Markilux 710 User manual

safe · timeless · beautiful
29
markilux
General
Information
Technical
Information
Optional
Accessories
markilux
869
markilux
893
markilux
745 / 845
markilux
740 / 840
markilux
791/891
markilux
730 / 830
markilux
760 / 860
markilux
750 / 850
markilux
725 / 825
markilux
720 / 820
markilux
710 / 810
Speci cation
markilux
Collection
The Vertical cassette blinds with lateral guide cables, proven
and practical, classic and classy
markilux 710 / 810

30
Additional featuresTechnical highlightsDesign features
markilux 710 / 810
• hard-wired motor operation
(optionally with automatic
weather controls) for
straightforward and
easy operation
• radio-controlled motor
with radio remote control
for ease of use
• an easily installed, radio
control light and wind
sensor guarantees comfort
and a degree of safety -
even in your absence
• handle for interior operation,
for manual operation
from inside the room
• the cover is guided down
plastic-coated cables
• robust, self-supporting cassette
made of extruded aluminium
• operation by means of a smooth
gearbox and universal joint
• extremely sturdy, stainless
steel side cheek sheathed in
plastic and powder coated
• also available as a coupled
unit to span large widths
• vertical blind, complete
protection from the sun
and inquisitive glances
• markilux 710: compact, square
and discreet, the cassette pro le
made of extruded aluminium
is only 95 mm in height
• for long-lasting attractiveness
the awning has been
powder coated
• when retracted the cover is
protected from the weather
by the cassette, which
encloses it completely
• one-piece covers made from
widely woven, plain awning
fabrics make it possible to do
away with seams entirely
The vertical cassette blinds with lateral guide cables, proven and
practical, classic and classy
markilux 710 / 810
rated to wind resistance class 2
(corresponds to Beaufort 5)

31
Standard speci cation Standard frame colours Optional accessories
www.markilux.com
traf c white - RAL 9016
metallic aluminium - RAL 9006
grey brown - similar to RAL 8019
General
Information
Technical
Information
Optional
Accessories
markilux
869
markilux
893
markilux
745 / 845
markilux
740 / 840
markilux
791/891
markilux
730 / 830
markilux
760 / 860
markilux
750 / 850
markilux
725 / 825
markilux
720 / 820
markilux
710 / 810
Speci cation
markilux
Collection
manual operation from inside the building
manual operation from the rear
hard-wired or radio-controlled motor with
remote control
light and wind sensor
coupled units
non-standard powder-coated  nish
markilux 710 / 810
manual operation; handle with bayonet  tting
bonded awning cover
sunsilk snc fabric
sunsilk snc signature fabric
acrylic fabric 34
widely woven acrylic fabric
perfotex fabric
transolair fabric
reveal  xture, markilux 810 with
round cassette
side view of the markilux 810
reveal  xture, markilux 710 with
square cassette
side view of the markilux 710

