinking.
3. If pairing is complete you may now play music with your external BT Device.
4. During playback:
Notes:
When the external BT Device searches for the unit, our model number “MMA3679” will appear
on the display of external BT Device.
If while pairing you are asked for a code please try "0000" or "1234".
Normal operation after paired:
1. Power on the external BT Device and enter to BT mode.
2. Slide the POWER Switch on the top of unit to “ON” (or “ON + LIGHTS”) position to power
on the unit (and decorative LED lights), the Blue Indicator on the top of unit will illuminate
and blink.
3. Wait a few seconds until the unit automatically pair to the BT Device, the Blue Indicator will
stop blinking.
4. If pairing is complete you may now play music with your external BT Device.
Turn the VOLUME Control Knob on the front of unit to adjust volume level as desired
Turn the BASS Control Knob on the front of unit to adjust bass (low audio frequency) level
as desired.
Turn the TREBLE Control Knob on the top of unit to adjust treble (high audio frequency) level
as desired.
Press the Button to pause, press again to resume normal playback.
Press the or buttons repeatedly to skip tracks.
5. When nished listening, slide the POWER Switch to “OFF” position to shut o the unit.

6
Listening from the external Audio Player such like MP3 Player, Discman…etc.
1. Connect one end of the supplied Audio Connection Cable to the AUX Out/Line Out/Phone
Jack on the external Audio Player.
2. Connect the other end of the cable to the AUX IN (LINE IN) Jack on the top of unit as illustrated
below:
AUX IN (LINE IN):
3. Slide the POWER Switch on the top of unit to “ON” (or “ON + LIGHTS”) position to power on the
unit (and decorative LED lights), the Blue Indicator on the top of unit will illuminate and blink.
4. Press the MODE Button on the front of unit to switch to AUX IN (LINE IN) mode. The color of the
Blue Indicator will turn to Green. (To turn back to BT mode, press the button again. The color of the
indicator will turn to Blue and blink.)
5. Play the music on the connected Player as usual. (Make sure the volume level of the connected
Audio Player is turned to high level.)
6. During playback:
Turn the VOLUME Control Knob on the front of unit to adjust volume level as desired.
Turn the BASS Control Knob on the front of unit to adjust bass (low audio frequency) level
as desired.
Turn the TREBLE Control Knob on the top of unit to adjust treble (high audio frequency) level
as desired Green.
7. When nished listening, slide the POWER Switch to “OFF” position to turn o the unit.
TO AUX OUT/LINE OUT/
PHONE JACK ON THE
EXTERNAL AUDIO PLAYER

TROUBLE SHOOTING GUIDE
7
Check the following before requesting service:
Power Source: Built in DC 3.7V, 1200mAh (4.44WH) Li-ion rechargeable
Battery, recharge by DC 5V through the DC IN (Micro USB) Port
Impeadance of speakers: 5W / 2Ω per Channel
Audio Power: 3W per Channel (Total 6W, RMS)
BT Version: 4.1
BT Operation Distance:
</= 32 Feet in open area
.................................
................................
GENERAL SPECIFICATIONS
1 x Owner's Manual
1 x USB Connection Cable (For charging only)
1 x Audio Connection Cables with 3.5mm Plugs
SPECIFICATIONS AND ACCESSORIES ARE SUBJECT TO CHANGE WITHOUT NOTICE
PACKAGE INCLUDES
....................
SYMPTOM
POSSIBLE CAUSE
POSSIBLE SOLUTION
Can’t power
on
Built-in baery drained
Recharge the baery as
page 4
No sound or
sound weak
Volume of the unit was set to
minimum posion
Increase the volume level by
turn the VOLUME Control
Knob clockwise
Volume level of paired/connected
device is in low level
Rise the volume level of the
paired/connected device
Sound
distor�on
Volume level too high Reduce the volume level by
turn the VOLUME Control
Knob counterclockwise
Bass level too high Reduce the bass volume level
by turn the BASS Control Knob
counterclockwise
Volume (or bass) level of the
paired/connected device too high
Reduce the volume (or bass)
level of the paired/connected
device
BT not
func�oning
The external BT device had NOT
paired to the unit
Pair the external BT device to
the unit as page 5
The external BT device too far from
the unit
Place the external BT device
close to the unit
....................................
.......................