MASSEY FERGUSON MF 3700 Series User manual

Operator's Manual
MF 3700 Series tractors
MF 3707
MF 3708
MF 3709
MF 3710
Beauvais
AGCO S.A.S. - 41 avenue Blaise Pascal - 60000
Beauvais - France - RC B562 104 539
© AGCO 2017
Original Operator's Manual
December 2017
ACT0042570
EAME
English

Find manuals at https://best-manuals.com

1 Tractor Identification ....................................................... 7
1.1 Introduction ......................................................... 9
1.1.1 Introduction ...................................................... 9
1.2 Tractor Identification ................................................11
1.2.1 Your tractor identification details ...................................... 11
1.3 Locating serial number .............................................. 12
1.3.1 Locating Serial Number ............................................. 12
1.4 Measure Unit ....................................................... 16
1.4.1 Metric and Imperial units abbreviations ................................. 16
2 Safety instructions and safety points – Warranty ............................. 19
2.1 Introduction - Safety instruction ..................................... 21
2.1.1 Introduction - Safety Instruction ....................................... 21
2.1.2 Foreword ....................................................... 22
2.1.3 Safety — Symbols and terms ........................................ 23
2.1.4 Safety instruction ................................................. 24
2.1.4.1 Forestry Applications ........................................ 24
2.1.4.2 Precautions before starting .................................... 24
2.1.4.3 Wear safety gear ........................................... 24
2.1.4.4 Noise protections ...........................................24
2.1.4.5 Proper use of steps and hand grips .............................. 24
2.1.4.6 Tractor Conditions .......................................... 25
2.1.4.7 Adjustment and maintenance operations ..........................25
2.1.4.8 Safe maintenance of the cooling system .......................... 25
2.1.4.9 Hydraulic system ........................................... 26
2.1.4.10 Electric System ........................................... 27
2.1.4.11 Setting the machine on support ............................... 28
2.1.4.12 Road Circulation ........................................... 28
2.1.4.13 Road transport ............................................ 29
2.1.4.14 Safe towing .............................................. 29
2.1.4.15 Tractor track .............................................. 29
2.1.4.16 Fuel .................................................... 29
2.1.4.17 Roll over protection structures (ROPS) ........................... 30
2.1.4.18 Falling objects protection structure (FOPS) ....................... 31
2.1.4.19 Protection structures against penetration of objects (operator protective
structures or OPS) ................................................ 31
2.1.4.20 Using the front loader on tractors .............................. 31
2.1.4.21 General precautions to implement when working with a front loader .... 31
2.1.4.22 Attachments and accessories ................................. 32
2.1.4.23 Stay clear of rotating drivelines - Using the safety belt - Passengers -
Stationary jobs .................................................. 32
2.1.4.24 Harmful products .......................................... 33
2.1.4.25 Filtering Rate ............................................. 34
2.1.4.26 Fuel Circuit - Handling waste product ........................... 34
2.1.4.27 Servicing tyres safely ....................................... 35
2.1.4.28 Parking - towing - transporting ................................ 35
2.1.4.29 Data sheet on tractor's vibration level - hazards due to exposure to
vibrations ...................................................... 36
2.1.5 Regulation (EU) 1322/2014 - Annex XXII - Safety aspects in accordance with
regulation and subsequent amendments and modifications ....................... 36
2.1.6 Instruction and safety label .......................................... 44
Table of contents
ACT0042570
Find manuals at https://best-manuals.com

