Matrix ROM3 User manual

OWNER’S
MANUAL
REHAB SYSTEM

ROM3Rehab System Owner’s Manual
2
BEFORE YOU BEGIN
Prior to assembling the unit, unpack all of the contents of the box and make sure that all
necessary components are present. Review the contents of the hardware package for
completeness.
To ensure correct assembly of the unit, carefully read and follow all assembly steps.
TOOLS REQUIRED
8 mm Allen Wrench Adjustable Wrench
PARTS INCLUDED
• 2 Pedals
• 2 Discs
• 2 Pedal Blocks
(left and right)
Assembly steps and instructions
NEED HELP?
Contact Customer
Tech Support
to report any
missing items.
866-754-7089
left disc
left pedal
right pedal
block
right disc
right pedal
left pedal
block

ROM3Rehab System Owner’s Manual
3
STEP 1 – Attaching the discs to the bike
a. Place one disc onto the spindle with the “A” channel up
(Fig.1b).
b. Securely tighten it with the 8 mm Allen wrench.
(Clockwise)
c. Place the other disc onto the other spindle with the “A”
channel pointing downward (Fig. 1c).
d. Securely tighten it with the 8 mm Allen wrench.
(Clockwise)
STEP 2 – Attaching the pedals to the pedal blocks
a. Start with the LEFT pedal block.
b. Fit it onto the “A” Channel of the disc with the words
“TOP LEFT” up (see Fig. 2a)
c. Pull the pin release and let the pedal block be secured
into the hole in the channel.
d. Take the LEFT pedal and screw it into the pedal block
COUNTERCLOCKWISE (see Fig. 2b)
e. Take the RIGHT pedal block.
f. Fit it onto the “A” Channel of the disc with the words
“TOP RIGHT” up (see Fig. 2c)
g. Pull the pin release and let the pedal block be secured
into the hole in the channel.
h. Take the RIGHT pedal and screw it into the pedal block
CLOCKWISE (see Fig. 2c).
Assembly is now complete. The bike is now ready
for operation.
spindle
Right Side: “A” Channel up
Screw left pedal into the “TOP LEFT”
pedal block COUNTERCLOCKWISE.
Fit pedal block into the “A” Channel
and pull the pin release to secure.
Screw right pedal into the “TOP
RIGHT” pedal block CLOCKWISE.
Left Side: “A” Channel down
g. 1a g. 1b g. 1c
g. 2a g. 2b g. 2c

ROM3Rehab System Owner’s Manual
4
Basic usage
Please refer to the cycle Owner’s Manual and the ROM3Protocol regarding use
of the bike.
Technical Information
Table showing the length of the radius in each pedal position.
Pedal Position Radius in Inches Radius in CM
1 1.7 4.3
2 2.7 6.8
3 3.7 9.4
4 4.7 12.0
5 5.7 14.5
6 6.7 17.0
Table showing the rotational distance (circumference) in each pedal position.
Pedal Position
Rotational
Circumference
in Inches
Rotational
Circumference
in Centimeters
1 10.6 27.0
2 16.9 42.7
3 23.2 59.0
4 29.4 75.3
5 35.7 91.0
6 41.9 106.7
Basic operation and usage
Technical
Service Contact
Information
For questions
on patient protocol
and medical matters.
Phone:
866-754-7089
Email:
[e-mail]
© 2015 ROM3 California LLC. All rights reserved. ROM3is a registered trademark.