Dimensions and conguration options
32
markilux 710 / 810
Operation
manual operation; handle with bayonet tting ●
manual operation from inside the building ○
manual operation from the rear ○
hard-wired motor ○
radio-controlled motor ○*
Covers
sunsilk snc (fabric series 324xx/329xx) ●1
sunsilk snc signature (fabric series 369xx) ●1
acrylic 34 (fabric series 341xx-347xx) ●2
widely woven acrylic (fabric series 349xx) ●3
sunsilk perla FR (fabric series 374xx/379xx) ○4
perfotex (fabric series 333xx) ●2
transolair (fabric series 339xx) ●5
Soltis 92 ○6
Miscellaneous
light and wind sensor ○
cover proles for gap between tracks and cover –
wedge-in accro bars –
markilux PVC windows –
Coupled units
coupled unit, 2 elds ○
coupled unit, 3 elds –
● = standard specication
○ = optional accessories
– = not available
○* = radio-controlled motor using 433 MHz technology
●1= in the case of the markilux 710 the maximum unit height is 300 cm
●2= in the case of the markilux 710 the maximum unit height is 250 cm
●3= from an overall width of 329 cm and a unit height of 316 cm with
horizontal seam
○4= in the case of the markilux 710 the maximum unit height is 250 cm
●5= cover seamless, from an awning width of 261 cm and a unit height of 248
cm with horizontal seam.
○6= cover seamless, from an awning width of 186 cm and a unit height of 173
cm with horizontal seam
Frame colours
trafc white - RAL 9016 ●
white aluminium - RAL 9006 ●
grey brown - similar to RAL 8019 ●
non-standard powder-coated nish ○
The width of the awning cover is always less than the width of the awning.
Coupled units on request.
Standard manual operation with bayonet tting and universal joint made of
stainless steel is operated from outside the building (winding handle lengths 110,
140, 160, 180 or 220 cm).
Manual interior operation with universal joint: this operation type requires exact
xture, usually means high (labour) costs for the end consumer and can only be
employed on single units. We therefore recommend the use of a radio-controlled
motor.
Manual operation using a universal joint and from the rear: This operation type
should be used in installations when the system can be approached from the rear
(e.g. on balconies).
In the case of manual operation it takes approximately 24 turns per metre of
overall unit height to extend the system.
Extension when using a motor takes approximately 15 seconds per metre.
N.B.! If the motor is used continuously it will stop automatically after 3 to 4
minutes to prevent overheating.
In the case of a bank of awnings operating simultaneously, the same speed of
rotation of the motors cannot be guaranteed because of tolerances within the
motors themselves.
If a number of single blinds are to be installed next to one another there must be
a distance of at least 25 mm between the blinds in the case of the markilux 710
and 30 mm in the case of the markilux 810.
If coupled blinds are tted into a recess or reveal the overall width of the coupled
awning must be at least 6 cm less than the width of the opening to allow the
awning to be coupled. Make a special note if an awning is to be tted into a recess
or reveal and note the recess/reveal dimensions separately on the order.
Coupled units are only available with motor (surcharge)
Maximum width of coupled units: 2 x 500 cm
= available, 3 brackets per cassette
= available, 2 brackets per cassette
blind width minimum
width
unit
height
75 100 125 150 175 200 225 250 275 300 325 350 375 400 425 450 475 500
hard-wired
motor
radio-
controlled
motor
71-75 76-100 101-125 126-150 151-175 176-200 201-225 226-250 251-275 276-300 301-325 326-350 351-375 376-400 401-425 426-450 451-475 476-500
120
75 74
160
200
250
300
350
dimensions in cm
Colours similar to the RAL chart - these may differ slightly from those depicted in
both hue and nish.
Housing tolerances / Awning cover dimensions Width unit
height
housing tolerance +5 / -10
awning cover width = width less 80
blind/awning cover length = unit height ±0
dimensions in mm

Fixtures, ttings and accessories
. = Please insert the RAL No. (please refer to the section on "Coatings")
33
General
Information
Technical
Information
Optional
Accessories
markilux
869
markilux
893
markilux
745 / 845
markilux
740 / 840
markilux
791/891
markilux
730 / 830
markilux
760 / 860
markilux
750 / 850
markilux
725 / 825
markilux
720 / 820
markilux
710 / 810
Specication
markilux
Collection
markilux 710 / 810
markilux 710
Universal bracket
assembly
Universal bracket
assembly with shplate for
lateral xture
right
N.B! Not for the operation
side:
- interior operation
- operation from the rear
Universal bracket
assembly with shplate for
lateral xture
left
N.B! Not for the operation
side:
- interior operation
- operation from the rear
50 mm
78758. 78916. 78917.
Universal bracket
assembly
for central xture
coupled unit
78919.
markilux 810
Face xture bracket
assembly
Top xture bracket
assembly
Face xture bracket
assembly with shplate
for lateral xture
right
N.B! Not for the operation
side:
- interior operation
- operation from the rear
50 mm 50 mm
78726. 78727. 78748.
Face xture bracket
assembly with shplate
for lateral xture
left
N.B! Not for the operation
side:
- interior operation
- operation from the rear
Face xture bracket
assembly
for central xture
coupled unit
78749. 78745.
markilux 710 / 810



