Warning
• Please read the following information car efull y
before using the meter.
Do not clear the meter using solvents.
Keep the instrument clean, and do not get dust into
detecting hole.
Do not point laser directly at eye or indirectly off
reflective surfaces.
Laser :class 2 <1mW/630-670nm
Protection is impaired if
used in a manner not specified in this manual
•Laser radiation is classified according t o
IEC 60825-1: 2014-05, Safety of laser products –
Part 1: Equipment classification and requiremen ts.
•
•
•
•
MS6520
B
Infrared Thermometer Noncontact Themometer detects the infrared ray that
an object emits, The instrument foculizes infrared
energy of the object onto a sensor through a lens,
changes the surface temperature into electric signal,
a microcomputer calculates and displays the
measurement temperature on the LCD.
• Single-spot Laser Sighting
Backlit Display
Current Temperature Plus MIN, MAX, AVG
Temperature Displays
Preset Emissivity 0.95
•
•
•
Screen
Mode key
Backlight key
Laser key
°C/°F key
02 0 3 0401
1
2
3
5
7
9
4
6
8
9
11
12
13
10
87
1234
5
6
2
3
5
4
Laser indicator
Scan status
Emissivity
Low battery
°F unit
°C unit
Secondary display
1
2
3
4
7
5
6
Panel Display D:S ratio
D
D (distance):S (spot size) = 10:1
300
900
1500
30
S
90
150
Unit: mm
Make sure that the target is larger than the meter's
visual spot size. The smaller the target, the closer you
should be to it. The relationship between distan ce and
spot size is 10:1
Description
laser
LASER RADIATION - DO NOT STARE INTO BEAM.
MAX OUTPUT<1mW, WAVELENGTH 630~670nm, CLASS 2 LASER PRODUCT
AVOID EXPOSURE - LASER RADIATION IS EMTTED FROM THIS APERTURE .
CAUTION
Laser radiation -
when open do not
stare into beam.
WARNING
Min value
Max value
Average value
Primary display
Surface scan
Hold status
8
9
11
13
10
12
Sensor
Laser
Trigger
Battery cover
6
7
8
9
3080912
