MasterForce 211-4314 User manual

Page 2
60" x 24" Workbench
Model #: 211-4314
CAUTION:
To Reduce The Risk Of Injury, User Must Read
And Understand Operator’s Manual. Save These Instructions
For Future Reference.
OPERATOR’S MANUAL
Actual product may differ
slightly from image shown

Page 1
TABLE OF CONTENTS
Safety Symbols ......................................................................... 2
Safety Instructions..................................................................... 3
Parts List ................................................................................... 4
Assembly................................................................................... 5
Maintenance and Safety............................................................ 6

Page 2
SAFETY SYMBOLS
Model #: _______________________________
Place of purchase: ______________________
Date of purchase:_______________________
Receipt # of purchase: __________________
CAUTION:
1. Read and follow all safety and assembly
instructions before using this product for
the first time.
2. Fill in the following information and retain
the manual for future reference:
Do not stand or lean on the worktop.
Do not allow children near the unit.
Do not lift unit by yourself.

Page 3
SAFETY INSTRUCTIONS
The purpose of safety symbols is to attract your attention to possible dangers. The safety
symbols, and the explanations with them, deserve your careful attention and understanding.
The symbol warnings do not by themselves eliminate any danger. The instructions and
warnings they give are no substitute for proper accident prevention measures.
WARNING:
Be sure to read and understand all safety instructions in this
manual, including all safety alert symbols such as “DANGER,” “WARNING,” and
“CAUTION,” before using this product. Failure to follow all instructions listed below may
result in electric shock, re and/or serious personal injury.
SYMBOL MEANING
SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, or CAUTION. May be
used in conjunction with other symbols or pictographs.
DANGER:
Failure to obey this warning WILL result in death or serious injury to
yourself or to others. Always follow the safety precautions to reduce the risk of personal
injury.
WARNING:
Failure to obey this safety warning CAN result in death or serious
injury to yourself or to others. Always follow the safety precautions to reduce the risk
of personal injury.
CAUTION:
Failure to obey this safety warning MAY result in personal injury to
yourself or others or property damage. Always follow the safety precautions to reduce
the risk of personal injury.

Page 4
PARTS LIST
For service regarding parts, assembly or warranty information, please call 1-800-459-4409.
Ref# Description Part# Qty
1Adjustable Feet 313068 4 pcs
2 M6 x 16 mm Hex Bolt 320327 42 pcs
1
2
Give this information for service parts: part number and quantity.

Page 5
ATTACH THE POSTS
Lay the wood top upside down on a soft
mat for protection. Identify the front and
back of the wood top. Note the locations of
the holes in the diagram below.
Front
Back
Attach each post to the worktop using four
M6 x 16 mm hex bolts. Tighten securely.
NOTE: The two posts labelled "Front Leg"
should be attached to the front of the
workbench. The other two posts should be
attached to the back of the workbench.
Post A
Post A
Post B
Post B
Front
Back
ATTACH THE
CROSS BRACES
Attach the three long cross braces and two
short cross braces using M6 x 16 mm hex
bolts. The cross braces should be attached
in the locations shown in the diagram and
as described below:
1 X LONG CROSS BRACE: Attach to top
back. Use four M6 x 16 mm hex bolts to
attach the cross brace to the posts and
three M6 x 16 mm hex bolts to attach the
cross brace to the worktop.
1 X LONG CROSS BRACE: Attach to top
front. Use four M6 x 16 mm hex bolts to
attach the cross brace to the posts and
three M6 x 16 mm hex bolts to attach the
cross brace to the worktop.
1 X LONG CROSS BRACE: Attach to middle
of the back posts using four M6 x 16 mm
hex bolts.
2 x SHORT CROSS BRACES: Attach one on
either end using four M6 x 16 mm hex bolts
per cross brace.
Tighten securely.
Front
Back
ASSEMBLY

Page 6
MAINTENANCE AND SAFETY
ATTACH THE
ADJUSTABLE FEET
Screw the four adjustable feet into the
bottom of the posts.
Turn the workbench upright.
MAINTENANCE
Periodically clean the frame and wood top
with mild detergent and water.
Grease and oil can be removed with most
standard cleaning fluids. For safety, use a
nonflammable cleaning fluid.
SAFETY
CAUTION:
The maximum product
weight, including contents, should be no
more than 2000 lbs.
WARNING:
DO NOT stand or
lean on the work top.
WARNING:
DO NOT mount this
product on a truck bed or any other moving
object. This may cause personal injury or
product damage.
WARNING:
DO NOT alter this
product in any manner. For example, do not
weld external lockbars or attach electrical
equipment. This may cause product
damage or personal injury.
CAUTION:
Keep the product on
level surfaces. The product may become
unstable and tip if stored or moved on an
uneven surface, which may cause personal
injury or product damage.

Page 7
NOTES

Page 8
NOTES

Page 9
NOTES

Page 10
SAVE YOUR RECEIPTS
THIS WARRANTY IS VOID WITHOUT THEM
Page #
60" x 24" Workbench
LIMITED LIFETIME WARRANTY
MASTERFORCE®workbenches have been manufactured to the highest standards
of quality and workmanship and are warranted to be free from defects in materials
and workmanship under normal use for the lifetime that you own the product. If
any part of the product is found to be defective during normal use, the defective
product or part will be replaced at our discretion. This warranty does not cover
products that are damaged through accident, abuse, misuse, commercial/
industrial applications or neglect. This warranty also does not cover any losses,
injuries or costs including indirect, incidental or consequential damages. This
warranty may not be transferred or sold. When requesting warranty service please
have the model number, cash register receipt and the date of purchase available
when you call. If the product is defective, we will replace the defective part at no
cost to you. Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitations or exclusions may not apply to
you. This warranty gives you specific legal rights and you may have other rights,
which vary from state to state.
For questions / comments, technical assistance or repair parts,
call toll free: 1-800-459-4409 (M–F, 8am–4:30pm, CST)

©2019 Menard, Inc., Eau Claire, WI 54703 V1 07/2019