Matrix MX-G3MS40 Instruction Manual

MX-G3MS40
4 STACK MULTI STATION
IMPORTANT SAFETY INFORMATION It is the sole responsibility of the purchaser of MATRIX Fitness Systems products to instruct all individuals, whether they are the end user or supervising personnel on proper usage of the equipment. It is the sole recommended that all users of MATRIX Fitness Systems exercise equipment be informed of the following information prior to its use. PROPER USAGE 1. Do not use any equipment in any way other than designed of intended by the manufacturer. It is imperative the sole recommended that all users of MATRIX Fitness Systems exercise equipment be informed MATRIX Fitness Systems equipment is used properly to avoid injury. 2. Keep hands and feet clear at all times from moving parts to avoid injury. CHECK FOR DAMAGE PARTS 1. DO NOT use any equipment that is damaged and or has worn or broken parts. Use only replacement parts supplied by your country’s local MATRIX Fitness Systems dealer. 2. MANINTAIN LABELS AND NAMEPLATES: DO NOT remove labels for any reason. They contain important information. If un- readable or missing, contact your MATRIX Fitness Systems dealer for a replacement. 3. SECURING EQUIPMENT: All equipment MUST be secured to the floor to stabilize and eliminate rocking of tipping over. A licensed contractor must be performed this, where application. 4. MAINTAIN ALL EQUIPMENT: Preventative maintenance is the key to smooth operating equipment as well as keeping your liability to a minimum. Equipment needs to be inspected at regular intervals. 5. Ensure that any person(s) making adjustments or performing maintenance or repair of any kind is qualified to do so. MATRIX Fitness System dealers will provide service and maintenance training at our corporate facility upon request.
Matrix Fitness Systems Corp. 1610 Landmark Drive Cottage Grove WI 53527
Toll Free 866.693.4863 www.matrixfitness.com Fax [phone]
G3MS40 4-Stack Multi Station
UNPACKING G3MS40 4-Stack Multi Station
Thank you for purchasing a MATRIX Fitness product. Carefully unpack the unit from this box and dispose of the packing
materials in accordance with your local laws.
CAUTION
The weight of the G3MS40 4-Stack Multi Station 990lbs. (499kg) not including the weight stack. To avoid injury to yourself
and prevent damage to the frame components, be sure to have proper assistance removing the frame pieces from this
box.
Step 1
Step 2
G3MS40 4-Stack Multi Station
Step 3
Step 5
Step 6
TOOLS NEEDED
DESCRIPTION SKETCH QUANTITY
3MM L-Shaped Allen Wrench 1
4MM L-Shaped Allen Wrench 1
5MM L-Shaped Allen Wrench 1
6MM L-Shaped Allen Wrench 1
8MM L-Shaped Allen Wrench 1
10MM L-Shaped Allen Wrench 1
Phillips Screwdriver 1
8MM Open-End Wrench 1
17MM Open-End Wrench 1
Guide Rod Lubrication 1
Hardware Bag
If any items are missing please contact your country's local Matrix dealer for assistance.
