Mastech ms6520a User manual

Operation Manual
D:S ratio
laser
1234
5
6
7
8
9
10
11
12
13
14
Noncontact Thermometer detects the infrared
ray that an object emits, the instrument
focalizes infrared energy of the object onto a
sensor through a lens, changes the surface
temperature into electric signal, a
microcomputer calculates and displays the
measurement temperature on the LCD.
• Single-spot Laser Sighting
• Backlit Display
• Current Temperature plus MIN, MAX, AVG
Temperature Displays
• Preset Emissivity 0.95
• one 9V Batteries
Infrared
Thermometer
Warning
• Please read the following information
carefully before using the meter.
• Do not clear the meter using solvents.
• Keep the instrument clean, and do not get
dust into detecting hole.
• Do not point laser directly at eye or
indirectly off reflective surfaces.
• Laser: class 2 <1mW/630-670nm
2
3
5
4
1
6
7
8
9
○
1 screen ○ 2 mode key ○ 3 backlight
key
○
4 laser key ○ 5℃/℉key ○ 6 sensor
○
7 laser ○ 8 trigger ○ 9 battery
cover
○
10 Average value ○ 11 primary display
○
12 surface scan ○ 13 hold status
Display
Make sure that the target is larger than the
meter’s visual spot size. The smaller the
target, the closer you should be to it. The
relationship between distance and spot size is
10:1
○
1 laser
indicator
○
2 scan status
○
3 emissivity
○
4 low battery
○
5℉unit
○
6℃unit
○
7 secondary
display
○
8 min value
○
9 max value
Description
Panel

Operating Thermometer
Specifications
Temperature range
-20℃~300℃or
-4℉~572℉
Certifications
CE
Accuracy: Assumes ambient
operating temperature
(23℃±2℃)
-20℃~0℃(±3℃)
0℃~300℃±(1.5%rdg+2℃)
laser
<1mW/630-670nm
class2
Optical resolution
10:1
Spectral
response
8-14 um
Repeatability
1℃
Response time
Approx.1s
Resolution
0.1℃/0.2℉
Emissivity
0.95
Ambient Operating Range
0~40℃
Dimensions
142×92×47mm
Relative humidity
10%~90%
Weight
135g
Standards
Conforms to EN61326
/EN61010-1/EN60825
Power
9V 6F22
75 F
75 F
225 F
12
6
3
9
30Min
22 C
72 F 0 C 32 F
•To measure temperature, pull and hold trigger. Release the
trigger to hold a temperature reading. The meter turns off
when no activity is detected for ten seconds.
• Press key to toggle between the MAX, MIN, AVG value
• Press key to Active the laser.
• Press key to light on or off the backlight
• Press key to switch between ℃or ℉
Note2 When ambient
temperature changes
quickly, must wait 30
minutes to balance the
temperature of the
instrument before use.
Note3 When the battery voltage is
lower, the battery symbol appears, it
indicates that we must change the
battery
Note1 Make sure that the
target is larger than the
meter’s visual spot size

Warranty
This product will be free from defects in material and workmanship for eighteen months from the
date of purchase. This warranty does not cover disposable batteries or damage for accident,
neglect, misuse alteration contamination, or abnormal conditions of operation or handling.
HYS006383