Max-Ability PRESSALIT VersaMini User manual

VersaMini Restroom
Changing Table
User Manual
SKU: R8455512000
EAN: 5708590376585
max-ability.com
MAX-Ability, Inc.
[email protected]
800 577-1555

max-ability.com
The guarantee covers faults or defects in material or
manufacture within a period of 5 years. Products are
subject to minor technical modifications and design
deviations. E.&O.E.
[email protected] 800.577.1555

3
R8481
PressalitA/S, Pressalitvej 1
DK-8680 Ry [phone]
pressalit.com
REF
++
++
==
YYYY-MM-DD RZZZZYYYXXX-X
(01)0XXXXXXXXXXXXX(10)YYMMDD
xxx kg
xxx lbs
xxx kg
xxx lbs
++
Product weight: 60 lbs Weight capacity: 331 lbs

4
inch
47.24
10.63
27.5
6

5
en
Original instructions
Mounting instruction
A mounting instruction is included with the product. It can also
be downloaded from pressalit.com.
Content
Mounting instruction ..................................................5
Symbols used in this manual............................................6
General safety .........................................................7
Product label..........................................................8
Intended use ..........................................................9
Intended user profile ................................................9
Operating environment..............................................9
Contraindications for use ............................................9
Operating instructions ................................................10
The safety rail.....................................................11
Cleaning.............................................................13
Maintenance.........................................................14
Maintenance inspection ............................................14
Trouble-shooting .....................................................15
Technical data........................................................15
Disposal and recycling ................................................15

6
en
Symbols used in this manual
The following symbols are used in this manual as well as the associated
documentation supplied with the product.
!WARNING
WARNING indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
!CAUTION
CAUTION indicates a potentially hazardous situation which, if not avoided,
may result in minor or moderate injury. It may also be used to alert against
unsafe practices.
IMPORTANT
IMPORTANT indicates important information about handling and use of
the product.
NOTICE
NOTICE is used to address practices not related to personal safety.
Hand injury warning Compatible products
++
Product weight Max user weight

7
en
General safety
!CAUTION
• Please comply with these instructions to avoid the product becoming
damaged or destroyed.
• Do not perform repairs, disassembly, or assembly operations,
extensions, re-adjustments or modifications to this product. These
must be carried out by Pressalit or by persons authorized by Pressalit
only.
• Never allow children to operate this product unless under supervision.
The product is not intended for play.
• Never use the product if it is defective or damaged. Do not use a
defective product before it has been repaired.
!WARNING
• Read and understand the manual completely before use. Keep the
manual close to the unit.
• Comply with this manual to avoid accidents involving serious personal
injury.
• Never use or handle this product in other ways than are specified in
this manual, as this can put your safety at risk and cause damage to the
product.
• Make sure that everyone who is to install or use the product and its
systems has the necessary information and access to this manual.
NOTICE
• The information in this manual is based on correct fitting of the
product in accordance with our mounting instruction.
• Pressalit cannot be held liable if the product is used in any way which
differs from that described in the guide.
• We reserve the right to amend this manual without prior notice.

8
en
Product label
①Production date
②Article number
③Medical device
④Batch code
⑤GS1-128 barcode
⑥Name and address of manufacturer
⑦Maximum user weight
⑧Max load
⑨Consult manual for use
⑩These products are CE-marked in accordance with relevant
requirements in regulation (EU) 2017/745 (5 April 2017) on medical
devices.
A declaration of conformity can be found at pressalit.com
Pressalit A/S, Pressalitvej 1
DK-8680 Ry [phone]
pressalit.com
REF
⑥⑦⑧⑨⑩
①②③④⑤
++
++
==
YYYY-MM-DD RZZZZYYYXXX-X
(01)0XXXXXXXXXXXXX(10)YYMMDD
xxx kg
xxx lbs
xxx kg
xxx lbs