2.1.7 Getting in and out of the machine ..................................... 51
2.1.8 Emergency Exit .................................................. 51
2.2 Warranty ........................................................... 53
2.2.1 Warranty instruction ............................................... 53
2.2.1.1 General .................................................. 53
2.2.1.2 Pre-delivery inspection and commissioning on the user’s premises ....... 53
2.2.1.3 Warranty procedure ......................................... 53
2.2.1.4 Procedure to follow if changing region ............................53
2.2.1.5 Servicing during and after the warranty period ...................... 54
3 Usage .................................................................... 55
3.1 Layout Controls .................................................... 57
3.1.1 Cab Version - Mechanical Version - Layout Controls ........................ 57
3.1.2 OOS Version - Mechanical Version - Layout Controls ........................ 59
3.1.3 OOS Version - Power Shuttle Low Spec Version - Layout Controls .............. 60
3.1.4 Cab Version - Electronic version - Layout controls .......................... 61
3.2 Starting and stopping of the tractor .................................. 64
3.2.1 Checks and Preliminary Operations before Starting Up ...................... 64
3.2.2 Starting and stopping the tractor ...................................... 67
3.3 Shuttle Lever - Range Lever - Transmission Lever ..................... 71
3.3.1 Shuttle lever .................................................... 71
3.3.2 Range Lever .................................................... 72
3.3.3 Transmission Lever ................................................72
3.3.4 Comfort Control Switch ............................................ 74
3.4 Clutch - Brakes - Hand Throttle ...................................... 76
3.4.1 Clutch ......................................................... 76
3.4.2 Brakes ......................................................... 77
3.4.3 Hand Throttle and Throttle Pedal ...................................... 78
3.5 Main Switch - Multifunction Lever - Steering wheel ................... 79
3.6 Battery cut-o switch - Instrument Cluster - Display Setting - Display
warning owerview ...................................................... 81
3.6.1 Battery cut-o Switch .............................................. 81
3.6.2 Instrument Cluster ................................................ 82
3.6.3 Digital Display Information .......................................... 82
3.6.4 Diesel Particulate Filter Regeneration .................................. 86
3.6.5 Language - Unit Measurement setting ..................................90
3.6.6 Transmission Errors - Engine Errors - Speed Pulse - Software ................. 93
3.6.7 Oil reset counter ................................................. 95
3.6.8 Cruise Control memory button ....................................... 97
3.6.9 Error Code List ................................................... 98
3.7 Machine Lights - Air conditioning - Heater ........................... 103
3.7.1 Machine Lights .................................................. 103
3.7.2 Heater and Air conditioner Controls ................................... 104
3.7.3 Air Conditioning Operation .......................................... 108
3.8 Fuses and Relays Box and Socket ................................... 110
3.8.1 Fuses and Relays Box - Location ..................................... 110
3.8.2 Fuses and Relays Box - Description ................................... 111
3.8.3 Engine Fuse Box ................................................. 114
3.8.4 Other Fuses .................................................... 115
3.8.5 Electrical Socket ................................................. 116
3.9 Tool Box - Ballast .................................................. 118
3.9.1 Tool Box ....................................................... 118
3.9.2 Ballast ........................................................ 118
3.10 Dierential Lock - Four wheel drive ................................. 119
3.10.1 Dierential lock ................................................. 119
3.10.2 Dierential Lock Logic ............................................ 119
Table of contents
ACT0042570
Find manuals at https://best-manuals.com

