Marantz SR5005 User manual

SR5005 Home Theater Receiver
This is serious home theater hardware. A perfect combination of brute-force, finesse and convenience, the SR5005 in-
cludes a discrete, 100 watt x 7-channel output stage and boasts 4 HDMI 1.4 inputs and HDMI to HDMI video scaling up
to 1080p. Class-leading features, a super-shallow 14” chassis depth and exciting audio/video performance make the
SR5005 the perfect choice for discerning music and movie lovers alike.
AUDIO/VIDEO PROCESSING
ANALOG DEVICES: SHARC 32-bit Processor
 Dolby: True HD/Digital Plus&EX/Pro Logic IIz, IIx
Dolby: II/Virtual Speaker/Headphone
DTS: HD Master&High Res. Audio/ES/96/24/
DTS: Discrete&Matrix6.1/Neo:6/Express
DTS Neural Surround
Multi Ch Stereo
Audyssey MultEQ Auto Calibration w/ MIC
Audyssey Dynamic EQ / Dynamic Volume
9 Band EQ, -20dB - +6dB
Independent Crossover Setting for each speaker
Lip-sync (digital audio delay) 0-200 msec
Volume Control Setting: Limit, Power On Vol
Mute Level, Display type(dB or 0-99)
OSD output through HDMI
 Composite/Component to HDMI scaling up to 1080p
 HDMI to HDMI scaling
 Assignable HDMI, Component inputs
 Anchor Bay 10-bit Video Processing/Scaling
AUDIO/VIDEO CONNECTIONS
7.1 Channels
AM/FM, Sirius-Ready Tuner
56Tuner Presets: Group A-G: each 8 channels
6 RCA Analog inputs
3 Optical, 2 Coaxial SPDIF Digital Inputs
4/1 HDMI ver.1.4a In/Out
CEC (Control)
ARC(Audio Return Channel)
HDMI In Stand By
Auto Lip Sync.
Deep Color, x.v.Color
Pass through in Standby mode
3/1 Component In / Out
4/1 Composite In / Out
Assignable HDMI / Component inputs
 2 audio zones w/ zone 2 audio preamp out
Headphone Out
ADVANCED CONNECTIONS
Front USB input for digital iPod Connection
Bluetooth Wireless Audio Transmission Capability
External IR Receiver, DC Trigger supported
 7.1ch Inputs
 7.1ch Preamp Out
RC-5 and RS232C supported
USER CONFIGURABLE FEATURES
Input Level Adjust
Input Assign (Component In/Digital In)
Input Rename
Input Skip
On Screen Display (TEXT)
Display Status Info.
Software Upgradable
MARANTZ AUDIO ADVANTAGE
All-discrete, 100w x 7 Class AB Output Stage
High Current Linear Power Supply
EI Core Power Transformer
Pure Direct / Source Direct
M-DAX (Marantz Dynamic Audio eXpander)
Front Bi-Amp / Speaker Assign Capability
Fully Discrete Amplification
192kHz/24-bit Audio DACS

Home Theater Receiver
©2010 Marantz America, LLC · www.marantz.com
All specifications, dimensions and weights are subject to change without notice.
D&M Holdings, Marantz, Marantz America, LLC. or any of its subsidiaries will not assume any liability for errors in this spec sheet which may result in consequential errors
Being made by dealers, designers, custom installers, cabinet makers or end users, etc based upon information contained within this document.
SR5005
AUDIO SECTION • Color component video connector
• Power amplifier Input/output level and impedance: Y (brightness) signal — 1 Vp-
p, 75 Ω
Rated output: Front: PB / CB signal — 0.7 Vp-p, 75 Ω
100 W + 100 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.) PR / CR signal — 0.7 Vp-p, 75 Ω
180 W + 180 W (6 Ω, 1 kHz with 10 % T.H.D.) Frequency response: 5 Hz – 60 MHz — +0, –3 dB
Center: TUNER SECTION [FM] [AM]
100 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.) (Note: μV at 75 Ω, 0 dBf = 1 x 10–15 W)
180 W (6 Ω, 1 kHz with 10 % T.H.D.) Receiving Range: FM 87.5 MHz – 107.9 MHz
AM 520 kHz – 1710 kHz
Surround: Usable Sensitivity: FM 1.2 μV (12.8 dBf), AM 18 μV
100 W + 100 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.) 50 dB Quieting Sensitivity: MONO 2.8 μV (20.2 dBf)
180 W + 180 W (6 Ω, 1 kHz with 10 % T.H.D.) S/N (IHF-A): MONO 70 dB
Surround Back: STEREO 67 dB
100 W + 100 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.) Total harmonic Distortion (at 1 kHz): MONO 0.7 %
180 W + 180 W (6 Ω, 1 kHz with 10 % T.H.D.) STEREO 1.0 %
Output connectors: 6 – 8 Ω(SPEAKER A + B : 8 Ω) GENERAL
• Analog Power supply: AC 120 V, 60 Hz
Input sensitivity/Input impedance: 165 mV/50 kΩPower consumption: 650 W
Frequency response: 10 Hz – 100 kHz — ±3 dB (Source Direct mode) 0.2 W (Standby)
S/N: 98 dB (IHF–A weighted, Source Direct mode) 3 W (CEC standby)
VIDEO SECTION Maximum external dimensions: 440 (W) x 161 (H) x 389 (D) mm
• Standard video connectors Weight: 11.6 kg
Input/output level and impedance: 1 Vp-p, 75 ΩREMOTE CONTROL UNIT (RC010SR)
Frequency response: 5 Hz – 10 MHz — +1, –3 dB Batteries: R03/AAA Type (two batteries
For purposes of improvement, specifications and design are subject to change without notice.