9
en
NOTICE
Any serious incident that has occurred in relation to the product should be
reported to the manufacturer and the health authorities.
!CAUTION
The surface of the product may become hot and / or cold if exposed to
external sources of heat or cold (e.g. sunlight or frost).
Intended use
This product is intended for partly self-reliant user while getting dressed.
Intended user profile
The product can be used by all - adults, children, young, old, whose weight
does not exceed the maximum load of 150 kg / 331 lbs.
Operating environment
The product is intended to be used at room temperature in private homes,
nursing homes and hospitals under normal working conditions.
Contraindications for use
Use of the change table is not recommended for patients with infusion or
insulin pump, inflammatory skin diseases or patients in feverish conditions.
Patients with cardiac insufficiency, cardiovascular diseases, craniocerebral
injury, open wounds, feed or drain lines (e.g. catheter, drainage tube) may use
the change table only after consulting with the attending physician.
Do not use if the patient’s weight exceeds 150 kg / 331 lbs.

10
en
Operating instructions
Support the bench using your hand or body when folding it down, to avoid
the risk of damage.
The built-in gas cylinders make it easy to fold the table up against the wall
after use. Be sure to fold the safety rail away first.
Take care to avoid injury to hands
when in the vicinity of moving
mechanical parts.
Bælte

11
en
The safety rail
To pull the safety rail up: Release the lock ①
and pull the safety rail from the underside of the
table, and swing it upwards. The safety rail will
automatically lock into position.
To fold the safety rail away: Release the lock ① and swing the safety rail
down to the underside of the table. The safety rail will automatically lock into
position.

12
en
1
1
The table top can be leveled by
adjusting the 2 set screws ① up or
down.

13
en
Cleaning
Clean the change table after each use. Use ordinary soapy water. Rinse off
with fresh water and dry with a soft cloth. Wipe off any water on the bench
surface.
IMPORTANT
• Do not use an autoclave or other type of steam cleaner.
• Avoid aggressive cleaning agents containing acids or chloride.
• Never spray the change table directly with a high pressure cleaner.
• Avoid use of aggressive, abrasive, corrosive or chloride-based cleaning
or disinfecting products.
!CAUTION
Always read the material safety data sheet (MSDS) and supplied
instructions of the cleaning, disinfecting or de-scaling agent and comply
with instructions for safe use, dilution, rinsing, drying, handling and
storage of the agent.

14
en
Maintenance
Expected service life of the change table is 10 years, provided that
maintenance is carried out as described below:
It is recommended that service inspection is done once a year.
Maintenance inspection
1
1
11
3
3
4
4
Check the 4 wall mounting
screws ①and re-tighten if
necessary.
Make sure that the star lock
washers ② are firmly attached
to the hinge axles.
2
2
Check the adjustment of the 2
set screws ③.
Check the gas cylinders ④for
wear.

15
en
Trouble-shooting
Symptom Cause Action
The change table
does not stay in
upright position.
Gas cylinder is
defective. Contact Pressalit A/S or your local dealer.
The change table
top is not level. The set screws are too high/low. Adjust the set screws.
The set screws are
defective. Contact Pressalit A/S or your local dealer.
The star lock
washers are loose
or fallen out.
The axle can push
them out over time Use a hammer to put the lock washers back in place.
Replacement star lock
washers can be ordered,
article no. LB3502
Technical data
Materials Powder-lacquered stainless steel, Melamine
Disposal and recycling
The unit contains reusable materials. There are no known hazards or risks
associated with disposal of the product. All components can be discarded
after having been cleaned and disinfected. When disposing of the product,
we recommend that it be disassembled and broken down into different waste
groups for recycling or combustion.
Recyclable
components Material
Steel Steel can be recycled by being re-melted and included
as a secondary material in the production of new steel.
Plastics Use plastic sorting and recycling systems where they are
locally available, otherwise incinerating plastic has the
added benefit of generating energy which can be used
for, for example, combined heat and power production.