Mark-10 ES10 User manual

Force Test Stand Series ES
MODELS ES10 & ES20
User’s Guide

Models ES10 & ES20 User’s Guide
1
Thank you…
Thank you for purchasing a Mark-10 Series 5 digital force gauge, designed for tension and compression
testing applications from 0.12 lb to 1,000 lb (0.5 N to 5,000 N) full scale. The Series 5 is an essential
component of a force testing system, typically also comprising a test stand, grips, and data collection
software.
With proper usage, we are confident that you will get many years of great service with this product. Mark-
10 force gauges are ruggedly built for many years of service in laboratory and industrial environments.
This User’s Guide provides setup, safety, and operation instructions. Dimensions and specifications are
also provided. For additional information or answers to your questions, please do not hesitate to contact
us. Our technical support and engineering teams are eager to assist you.
Before use, each person who is to use the Series 5 force gauge should be fully trained in
appropriate operation and safety procedures.
TABLE OF CONTENTS
GENERAL...........................................................2
Unpacking and setting up ...........................2
List of included items...................................2
OPERATION.......................................................3
SPECIFICATIONS..............................................4

Models ES10 & ES20 User’s Guide
2
UNPACKING AND SETTING UP
1. Carefully unpack the stand and inspect for any damage. Inspect the contents to ensure that you have received a
test stand complete with all accessories –see “List of included items” section.
2. Install the loading lever into the hub on the ES10 stand or install the hand wheel on the ES20 stand.
3. Place the stand on a firm, flat and level working surface free from vibration to ensure accurate readings. If
preferred, the test stand can be secured to a work bench with two screws or bolts through the two clearance holes
in the base –see “Operation” section for further details.
LIST OF INCLUDED ITEMS
Optional dial indicator kit ES001
The dial indicator kit, ES001, clamps onto the column of the stand. The dial can be
repositioned along the length of the column.
It allows for 1.0” travel and provides as resolution of 0.001”.
Optional digital indicator kit ES002
Displays up to 1" of displacement with resolution of 0.0005" and 0.01 mm. Includes zero
button and in/mm selector button.
Quantity
Item
1
Force measurement stand, ES10 or ES20
4
Thumb screws for gauge mounting
1
Mounting hole drill template

Models ES10 & ES20 User’s Guide
3
OPERATION
The test stand can be mounted to a work bench using the clearance
holes in the base –see drawing for hole location. The included mounting
hole drill template can be used to locate holes in work area.
All Mark-10 force gauges (except the Series CG) can be mounted
directly to the stand without adapters. Mount the gauge using the thumb
screws provided.
The loading lever on the ES10 can be adjusted to allow for ease of
operation. Reposition the lever using one of the three tapped holes
located in the hub –refer to the dimensional drawing on the next page.
If the optional dial Indicator kit (ES001) or digital indicator kit (ES002) is
purchased separately, it can be easily installed using the hardware
provided.
With respect to the loading shaft of the force gauge. When using
a grip, ensure that it secures the sample in such a way that it is
prevented from slipping out during a test, preventing a potential
safety risk to the operator and others in the vicinity. If using a grip
or fixture from a supplier other than Mark-10, ensure that it is
constructed of suitably rugged materials and components.\
SPECIFICATIONS
ES10
ES20
Load capacity
100 lbs [500 N]
100 lbs [500 N]
Maximum travel
9” [228.6 mm]
9” [228.6 mm]
Loading method
Rack & pinion
Hand wheel
Rate
1.050”/rev [26.7 mm]
0.083”/rev [2.1 mm]
Weight
10 lbs [4.5 kg]
10 lbs [4.5 kg]
ES10
ES20

Models ES10 & ES20 User’s Guide
4
DIMENSIONS
in [mm]
ES10
ES20

Models ES10 & ES20 User’s Guide
5
Mark-10 Corporation has been an innovator in the force and torque measurement fields
since 1979. We strive to achieve 100% customer satisfaction through excellence in product
design, manufacturing and customer support. In addition to our standard line of products we
can provide modifications and custom designs for OEM applications. Our engineering team
is eager to satisfy any special requirements. Please contact us for further information or
suggestions for improvement.
We make a measurable difference in force and torque measurement
Mark-10 Corporation