Makita DFJ216 User manual

INSTRUCTION MANUAL
Cordless Fan Jacket
DFJ216
DFJ416
ENGLISH: Original instructions
Read before use.

2ENGLISH
WARNING
This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental capa-
bilities or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance in a safe
way and understand the hazards involved. Children shall not play
with the appliance. Cleaning and user maintenance shall not be
made by children without supervision.
SPECIFICATIONS
Model: DFJ216 DFJ416
Material Outer Polyester 100%
Lining -Polyester 100%
Pocket Polyester 100%
Shoulder pad -Nylon 100%
Specications for the fan unit
USB power supply port
(optional accessory)
DC 5V, 2.1A, Type A
Rated voltage DC 10.8 V - 12V max
DC 14.4 V
DC 18 V
Battery cartridge 10.8 V - 12V max BL1015 / BL1016 / BL1020B / BL1021B / BL1040B / BL1041B
14.4 V BL1415N / BL1430 / BL1430B / BL1440 / BL1450 / BL1460B
18 V BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /
BL1840B / BL1850 / BL1850B / BL1860B
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsandbatterycartridgemaydi󰀨erfromcountrytocountry.
WARNING: Only use the battery cartridges listed above. Use of any other battery cartridges may cause
injuryand/orre.
Operating time
Air speed Battery
BL1040B
BL1041B
BL1460B BL1860B
HIGH 5.0 hours 8.5 hours 13.5 hours
MEDIUM 9.0 hours 16.0 hours 24.5 hours
LOW 13.0 hours 21.0 hours 33.0 hours
• Theoperatingtimesintheabovetablearearoughguideline.Theymaydi󰀨erfromactualoperatingtimes.
• Operatingtimesmaydi󰀨erdependingonbatterytype,chargingstatus,andusagecondition.

3ENGLISH
Symbols
Some of the following symbols are used for the product.
Be sure to understand their meaning before use.
Read the instruction manual.
Machine wash at below 30°C on the gentle
cycle.
Machine wash at below 40°C on the gentle
cycle.
Machine wash in domestic or commercial
machines on the gentle cycle.
Do not bleach.
Line dry in the shade.
Do not wring.
Iron at low temperatures (not exceeding
110°C).
Iron at medium temperatures (not exceed-
ing 150°C).
Do not iron.
Do not dry clean.
Do not tumble dry.
Ni-MH
Li-ion
Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material! In observance of the
European Directives, on Waste Electric
and Electronic Equipment and Batteries
and Accumulators and Waste Batteries and
Accumulators and their implementation
in accordance with national laws, electric
equipment and batteries and battery
pack(s) that have reached the end of
their life must be collected separately and
returned to an environmentally compatible
recycling facility.
Intended use
Thefanjacketisintendedforcoolingyourbody
temperature.
SAFETY WARNINGS
WARNING: Read all safety warnings and
all instructions. Failure to follow the warnings and
instructionsmayresultinelectricshock,reand/or
seriousinjury.
Save all warnings and instruc-
tions for future reference.
1. Never use the fan jacket when temperature
reach more than 50°C (122°F). Also avoid use
in high humidity. Doing so may cause burns.
2. Do not wear the jacket over bare skin.
3. Do not use the jacket while you are under the
inuence of drugs, alcohol or medication.
4.
Do not sleep while wearing the fan jacket. A steep
decline of body temperature may harm your health.
5. Children, handicapped persons, or anyone
who is insensitive to temperature, for example,
someone with poor blood circulation, should
refrain from using the jacket.
6. This appliance is not intended for medical use
in hospitals.
7. Do not use the jacket other than for its
intended purpose.
8. If you sense anything unusual, switch o󰀨
the jacket and remove the battery holder
immediately.
9. If any abnormality is found, contact your local
service center for repair.
10. Do not stamp on, throw or otherwise abuse the
fan jacket.
11. Do not put your nger or a foreign object into
the fan unit.
12. Do not blow compressed air toward the fan. Do
not put small sticks into the fan unit. Doing so
may damage the fan and motor.
13. Do not turn on the fan jacket unless you are
wearing it.
14. Do not use the fan jacket in places where a re
or spark could be generated. The fan unit may
catchreorsparkandcauseareorburns.
15. Choose the appropriate fan speed in accor-
dance with the usage environment for continu-
ous use.
16. Do not wear any clothing over the fan jacket.
17. Keep the nameplate on the fan unit. If it
becomes unreadable or goes missing, contact
your local service center for repair.
18. Before washing, detach the fan unit and bat-
tery holder, remove the battery cartridge. Wash
the jacket part only.
19. Do not leave the fan jacket in a place subject
to high heat, such as a car sitting in the sun.
Doing so may cause plastic parts to melt and
become damaged.
20. For long time storage, remove the battery
holder and battery cartridge from the jacket,
and remove the battery cartridge from the
battery holder.
21. When storing, keep the fan jacket, fan units,
battery holder, and battery cartridge out of
reach of children.
22.
Do not use the fan jacket when performing
welding operation or operations using a
grinder.Sparkenteringthefanunitmaycausere.
23. Keep your hair and clothing away from the fan
unit. They can be caught in moving parts of the
fan unit.