3.10.3 Four Wheel Drive ............................................... 119
3.10.4 Four Wheel Drive Logic ........................................... 120
3.11 Power Take O ....................................................122
3.11.1 Power Take O - Operating Instructions ............................... 122
3.11.2 Attaching PTO-Driven Implement .................................... 122
3.11.3 Attaching to the PTO Shaft .........................................124
3.11.4 Operating the PTO ...............................................124
3.11.5 Engage and disengage the PTO ..................................... 125
3.11.6 PTO Indicator Light and Speed Indicator ............................... 127
3.11.7 Select Ground Drive PTO Speeds .................................... 128
3.11.8 Power Take O condition for stationary work ............................128
3.11.9 PTO Warning Light Logic .......................................... 129
3.11.10 Front Power Take O ............................................ 130
3.12 Three Point Hitch ................................................. 131
3.12.1 Three Point Hitch ............................................... 131
3.12.2 Three point hitch system .......................................... 132
3.12.3 Hydraulic Lift - Three Point Hitch Control Levers ......................... 133
3.12.4 Lower Links - Ends adjustment ..................................... 136
3.12.5 Lower Links - Hook Type Ball Ends ................................... 137
3.13 Electronic Hitch Control ........................................... 138
3.13.1 Electronic Hitch Control System .................................... 138
3.13.2 Electronic Hitch control System - External Control Buttons ................. 147
3.14 Remote Valves ................................................... 148
3.14.1 Remote Auxiliary Valves .......................................... 148
3.14.2 Remote Auxiliary Valve - Joystick control .............................. 152
3.14.3 Remote Auxiliary Valve - Electrohydraulic control .........................155
3.15 Trailer Brakes - Trailer Hitch - Swinging Drawbar .................... 157
3.15.1 Trailer Brake System ............................................. 157
3.15.2 Trailer hitches - Models with slide guide rail ............................ 158
3.15.2.1 Trailer hitches - Models with slide guide rail - Types ................ 158
3.15.2.2 Adjusting trailer hitch height - EEC/CUNA C Model .................159
3.15.2.3 Adjusting trailer hitch height - CUNA D2 Model ................... 160
3.15.3 Trailer hitches - Models with holes guide rail ............................160
3.15.3.1 Trailer hitches - Models with holes guide rail - Types ................160
3.15.3.2 Adjusting trailer hitch height - Models with holes guide rail ........... 161
3.15.4 Swinging Drawbar .............................................. 161
3.15.4.1 Adjusting the swinging drawbar length ......................... 161
3.15.4.2 Drawbar maximum permissible vertical load ..................... 163
3.15.4.3 Adjusting the swinging drawbar height - models with slide guide rail ....163
3.15.4.4 Adjusting the swinging drawbar height - models with holes guide rail ... 163
3.16 Radio and Accessories ............................................ 165
3.16.1 Radio ........................................................ 165
4 Maintenance ............................................................. 167
4.1 General Maintenance .............................................. 169
4.1.1 Lubrification and Periodic Service ..................................... 169
4.1.2 Service Tractor Safely ............................................. 169
4.1.3 Air Conditioning System ........................................... 170
4.1.4 Electrical Service Maintenance ...................................... 171
4.1.5 Bulb replacement - Safety Instructions ................................. 172
4.1.6 Headlight alignment .............................................. 172
4.1.7 Headlight adjustment ............................................. 174
4.1.8 Replace head lamp bulb ............................................174
4.1.9 Replace rear work lamp bulb ........................................ 175
4.1.10 Tail/turn signal lights - bulb replacement ............................... 177
4.1.11 Cab working light - bulb replacement ................................. 179
4.1.12 Tires Maintenance ...............................................180
Table of contents
ACT0042570
Find manuals at https://best-manuals.com

4.1.13 Adjustment of steering angle ....................................... 181
4.1.14 Procedure for Removing Battery .....................................181
4.1.15 Power Shuttle Electronic Control Unit ................................. 184
4.1.16 Windscreen Washer System ....................................... 186
4.1.17 Removing Air from the Fuel circuit ................................... 186
4.1.18 Tractor Jacking Points ............................................ 187
4.2 Maintenance Table ................................................. 189
4.3 Maintenance Operation ............................................ 192
4.3.1 Engine Oil level Check ............................................ 192
4.3.2 Drain the Engine Oil .............................................. 192
4.3.3 Coolant Level Check .............................................. 193
4.3.4 Transmission/Hydraulic system Oil Level Check .......................... 193
4.3.5 Front PTO Oil level check .......................................... 193
4.3.6 Brake System Oil level Check ....................................... 194
4.3.7 Clean out dust from air cleaner valve .................................. 195
4.3.8 Lubrification Points ............................................... 196
4.3.9 Check Neutral Start System ........................................ 202
4.3.9.1 Mechanical reverse transmission (12/12 and 24/24) ................. 202
4.3.9.2 Power shuttle transmission (24/12) ............................. 203
4.3.10 Check Fan Belt Tightness ......................................... 204
4.3.11 Air conditioning compressor belt tension .............................. 204
4.3.12 Remove and clean the cab air filter elements ........................... 205
4.3.13 Tighten Bolts - Tires Pressure ...................................... 206
4.3.14 Air Cleaner Restriction Indicator Light ................................ 207
4.3.15 Transmission oil filter sensor ....................................... 208
4.3.16 Check the oil level in the front axle final reduction units - front axle dierential -
front axle housing .................................................... 208
4.3.17 Check Rops and Cab Tightness ..................................... 209
4.3.18 Air intake filter replacement ........................................209
4.3.19 Change the transmission/hydraulic oil ................................ 213
4.3.20 Change the oil suction strainer ..................................... 213
4.3.21 Fuel Filter Replacement .......................................... 213
4.3.22 Engine Oil and Filter Replacement ................................... 215
4.3.23 Front PTO Oil Replacement ........................................ 216
4.3.24 Replace transmission/hydraulic oil filter cartridge ........................ 217
4.3.25 Replace transmission/hydraulic oil filter cartridge (third pump) ............... 218
4.3.26 Replace Fan Belt ................................................219
4.3.27 Air conditioning compressor belt replacement .......................... 219
4.3.28 Drain the Fuel Tank .............................................. 219
5 Technical specifications ................................................... 221
5.1 Recommended lubricants and additives - Capacity ................... 223
5.1.1 Recommended lubricants and additives ................................ 223
5.1.2 Capacity ....................................................... 223
5.2 General Specifications ............................................. 224
5.3 Dimension and weight ............................................. 227
5.4 Travel Speed Table ................................................. 230
5.5 Power Take O Speed .............................................. 234
5.6 Tires Combination ................................................. 235
5.7 Tire - Load capacity ................................................ 236
5.8 Tires distance Scheme ............................................. 238
5.9 Front - Rear Track Chart ............................................ 240
5.9.1 Front Track Chart ................................................ 240
5.9.2 Rear Track Chart ................................................. 243
Table of contents
ACT0042570
Find manuals at https://best-manuals.com