Additional angle for reveal
xture



Angle plate for reveal
xture of cable guide
Accessories
two angle brackets 77220.
or 78565.
120 x 100 x 60 mm 40 x 40 x 50 mm
please order additional
accessories 792931!
please order additional
accessories 792931!
77220. 78565. 792931
Stand-off xing tube



Stand-off angle bracket



Stand-off angle bracket
30 x 10 x 1000 mm 80 x 40 x 25 mm 60 x 40 x 25 mm
N.B.!
stack to a max. of 120
mm
please order additional
accessories 799141!
please order additional
accessories 799141!
701668 70930. 70940.



Stand-off angle bracket Accessories
for one angle bracket
70930., 70940. or 79050.
40 x 30 x 25 mm
please order additional
accessories 799141!
70950. 799141

Fixtures, ttings and accessories
. = Please insert the RAL No. (please refer to the section on "Coatings")
34
markilux 710 / 810
markilux 710 / 810
Spreader plate assembly
for face-/universal bracket
Accessory pack for 2 guide
cables
Accessory pack for a
coupled cable clamp
100 x 120 x 10 mm
78982. 78761. 78910.
Reducing bolt assembly
M 10 - M 6 / SW 13
30 mm length
(please refer to the section
"Technical Information")
753211.

35
dimensions in mm
dimensions in mm
General
Information
Technical
Information
Optional
Accessories
markilux
869
markilux
893
markilux
745 / 845
markilux
740 / 840
markilux
791/891
markilux
730 / 830
markilux
760 / 860
markilux
750 / 850
markilux
725 / 825
markilux
720 / 820
markilux
710 / 810
Specication
markilux
Collection
markilux 710 / 810
Dimension overview
Face xture Top and reveal xture
AH = unit height
H = drop
M = overall blind/awning width
HT = bracket
AU = exterior
IN = interior
TB = cover width
MF = centre of the cable guide, centre of the stainless steel guide rod, xture width
95 50
min.
50
max.200
32
10
105
135
7
42
min. 135
3
27
9
3
107
9. 95
4535
6
95
98
95 10
105 50
9
3
max.200
32
107
50
29
274535
959.
6
20 1515
6
42
98
395
128
min. 50
95 10
M
50 50150150
MF
9 942
30
40 TB 40
IN
min.
5
AH
H
AU
95 3
128
=HT
=MB
How to install the markilux 710

36
dimensions in mm
dimensions in mm
markilux 710 / 810
AH = unit height
M = overall blind/awning width
HT = bracket
NB = reveal width
BD = horizontal drill hole
TB = cover width
MF = centre of the cable guide, centre of the stainless steel guide rod, xture width
M
MF
AH
105 6
111
50 50
40 40
TB
100
15
55
8
60
40
15
1030
6
50
48
NB
30 30
22 22
= HT
Reveal xture for gearbox/motor
6.73
85
6.
5
22
min. 12
4
35
4232
395
98
128
31
17
12
95
105
max. 450
10
BD
Face xture with interior operation
How to install the markilux 710

37
dimensions in mm
dimensions in mm
General
Information
Technical
Information
Optional
Accessories
markilux
869
markilux
893
markilux
745 / 845
markilux
740 / 840
markilux
791/891
markilux
730 / 830
markilux
760 / 860
markilux
750 / 850
markilux
725 / 825
markilux
720 / 820
markilux
710 / 810
Specication
markilux
Collection
markilux 710 / 810
SK = chase out depth
85
6
4,1 73
5°
5°
90°
33
12
22
ca. 500
14
32,5
5°
46°
6
26
4
16
31,4
SK - M5
12
28
41,6
Winding handle for interior operation Ø 16 mm up to a vertical angle of 90° and a
horizontal angle of 5°
47
47
14
Cable exit point in the case of motor-driven units
How to install the markilux 710

38
dimensions in mm
markilux 710 / 810
33
22
24
32
96
105
8
6
3
50
9
32
9
96
105
35 45 27
Operation from the rear
How to install the markilux 710