4ENGLISH
Electrical safety
1. Do not expose the jacket to rain or wet condi-
tions. Keep water away from electrical parts.
Waterenteringthejacketmayincreasetheriskof
an electric shock.
2. Do not handle the cord and battery with wet or
greasy hands.
3. Do not use the fan jacket when the cord or
plug is damaged.
4. Do not abuse the cord. Do not use the cord
for carrying, pulling or unplugging the jacket.
Keep the cord away from heat, oil, and sharp
edges.
5. Do not leave any cord disconnected while the
battery power is supplied. Small children may
puttheliveplugintheirmouthandcauseinjury.
6. Do not use the supplied cord with appliances
other than the fan unit.
7. Do not insert nails, wires, or other items. into
the USB power supply port. Doing so may cause
shortcircuit,whichcancausesmokeorare.
8. Do not connect the power source to the
USB port. The USB port is only intended for
charging lower voltage devices. Always place
the cover over the USB port when not charging
a lower voltage device. Otherwise there is risk of
re.
9. Recharge only with the charger specied by
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of
re when used with another battery pack.
10. Only use with specically designated batter-
ies. Use of any other battery may create a risk
of injury and re.
11. When battery pack is not in use, keep it away
from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
objects, that can make a connection from one
terminal to another. Shorting the battery termi-
nalstogethermaycauseburnsorare.
12. Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If con-
tact accidentally occurs, ush with water. If
liquid contacts eyes, additionally seek medical
help.Liquidejectedfromthebatterymaycause
irritation or burns.
13. Do not use a battery pack or the fan unit that
is damaged or modied.Damagedormodied
batteries may exhibit unpredictable behaviour
resultinginre,explosionorriskofinjury.
14. Do not expose a battery pack or the fan unit
to re or excessive temperature. Exposure
toreortemperatureabove130°Cmaycause
explosion.
15. Follow all charging instructions and do not
charge the battery pack or the fan unit outside
the temperature range specied in the instruc-
tions. Charging improperly or at temperatures
outsidethespeciedrangemaydamagethe
batteryandincreasetheriskofre.
Important safety instructions for
battery cartridge
1. Before using battery cartridge, read all instruc-
tions and cautionary markings on (1) battery
charger, (2) battery, and (3) product using battery.
2. Do not disassemble battery cartridge.
3. If operating time has become excessively
shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
and even an explosion.
4.
If electrolyte gets into your eyes, rinse them out
with clear water and seek medical attention right
away. It may result in loss of your eyesight.
5. Do not short the battery cartridge:
(1) Do not touch the terminals with any con-
ductive material.
(2) Avoid storing battery cartridge in a con-
tainer with other metal objects such as
nails, coins, etc.
(3) Do not expose battery cartridge to water
or rain.
A battery short can cause a large current
ow, overheating, possible burns and even a
breakdown.
6. Do not store the tool and battery cartridge in
locations where the temperature may reach or
exceed 50 °C (122 °F).
7. Do not incinerate the battery cartridge even if
it is severely damaged or is completely worn
out. The battery cartridge can explode in a re.
8. Be careful not to drop or strike battery.
9. Do not use a damaged battery.
10.
The contained lithium-ion batteries are subject to
the Dangerous Goods Legislation requirements.
For commercial transports e.g. by third parties,
forwarding agents, special requirement on pack-
aging and labeling must be observed.
For preparation of the item being shipped, consult-
ing an expert for hazardous material is required.
Please also observe possibly more detailed
national regulations.
Tapeormasko󰀨opencontactsandpackupthe
battery in such a manner that it cannot move
around in the packaging.
11. When disposing the battery cartridge, remove
it from the tool and dispose of it in a safe
place. Follow your local regulations relating to
disposal of battery.
12. Use the batteries only with the products
specied by Makita. Installing the batteries to
non-compliantproductsmayresultinare,exces-
sive heat, explosion, or leak of electrolyte.
13. If the tool is not used for a long period of time,
the battery must be removed from the tool.
SAVE THESE INSTRUCTIONS.
CAUTION: Only use genuine Makita batteries.
Use of non-genuine Makita batteries, or batteries that
have been altered, may result in the battery bursting
causingres,personalinjuryanddamage.Itwill
also void the Makita warranty for the Makita tool and
charger.