1. Tractor Identification
1.1 Introduction .............................................................. 9
1.1.1 Introduction ........................................................... 9
1.2 Tractor Identification .....................................................11
1.2.1 Your tractor identification details ........................................... 11
1.3 Locating serial number ................................................... 12
1.3.1 Locating Serial Number .................................................. 12
1.4 Measure Unit ............................................................ 16
1.4.1 Metric and Imperial units abbreviations ...................................... 16
Table of contents
7
ACT0042570
Find manuals at https://best-manuals.com

Table of contents
8
ACT0042570
Find manuals at https://best-manuals.com

1.1 Introduction
1.1.1 Introduction
TO OUR CUSTOMER:
The following pages and illustrations are printed to help supply you with the knowledge required for
operation and service of your new tractor.
Any item of equipment needs, and must have a certain amount of service and maintenance to keep it in
top running condition. We have attempted to cover the various adjustments required to fit most conditions;
however, there may be times when additional special care must be taken to fit a given condition.
Study this operator’s manual carefully and acquaint yourself with the various adjustments and operating
procedures before attempting to operate your new equipment. Remember, it is a machine and has been
designed and tested to do an ecient job in most operating conditions and performance will be maximized
in relation to the service it receives.
If special attention is required for some operating conditions, ask your Dealer; his Parts and Service
Organization will be glad to help and answer any questions on operation and service of your new machine.
ATTENTION:
become alert your safety is involved!
This symbol is used to draw attention to safety precautions that should be followed by the operator to
avoid accidents. When you see this symbol - heed its warning.
THIS MANUAL MUST REMAIN WITH THE TRACTOR WHEN SOLD
This manual was prepared from the latest product information available at publication time. The Company
reserves the right to make changes at any time without prior notice or obligation.
WARRANTY INFORMATION
Your warranty for this tractor appears on your copy of the Retail Purchase Order and Warranty Terms and
Conditions Statement which you received from your Dealer when you purchased the Tractor.
As indicated on the Retail Purchase Order signed by you and your Dealer, you, the equipment purchaser,
shall assume charges for service calls or transportation of equipment to and from the location of the
servicing dealer.
Service Part
The use of non-approved parts may result in a part of substandard quality. The company will not accept the
responsibility for any loss, damage or liability resulting from the use of such parts. Using non-approved
parts may result in the manufacturer’s warranty being invalidated.
If You Move
The Customer is responsible for machine inspection and for replacement or repair of worn or damaged
parts when continued use could cause damage or wear to other parts.
It is also the responsibility of the Customer to deliver the machine to an authorised Dealer for service or
replacement of parts covered by the warranty. When requesting warranty service from a Dealer other than
the selling Dealer, the Customer must present a copy of the Delivery Record for the unit.
If the Dealer is requested by the Customer to travel to another location, or to haul the unit to the Dealer’s
shop for the purpose of performing warranty service or inspection, it is for the Customer’s convenience and
cost of such travel is to be paid by the Customer.
[V]
GUID-FCB0896E-08DD-4252-81F0-353C2ED0376D [V1]
1. Tractor Identification
9
ACT0042570
Find manuals at https://best-manuals.com

