Martin INDIGO User manual

Martin/F. Weber Co. • 4444 Lawton Avenue, Detroit, MI 48208 USA
Tel:[phone] • Fax:[phone] • E-mail:[email protected]
www.MartinUniversalDesign.com • www.weberart.com • Made in China Nov 07 RPI
Page 1

Assembly Instructions - Page 2
[2 each]
Sides
STEP 1.
Take the two sides and insert two castors into
each sides legs.
PLEASE NOTE: You will need to use firm
pressure to the castor when inserting castors into
bottom of legs. Make sure the castors are in all
the way before continuing on.
See FIG 1.
Page 2
Nov 07 RPI
Remove contents of carton. Remove plastic wrap from product and discard.
Remove Twist ties from product to seperate into the following parts
[4 each]
Shelves
[4 each]
Castors
FIG 1.

Assembly Instructions - Page 3
STEP 2.
Placing the [4] shelves into
position.
NOTE: This step is best
assembled with the help of
another person.
Have one person hold onto
both sides of the Mobile
Taboret while the other
person places the shelves
into position.
Each shelf has two lower “L”
Hooks that must fit over the
bottom (3rd) wire row, while
the [2] top wire ends need to
be positioned on the top (1st)
wire row. See illustration 1
and FIG 2.
These shelves snap easily
into place.
REPEAT with all 3 remaining
shelves.
Page 3
Nov 07 RPI
Side of Taboret
1st wire row
2nd wire row
3rd wire row
ILLUSTRATION 1
FIG 2
1st wire row
2nd wire row
3rd wire row
WIRE END
“L” HOOK

Assembly Instructions - Page 4
Martin/F. Weber Co. • 4444 Lawton Avenue, Detroit, MI 48208 USA
Tel:[phone] • Fax:[phone] • E-mail:[email protected]
www.MartinUniversalDesign.com • www.weberart.com • Made in China
Page 4
Nov 07 RPI
STEP 3.
Your Indigo Mobile Taboret
should now look like the
illustration to the right.
This Mobile Taboret can be
used in the Laundry Room,
Kitchen, art studio,
for hobbies and so much
MORE!