5ENGLISH
Tips for maintaining maximum
battery life
1. Charge the battery cartridge before completely dis-
charged. Always stop tool operation and charge the
battery cartridge when you notice less tool power.
2. Never recharge a fully charged battery cartridge.
Overcharging shortens the battery service life.
3. Charge the battery cartridge with room tempera-
ture at 10 °C - 40 °C (50 °F - 104 °F). Let a hot
battery cartridge cool down before charging it.
4. Charge the battery cartridge if you do not use
it for a long period (more than six months).
PARTS DESCRIPTION
Battery holder and fan unit
12
3
4
1Battery holder (10.8 V -
12 V max)
(optional accessory)
2Battery holder (14.4 V
/18 V)
(optional accessory)
3Fan unit 4Power cable
Model DFJ216


1Battery pocket 2Mesh pocket for ice pack -- --

6ENGLISH
Model DFJ416





1Loop for name badge 2Battery pocket 3Detachable sleeve 4Loop for arm badge
5Shoulder pad -- -- --
INSTALLATION
Installing or removing the battery
cartridge
CAUTION: Always switch o󰀨 the device
before installing or removing the battery
cartridge.
CAUTION: Hold the battery holder and the
battery cartridge rmly when installing or remov-
ing the battery cartridge. Failure to hold the battery
holderandthebatterycartridgermlymaycause
them to slip out of your hands and result in damage
to the battery holder and battery cartridge and/or a
personalinjury.
1
2
4
3
►1. Red indicator 2. Button 3. Battery cartridge
4. Battery holder (optional accessory)
To install the battery cartridge, align the tongue on the
battery cartridge with the groove in the housing and slip
it into place. Insert the battery cartridge all the way until
it locks in place with a small click. If you can see the red
indicator on the upper side of the button, it is not locked
completely.
To remove the battery cartridge, slide it from the battery
holder while pressing the button on the front of the
cartridge.
CAUTION: Always install the battery car-
tridge fully until the red indicator cannot be seen.
Otherwise the battery cartridge may accidentally
falloutofthebatteryholder,causinginjurytoyouor
someone around you.
CAUTION: Do not forcibly install the battery
cartridge. If the battery cartridge does not slide in
easily, it is not being inserted correctly.

7ENGLISH
Attaching the battery holder
You can hang the battery holder on your waist belt.
To prevent the battery holder from dropping acciden-
tally, attach a strap using the strap hole and secure it.
18 V / 14.4 V 10.8 V
1
►1. Strap hole
For 18V and 14.4V battery holders
The battery holder has an anti-drop function. When
removing the battery holder from the belt, pull up the
battery holder while pressing the unlock button.
1
►1. Unlock button
Installing or removing the fan unit
1. (For DFJ416 only)
Open the zip fastener before installing or removing the
fan unit.
2. Turn the ring counterclockwise while lifting the
hook on it. Remove the ring when the mark on the ring
aligns with the slot on the fan unit.
1
2
3
5
4
►1. Fan unit 2. Ring 3. Hook 4. Slot 5. Mark
3. Pass the head of the fan unit into the hole on the
jacket.Settheringontothefanunitandturnitclock-
wise until the mark on the ring aligns with the mark
further from the slot.
1
2
3
►1. Mark 2. Ring 3. Fan unit

8ENGLISH
4. Pass the strip through the loop on the fan unit and
fasten the snap button.
1
►1. Strip
5.
Attachtheotherfanunittothejacketinthesameway.
6. Connect the power cable to the fan units. Support
the cable using the cable holder.
For model DFJ216
2
1
►1. Power cable 2. Cable holder
For model DFJ416
1
23
►1. Power cable 2. Hole 3. Cable holder
NOTICE: Always connect the power cable to
both of the fan units. The fan does not operate if the
power cable is connected to one fan unit only.
7. (For DFJ416 only)
Close the zip fastener after installing or removing the
fan unit.
8. Connect the other end of the power cable to the
battery holder.
1
►1. Battery holder
CAUTION: Always use the strip and snap
button to secure the fan unit to the jacket. If the
fanunitfalls,itmaycauseaninjury,ordamagetothe
fan unit.
Follow the installation procedure in reverse when
removing it.
Attaching the lter set
Optional accessory
Theltersetprotectsthefanunitfromdustandpowder.
Werecommendthatyouusetheltersetinadustyor
powdery work place.
Insertthelterattachmentbetweenthejacketandfan
unitasshowninthegure.
1
2 3
4 5
►1. Ring 2.Holeinthejacket3. Filter attachment
4. Fan unit 5. Filter