Service After Warranty
During the warranty period, you should have all your repairs and maintenance performed by your authorised
Dealer. This ensures that a detailed check is kept on the progress and performance of your new tractor.
In order to obtain the best results from your Massey Ferguson tractor, it is important that regular
maintenance and service checks continue after the warranty period has expired. Make use of your local
dealer for all major tractor services; a trained mechanic should spot any problems between one service and
the next.
The mechanics are regularly trained and updated on the product, servicing techniques and the use of
modern service tools and diagnostic equipment. Dealers receive regular Service Bulletins, have Workshop
Manuals and other such technical information to ensure that the repair or service is to the standard
required by the company.
1. Tractor Identification
10
ACT0042570
Find manuals at https://best-manuals.com

1.2 Tractor Identification
1.2.1 Your tractor identification details
Model:
Serial number:
Engine serial number:
Owner's name:
Street:
Postcode:
Town:
County:
Country:
Dealer code:
Tractor received from (tick one of the following):
Factory Other dealer (transfer)
Notes:
[V]
GUID-57220CEF-4B8D-4FEC-833A-AF9A48C690AB [V1]
1. Tractor Identification
11
ACT0042570

1.3 Locating serial number
1.3.1 Locating Serial Number
GUID-FF045D87-EC4E-4856-90D7-95EB4AF120C4-low.png [Low]
Fig. 1
[V]
GUID-226244FC-D08B-4E76-9E84-6CCA6A1DD892 [V1]
1. Tractor Identification
12
ACT0042570

GUID-B5CF2082-87E6-4DB2-8D7B-07B8E98DC6D5-low.png [Low]
Fig. 2
Tractor serial number
GUID-FAB64270-3464-487F-A883-0F709067AC65-low.png [Low]
Fig. 3
1. Tractor Identification
13
ACT0042570

Transmission serial number
GUID-3B7A14D2-DA2C-415C-835D-527AC67ED4A4-low.png [Low]
Fig. 4
ENGINE MAJOR COMPONENTS
(A) Fuel Pre-filter
(B) Oil filter
(C) Injection pump
(D) Primary fuel filter
(E) Feed pump
GUID-DA0CA4A3-B007-4059-A73F-A185083533D6-low.png [Low]
Fig. 5
(F) Oil cap with oil dipstick
GUID-0B2E3C8D-03EC-47A4-81F5-A623DF161C90-low.png [Low]
Fig. 6
1. Tractor Identification
14
ACT0042570

(G) Hydraulic pump
(H) Engine identification plate
GUID-E8A37795-C692-4858-B78D-ED9AF3808A09-low.png [Low]
Fig. 7
(I) Starter motor
(L) Alternator
GUID-B42402BA-2274-4973-B947-E5C3AE692086-low.png [Low]
Fig. 8
(M) Engine electronic control unit
GUID-24CBEBEF-1EA7-4C24-BD17-EE4D9B2BF9B8-low.png [Low]
Fig. 9
1. Tractor Identification
15
ACT0042570

1.4 Measure Unit
1.4.1 Metric and Imperial units abbreviations
TYPICAL APPLICA‐
TIONS
RECOMMENDED SI (METRIC) UNITS IMPERIAL UNIT
NAME SYMBOL NAME SYMBOL
AREA
hectare ha acre ha
square meter m² square foot ft²
square inch in²
square millimetre mm² square inch in²
ELECTRICITY
ampere Aampere A
volt Vvolt V
microfarad µF microfarad µF
ohm Ωohm Ω
FORCE
kilonewton kN pound lb
Newton Npound lb
FORCE PER LENGTH
Newton metres N/m pound per inch lb/m
FREQUENCY
Megahertz MHz Megahertz MHz
kilohertz kMz kilohertz kMz
hertz Hz hertz Hz
FREQUENCY - ROTATIONAL
revolution per
minute
r/min revolution per
minute
r/min
rpm rpm
LENGTH
kilometre km mile mi
meter mfoot ft
centimetre cm inch in
milimetre mm inch in
micrometre µm
MASS
kilogram kg pound lb
gram gounce oz
milligram mg
POWER
kilowatt kW horse power Hp 4
[V]
GUID-EEC8BB5C-24D4-4E9C-BB7B-B66CF3B1EF4F [V1]
1. Tractor Identification
16
ACT0042570