Frame Detail
Accessory Detail
Step 3
Lat Pull
Z17 Screw,Oval-Hex Socket (M10 X 25L)
Arc-flat Washer
Z18
Nylon Nut (M10)
Screw,Oval-Hex Socket (M10 X 80L)
Description Sketch
Flat Washer (M10)
Screw,Oval-Hex Socket (M10 X 90L)
Item
Z07
Z08
Z05
Z04
2
2
Qty
36
2
18
16
Screw (M12 X 25L)
Flat Washer (M12)
Lock Washer (M12)
Z10
Z11
Z12
2
2
2
Screw,Oval-Hex Socket (M10 X 25L)
Z15 3
Rubber Stack Cushions
Z16
Nylon Nut (M6)
Screw,Oval-Hex Socket (M6 X 45L)
Z13
Z14
2
2
2
F23
F22
Nylon nut
Bolt 7
7
V03 Sticker, Weight Stack Plate 1
F06 Pully 7
F08 Cable 1
Tricep
Flat Washer (M10)
Screw, Oval-Hex Socket (M10 X 90L)
Item
Z09
Z07
Z10
Description
Nylon Nut (M10)
16
8
8
QtySketch
Screw, Oval-Hex Socket(M10 X 25L)
Z02 4
Rubber Stack Cushions
Screw, Oval-Hex Socket(M6 X 45L)
Z05
Z11
Z06 Nylon Nut (M6)
2
2
2
Sticker, Weight Stack Plate
V02 1
Pully
F06 1
Cable
F08 1
Bolt
F22 2
Low Row Adjustable Pully
Nylon Nut (M10)
Screw (M10 X 80L)
Arc-flat Washer
Screw, Oval-Hex Socket (M10X 25L)
Flat Washer (M10)
Description Sketch
Nylon Nut (M8)
Screw, Oval-Hex Socket (M8X 70L)
Z11
Z13
Z16
Item
Z08
Z09
Z10
Z07
4
Spring Washer (M10)
Z12 4
2
2
Qty
2
2
2
2
Screw, Oval-Hex Socket (M10X 25L)
Z02 4
Rubber Stack Cushions
Z14
Nylon Nut (M6)
Screw (M6 X 45L)
Z05
Z06
2
2
2
9
9
Nylon Nut
F23
F22 Bolt
Flat Washer (M8)
K18 2
Z01
Z02
Item
4
Screw, Oval-Hex Socket (M10 X 95L)
Flat Washer (M10) 8
Description Sketch Qty
Nylon Nut (M10)
Z04 4
Screw, Oval-Hex Socket (M12 X 25L)
Flat Washer (M10)
Lock Washer (M10)
Z05
Z07
Z06
2
2
2
Rubber Stack CushionsZ13
Nylon Nut (M6)
Screw, Oval-Hex Socket (M6 X 45L)Z11
Z12
2
2
Sticker, Weight Stack PlateV03 1
Pully (115mm)F01 5
Pully (90mm)F02 2
2
Nylon nutF04 7
CableF05 1
Rubber Tip Weight Shield BoltZ20 8
Rubber Shield SpacerZ21` 8
Allen Head Cap Screw (M8 X 30L)Z08 2
F03 Bolt 7
Item Description Sketch Qty
Screw,Oval-Hex Socket (M8 X 25L)
Z16 12
Screw,Oval Hex Socket (M6 X 20L)Z19
Item Description Sketch
32
Qty
PART # MH0204579B
NOTE:
Before attaching weight plate decals
be sure to verify the head plate is
positioned on the weight stack so
that the bolt attaching the pull pin to
the headplate is positioned behind the
chrome adjustment tube.
Z16
Z13
Z14
Guide Sleeve
F08
N13
Z04
Z05
Z05
Z08
Z07
Z05
Z05
Z18
Z17
Z04 Z05 Z07
Z10 Z12
Z11
Z15
V03
F06
F23
F22
F06
F22
F23 F06
F23
F22
F22
F06
F23
F40
Z05
Z06
F08
Guide Sleeve
V04
V04
Z09
Z10
Z07
Z02
Z11
V02
Z01
F23
F06
F22
Z07
F23 F06
F22
Guide Rod
Selector Pin
TopWeight
Guide Sleeve
Nylon Nut (M6)
F23 2
Screw (M8 x 30L)
F01 2
T24
T23
T22
Z02
Z13
Z14
Z14
Handlebar Holder
Hooker
Z12
k18
Z13
Z07
Z08
Z09
Z11
Z11
Z10
Z16
V03
F07
F05
F23
F22
F23
F05
F22
F23
F05
F22
F23
F22
F05
F05
F23
F22
F05
Z20
Z21
Z21
Z20
Z05
Z06
Z07
Z06
Z07
Z05
F03
F01
F01
F04
F04
F03
F01
Z02
Z01
Z13
Z11
Z12
V03
F01
F03
F03
F04
F02
F01
F04
F03
F02
F03
F02
F03
F04
Z04
Z08
F04
F04
Lat Pull
Low Row
Tricep
Adjustable Pully LEFT
Z16
Z16
Z19