9ENGLISH
When tightening the ring, stop it at the mark near the
slot on the fan unit. After attaching the fan units, cover
thelterattachmentswithlters.
1
2
►1. Mark 2. Slot
NOTICE: Make sure that the lter fully covers
the lter attachment. For better protection against
dust and powder, tuck the skirt of the lter
between the jacket and lter attachment.
FUNCTIONAL
DESCRIPTION
NOTICE: The fan jacket is e󰀨ective when the
humidity and temperature of intake air are lower
than those of the body surface. The fan jacket
may not be e󰀨ective if the air temperature and/or
humidity are higher than those inside the jacket.
Power button
Toturnonthejacket,pressandholdthepowerbutton
onthebatteryholder(optionalaccessory).Thejacket
starts at high air speed. Each time you tap the power
button, the air speed changes from high to medium,
medium to low, and low to high. The air speed indicator
shows the current air speed.
21
►1. Air speed indicator 2. Power button
Toturno󰀨,pressandholdthepowerbuttonagain.
Indicating the remaining battery
capacity
Only for battery cartridges with the indicator
1
2
►1. Indicator lamps 2. Check button
Press the check button on the battery cartridge to indi-
cate the remaining battery capacity. The indicator lamps
light up for a few seconds.
Indicator lamps Remaining
capacity
Lighted O󰀨 Blinking
75% to 100%
50% to 75%
25% to 50%
0% to 25%
(For 14.4 V and 18 V batteries only)
Charge the
battery.
(For 14.4 V and 18 V batteries only)
The battery
may have
malfunctioned.
NOTE: Depending on the conditions of use and the
ambienttemperature,theindicationmaydi󰀨erslightly
from the actual capacity.
Battery protection system
The device is equipped with a battery protection sys-
tem.Thissystemautomaticallycutso󰀨powertothe
motor to extend battery life.
If the remaining battery capacity is too low, the device
will not operate. When you turn the device on, the motor
will run again, but stops soon. In this situation, remove
and recharge the battery cartridge.

10 ENGLISH
Turbo button
By pressing turbo button on the battery holder, the
jacketworksinturbomodeforquickcooling.Turbo
mode lasts for a minute and then air speed returns to
normal.
1
►1. Turbo button
Air ow
Airowinsidethejacketisshownbelow.
Battery pocket
A pocket is provided for storing the battery holder (with
battery)insidethejacket.Connectthepowercableto
the battery holder, and then put it into the pocket and
fasten the snap buttons.
Mesh pocket
For DFJ216 only
Meshpocketsareprovidedonthebackofthejacketfor
storing ice packs.
1
►1. Mesh pocket
Connecting USB devices
CAUTION: Connect only devices that are
compatible with the USB power supply port. Not
doing so may cause a malfunction of the battery
holder.
NOTICE: Before connecting a USB device to
the battery holder (with the battery), always back
up the data on the USB device. Not doing so may
cause a loss of your data.
The battery holder (with the battery) can work as an
external power supply for USB devices.
Open the cover and connect a USB cable (not included)
to the power supply port of the battery holder. Then con-
nect the other end of the cable to the device and turn on
the switch next to the USB port.
The battery holder (with the battery) supplies DC5V, 2.1A.
1
2
►1. Cover 2. Switch
NOTE: The battery holder may not supply power to
some USB devices.
NOTE: When not using or after charging, remove the
USB cable and close the cover.
NOTE: Battery power is consumed while the switch is
turnedon.Alwaysturno󰀨theswitchwhennotinuse.

11 ENGLISH
MAINTENANCE
CAUTION: Always be sure that the jacket is
switched o󰀨 and the battery cartridge is removed
before attempting to perform inspections or
maintenance.
CAUTION: If the jacket does not switch on
or any fault is found with a fully charged battery
cartridge, clean the terminals of the battery holder
and the battery cartridge. If the jacket still does
not work properly, stop using the jacket and con-
tact our authorized service center.
NOTICE: Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs,anyothermaintenanceoradjustmentshould
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
Cleaning the fan unit
• Use clean cloth to remove dirt, dust, oil, grease etc.
• Do not disassemble the fan unit when cleaning.
Cleaning the jacket
• Detach the fan unit(s) and battery holder from the
jacketbeforewashing.
• Follow the instructions on the tag.
• Cotton products may shrink when washed.
• Donotwashthejacketwithotherclothes.Doing
so may cause color fading or color transfer.
• Use a laundry net when using a washing machine.
• Do not use the fabric softener.
• Use only neutral detergent.
• Afterwashing,takeoutthejacketfromwashing
machine at once.
• Be sure to close the zip fastener before washing.
OPTIONAL ACCESSORIES
CAUTION: These accessories or attachments
are recommended for use with your Makita tool
specied in this manual. The use of any other
accessories or attachments might present a risk of
injurytopersons.Onlyuseaccessoryorattachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Battery holder
• Filter set
• Makita genuine battery and charger
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
di󰀨erfromcountrytocountry.

www.makita.com
Makita Europe N.V.
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi 446-8502 Japa
n
Jan-Baptist Vinkstraat 2,
3070 Kortenberg, Belgium
885800-223
EN
20200117