watt WBtu/hour Btu/hr
Btu/minute Btu/min
PRESSURE OR STRESS (FORCE PER AREA)
kilopascal kPa pound per square
inch
psi
inch of mercury inHg
pascal Pa inch of water inH2O
megapascal MPa pound per square
inch
psi
TEMPERATURE (other than THERMODYNAMIC)
degrees Celsius °C degrees Fahrenheit °F
TIME
hour hhour h
minute mminute m
second ssecond s
TORQUE (includes BENDING MOMENT, MOMENT OF FORCE, and MOMENT OF A COUPLE)
Newton per metre N m feet-pounds lb ft
inch-pound lb in
VELOCITY
kilometre per hour km/h mile per hour mph
meter per second m/s foot per second ft/s
millimetre per
second
mm/s inch per second in/s
meter per minute m/min foot per minute ft/min
VOLUME (includes CAPACITY)
cubic meter m³ cubic yard yd³ (cu yd)
litre lcubic inch in³
litre lUS. gallon US gal
U.K. gallon UK gal
US quart US qt
U.K. quart UK qt
millilitre ml fluid once floz
VOLUME PER TIME (includes DISCHARGE and FLOW RATE)
cubic meter per
minute
m³/min cubic foot per
minute
ft³/min
litre per minute l/min US gallon per
minute
US gal/min
millilitre per minute ml/min UK gallon per
minute
UK gal/min
SOUND POWER LEVEL and SOUND PRESSURE LEVEL
decibel dB decibel dB
1. Tractor Identification
17
ACT0042570

1. Tractor Identification
18
ACT0042570

2. Safety instructions and safety points –
Warranty
2.1 Introduction - Safety instruction .......................................... 21
2.1.1 Introduction - Safety Instruction ............................................ 21
2.1.2 Foreword ............................................................ 22
2.1.3 Safety — Symbols and terms ............................................. 23
2.1.4 Safety instruction ...................................................... 24
2.1.4.1 Forestry Applications ............................................. 24
2.1.4.2 Precautions before starting ......................................... 24
2.1.4.3 Wear safety gear ................................................ 24
2.1.4.4 Noise protections ................................................24
2.1.4.5 Proper use of steps and hand grips ................................... 24
2.1.4.6 Tractor Conditions ............................................... 25
2.1.4.7 Adjustment and maintenance operations ...............................25
2.1.4.8 Safe maintenance of the cooling system ............................... 25
2.1.4.9 Hydraulic system ................................................ 26
2.1.4.10 Electric System ................................................ 27
2.1.4.11 Setting the machine on support .................................... 28
2.1.4.12 Road Circulation ................................................ 28
2.1.4.13 Road transport ................................................. 29
2.1.4.14 Safe towing ................................................... 29
2.1.4.15 Tractor track ................................................... 29
2.1.4.16 Fuel ......................................................... 29
2.1.4.17 Roll over protection structures (ROPS) ................................ 30
2.1.4.18 Falling objects protection structure (FOPS) ............................ 31
2.1.4.19 Protection structures against penetration of objects (operator protective
structures or OPS) ..................................................... 31
2.1.4.20 Using the front loader on tractors ................................... 31
2.1.4.21 General precautions to implement when working with a front loader ......... 31
2.1.4.22 Attachments and accessories ...................................... 32
2.1.4.23 Stay clear of rotating drivelines - Using the safety belt - Passengers - Stationary
jobs ............................................................... 32
2.1.4.24 Harmful products ............................................... 33
2.1.4.25 Filtering Rate .................................................. 34
2.1.4.26 Fuel Circuit - Handling waste product ................................ 34
2.1.4.27 Servicing tyres safely ............................................ 35
2.1.4.28 Parking - towing - transporting ..................................... 35
2.1.4.29 Data sheet on tractor's vibration level - hazards due to exposure to vibrations ... 36
2.1.5 Regulation (EU) 1322/2014 - Annex XXII - Safety aspects in accordance with regulation
and subsequent amendments and modifications .................................... 36
2.1.6 Instruction and safety label ............................................... 44
2.1.7 Getting in and out of the machine .......................................... 51
2.1.8 Emergency Exit ....................................................... 51
2.2 Warranty ................................................................ 53
2.2.1 Warranty instruction .................................................... 53
2.2.1.1 General ....................................................... 53
2.2.1.2 Pre-delivery inspection and commissioning on the user’s premises ............ 53
2.2.1.3 Warranty procedure .............................................. 53
2.2.1.4 Procedure to follow if changing region .................................53
2.2.1.5 Servicing during and after the warranty period ........................... 54
Table of contents
19
ACT0042570

Table of contents
20
ACT0042570