G3S76 ROTARY HIP
UNPACKING G3S76 ROTARY HIP
Thank you for purchasing a MATRIX Fitness product. Carefully unpack the unit from this box and dispose of the packing
materials in accordance with your local laws.
CAUTION
The weight of the G3S76 Rotary Hip is 582lbs. (264kg) not including the weight stack. To avoid injury to yourself and
prevent damage to the frame components, be sure to have proper assistance removing the frame pieces from this box.
G3S76
ROTARY HIP
IMPORTANT SAFETY INFORMATION
It is the sole responsibility of the purchaser of MATRIX Fitness Systems products to instruct all individuals, whether they are the
end user or supervising personnel on proper usage of the equipment.
It is the sole recommended that all users of MATRIX Fitness Systems exercise equipment be informed of the following information
prior to its use.
PROPER USAGE
1. Do not use any equipment in any way other than designed of intended by the manufacturer. It is imperative the sole
recommended that all users of MATRIX Fitness Systems exercise equipment be informed MATRIX Fitness Systems
equipment is used properly to avoid injury.
2. Keep hands and feet clear at all times from moving parts to avoid injury.
CHECK FOR DAMAGE PARTS
1. DO NOT use any equipment that is damaged and or has worn or broken parts. Use only replacement parts supplied by your
country’s local MATRIX Fitness Systems dealer.
2. MANINTAIN LABELS AND NAMEPLATES: DO NOT remove labels for any reason. They contain important information. If un-
readable or missing, contact your MATRIX Fitness Systems dealer for a replacement.
3. SECURING EQUIPMENT: All equipment MUST be secured to the floor to stabilize and eliminate rocking of tipping over. A
licensed contractor must be performed this, where application.
4. MAINTAIN ALL EQUIPMENT: Preventative maintenance is the key to smooth operating equipment as well as keeping your
liability to a minimum. Equipment needs to be inspected at regular intervals.
5. Ensure that any person(s) making adjustments or performing maintenance or repair of any kind is qualified to do so. MATRIX Fitness
System dealers will provide service and maintenance training at our corporate facility upon request.
Matrix Fitness Systems Corp. 1610 Landmark Drive Cottage Grove WI 53527
Toll Free 866.693.4863 www.matrixfitness.com Fax 608.839.8687
Step 1
Input Detail
Step 2
G3S76 ROTARY HIP
Weight Stack Detail
Step 3
Belt Routing Detail
Step 4
Accessory Detail
Step 5
TOOLS NEEDED
DESCRIPTION SKETCH QUANTITY
3MM L-Shaped Allen Wrench 1
4MM L-Shaped Allen Wrench 1
5MM L-Shaped Allen Wrench 1
6MM L-Shaped Allen Wrench 1
8MM L-Shaped Allen Wrench 1
10MM L-Shaped Allen Wrench 1
Phillips Screwdriver 1
8MM Open-End Wrench 1
17MM Open-End Wrench 1
Guide Rod Lubrication 1
Hardware Bag
If any items are missing please contact your country's local Matrix dealer for assistance.
Description Sketch
E-Clipper (E-15)Z31
Item
4
Qty
Description Sketch
Item Qty
CableF05 1
Arc-flat
Washer (M10)
Allen Head Cap Screw (M10x25L)
Lock
Washer (M10)
Qty
Item Description
Z08
Z10
Z39
Z09
Sketch
Lock Washer (M10)
Flat Washer (M10)
Allen Head Cap Screw (M10x25L)
Arc-flat Washer (M10)
8
8
12
4
Qty
Item Description
D20
Z15
Z16
Z24
Sketch
E-Clip (E24)
Flat Washer (M12)
Screw (M10x25L)
Allen Head Cap Screw (M12x30L)
1
4
2
D40 Wavy Was 1
Z12 Spacer 11
Z13 Cover 1
1
F05
Cable Fixer
Z31
Z30
Sticker,Weight Stack Plate
Q05 Rubber Shield Spacer 4
Q06 Rubber Tip Weight Shield Bolt 4
Rubber Stack CushionsZ30 2
Flat Washer (M10)
PART # MH0204527B
Z08 x12
Z10 x8
Z09 x8
Z39 x4
Z15
Z24 Z16
Z13
D20
Z12
D40
Q06
Q05
Guide Sleeve
Guide Rod
Top Weight
Selector Pin
Screw
Rubber Tip Weight Shield Bolt
Rubber Shield SpacerQ05
Q06
6
6
Upper CoverQ02 2
Item Description Sketch Qty
Z34 6
Internal Tooth Lock Washer
B34 Screw (M8x30L) 2
B71 Screw (M8x18L) 4
B43 Screw (M4x12L) 6
Q06 x6
B34 x2
Towel / Water
Bottle Holder
Description panels
B43 x6
Z34 x6 Q05 x6
Weight Shield
Q02 - Upper Cover x2
B71 x4
