Martin 384EB User manual

1

2
2
2
2
3
4
8
8
8. ADVANCED PROGRAMING FUNCTIONS 9
54cm(21")

on a soft surface(blanket or carpet)
you do not scratch your floor and
on each

Attach 2 Level Studs(Part # 8)on each foot.

.5"in deep

If your desk top has a built in Power Center
you can plug the lift into the power center to
minimise the cord to the wall outlet.
Connect the wires as per the diagram below. Use the adhesive-backed Cable Clips
(Part #13) to secure the Connecting Wires, so they don’t sag.
Turn the assembled desk right-side-up. With two people lift the desk by the base
and the top. Then turn the assembled desk right-side-up. Adjust the leveling
studs on the feet (Part #2) as needed.
Your desk may or may not be predrilled.
7

32KG( 70 lbs)
8

8. ADVANCED PROGRAMING FUNCTIONS
1. HEIGHT CONTROL UP AND DOWN
The UP and DOWN buttons are used for moving the table up and down when the
user presses the button.
2. FOUR MEMORY PRESETS
Use the UP/DOWN button to find a desired height, then press “M” and release,
the handset will display “set”, choose number 1-4.
3. LOCK FEATURE
Press “M” and release, the handset will display “set”, hold the UP button for 5
seconds immediately, the handset will then display “LOC”.
Your desk now is locked.
TO UNLOCK
Press “M” and release, the handset will display “set”, hold the DOWN button for 5
seconds immediately, the handset will then display the current height.
Your desk now is unlocked.
9

Martin Furniture, 2345 Britannia Blvd, San Diego, CA 92154
[phone] / www.martinfurniture.com / [e-mail]