Masterlock 3685 User manual

1. Locate center line of inside locker.
2. Place mounting template on locker sidewall
& align center line of template with center
line of locker (a), keeping dotted line of
template on locker wall edge (b).
3. Fold template on dotted line using the edge
of the locker wall.
4. Mark hole placement for strike screws.
5. Screw strike to locker wall using provided
screws.
6. You have successfully mounted the strike.
3685 & 3681 Electronic Built-In
Locker Lock
Strike Plate Mounting Instructions

3685 & 3681 Electronic Built-In Locker Lock
Strike Plate Template
Template is to scale and can be used if printed at 100%.

1. Locate center line of inside locker.
2. Place mounting template on locker sidewall
& align center line of template with center
line of locker (a), keeping dotted line of
template on locker wall edge (b).
3. Keeping template in place, close locker
door.
4. Mark edge of closed locker door on
template.
5. Move mounting template to front of locker
door & align center line of template with
center line of locker (c), keeping the drawn
line (d) in line with the door edge. Tape
template in place & drill holes with proper bit
sizes.
6. Door is ready to accept the electronic locker
lock.
3681 & 3685 Electronic Built-In
Locker Lock
Lock Mounting Instructions

3685 & 3681 Electronic Built-In Locker Lock
Lock Mounting Template
Template is to scale and can be used if printed at 100%.
Mounting template follows standard TMLC 3-hole pattern for ease of installation

3685 & 3681 Electronic Built-In Locker Lock
Critical Installation Dimensions